Delete The Rows Until It Meets A Cell With The Word "Date"
Mar 9, 2007
I am trying to make a simple program that will go down column A deleting the rows until it meets a cell with the word "Date" in the A column. When it has found that row I want it to delete that row also and then stop.
This is what I have so far
Sub FindAndDelete()
Dim row As Integer
Dim col As Integer
ActiveSheet.Range("a1").Select
If Range("a1") "date" Then Rows("1:1").Select
Selection.Delete
End Sub
I have a spreadsheet with about 225 sheets or so containing data. The date is in column J. I am needing to delete all the Rows that have a date greater than or equal to 06/06/08 and loop through all of the sheets.
I recorded a macro to find the date 6/6/2008, then highlight the row, then select the next 450 rows and delete them and it worked ok, but I don't know how to get it to loop through the sheets to the end.
I need create a macro to perform the following - I don't know if it needs to be an Excel macro or via VB. This is to speed a process up and eliminate any spreadsheet messing around for our "admin" staff - they are not good with excel at all!
So, I have a daily/weekly down load of a spreadsheet (exported from access).
* I want to copy the values of column AK to A * Then delete all entries in column D that equal 19, 20 and 6 * Then delete all entries in column AL that equal "A","B","C" or "D" but not "E","F" or "G" * Then delete entire rows where the value in column A is a duplicate within the list
I will call this spreadsheet, for the purpose of this exercise, the "Master". I now have another spreadsheet with values in that should relate to values in either (or both) columns A and B in the "Master". I need Spreadsheet 2 values to be highlighted as cross checked in the "Master" and then all those in the "Master" that do not appear in the 2nd S/S will be normal white cells thus showing that they need to be chased by our Admin staff.
I´m trying to do a macro that changes the color of all fonts in a row if the cell in the column "R" has the date lower than a specific one, something like this:
Dim Data2 As Date Data2 = Sheets("Sheet1").Range("today") Range("R12").Select Do While ActiveCell <> "" If ActiveCell < Data2 Then ActiveCell.EntireRow.Select Selection.Font.ColorIndex = 3 Else ActiveCell.Offset(1, 0).Activate End If Loop
But it just don´t work. The macro does that in the first row, than it stops. Do you have another code for this, or another way to do?
- Cells A4:A10 of sheet "Top Sheet" contain dates. i want B4:B10 to show the IRA value as of the date in column A: ____A__________|_B______________________ 4 | 09/22/2005 | $ Total as of date in A4 5 | 10/06/2005 | $Total as of date in A5 6 | 10/20/2005 | $Total as of date in A6 7 | 11/03/2005 | $Total as of date in A7 8 | 11/17/2005 | $Total as of date in A8 9 | 12/01/2005 | $Total as of date in A9 10| 12/15/2005 | $Total as of date in A10
- Cells A6:A12 of sheet 'IRA' also contain dates but not in the same sequence (some date ranges had several transactions), B6:B12 of sheet 'IRA' contains the transaction values during the date range: ____A__________|_B______________________ 6 | 09/22/2005 | $100 7 | _ _ _ _ _ _| $200.................................
I have a file in which the data is written in cell.
1g Injection Total 10mg Tablets Total 1.5% w/w Gel Total
i want the to delete the word "Total" from each cell so that i can use the vlookup formula to get the desired result from another file.if there is any solution.looking forward for the an easy and understandable reply.
I get a report each week that has a bunch of unwanted header info. It used to be static and the macro just deleted the first 49 rows. I recently found out that the header format changed and it's been deleting crucial data.
I need something that will find the words "Medical Center" and delete all the rows above it, however many that may be...
I can trying to let the user type a word in to cell A1 and then have Excel remove the rows that contain the word. But VBA below just seem to delete all nonblank rows?
sub delete2() Range("a2:a200").Select For Each cell In Selection If cell.Value = A1 Then cell.ClearContents End If Next cell Range("a2:a200").Select Selection.SpecialCells(xlCellTypeBlanks).EntireRow.Delete end sub
I need to build a macro which will look for a specific word say :"ABC" in a particular column say "B" and delete 5 rows including the row containing the word "ABC"
I have a spreadsheet that I need VBA Code to do the following
1) Delete all rows where the word totals appears in Column B for eg "Totals for Vehicles Stocked in 0706" "Totals for Vehicles Stocked in 0707" etc
2) Delete all rows where the value in col m is less than 45
I have written the code, but cannot get it to work-see my code below
Sub Del_TOTALS_Underaged() FinalRow = Cells(65536, 2).End(xlUp).Row For i = FinalRow To 1 Step -1 If Cells(i, 2).Value >= "Totals" Then Cells(i, 1).EntireRow.Delete If Cells(i, 13).Value < "45" Then Cells(i, 1).EntireRow.Delete End If End If Next i
Column A's rows are merged according to column B. E.g.
Column A:
Row 1-7 (merged) Ron
Column B:
Row 1: New Jersey Row 2: New Delhi Row 3: New Jersey Row 4: New York Row 5: New York Row 6: New Jersey Row 7: New York
My result should be like:
Column A:
Row 1: Ron
Column B:
Row 1: New York
and similarly for other rows also.
PS: The no. of rows merged for column A can be different.
Also the keyword that should be present in Column B should be according to hierarchy, New York, New Delhi and then New Jersey i.e. first the macro should check for New York, if its present (in 1st 7 rows according to example given) then New York should be written in Coulmn B, if New York is not present then it should check for New Delhi and New Delhi should be written in Column B and if New York and New Delhi both are not present then it should check for New Jersey.
There are only 3 keywords which need to be checked i.e. New York, New Delhi and New Jersey.
If these 3 keywords are not present then the macro should not do anything.
I've seen a few threads on here about this issue but none of them do quite what I am looking for. I'd like for a single page "report" to be created when a user presses a button (which runs a macro, of course) The macro should be able to run through certain named sheets (even if hidden) and if a cell in any row is red within a sheet then the entire row or rows that meet the criteria should be copied and pasted into the Report sheet.
On the report sheet, for each sheet that has had rows that were copied, I'd like to have the name of the sheet as the header above the pasted rows so that the user knows which sheet the data came from. Any sheet that doesn't have red cells would be excluded from the report. I've attached a sample file but had to limit the number of sheets because of Orgrid's file size limit. Hopefully, you'll see what I am getting at here.
I am trying to create a macro to accomplish the following task. Delete if the value belongs to queue "ab cd ef" and is also a part of category "xxx xxx".
I wrote the following code, but it seems it is doing some mistake:
Code: LastRow = Range("Z2").End(xlDown).Row For i = 2 To LastRow tempQueue = Range("C" & i).Value tempRange = Range("Z" & i).Value If (tempQueue = "ab cd ef" And tempRange = "0 - 1 day") Then Range("C" & i).EntireRow.Delete
[Code] ........
The above code works fine but it deletes only 120 rows out of 200 or sometimes 150 out of 200. Can't get it to work all 200 rows.
I'm trying to figure out the best way to pull information from different worksheets. One field which I require has slight alterations between the sheets. I'd like to delete everything in the cell except for the very first word.
Here is a simple example (and I'd have this all through column A for instance)
Cell A1 = Multiple words here
Lets say I want to delete everything in the cell except the word "multiple"
I searched the forum the last couple of days and got the following formula: =RIGHT(TRIM(E3),FIND("~",SUBSTITUTE(E3," ","~",LEN(TRIM(E3))-LEN(SUBSTITUTE(TRIM(E3)," ",""))))-1)
However that is leaving: "228 PENICILLIN VK 250mg 28". Unfortunately I need to get rid of all of the first word.
I wondering if it's possible to create a code to have a popup where the user can enter a date in mm/dd/yyyy format and then all rows containing that date will be deleted.
I have tracker, where Cells in Column F have dates or are blank.
I am trying to run a macro to delete all rows when the following criteria apply:
for all cells in column F, if date < 1-Oct-2013 then entire row should be deleted if cell is blank - nothing should happen This is what I got so far - but it is not working...I have entred the date "10/1/2013" in cell AA2 but macro should always check against that date (not variable) so it might not be needed.
Sub PART3_Delete_old_team_members() Columns("F:F").Select Selection.NumberFormat = "m/d/yy;@" Dim endrow As Integer On Error Resume Next endrow = Sheets("Global Team List").Range("F900").End(xlUp).Row Searchdate = "AA2"
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
I am trying to add the tuition to be reimbursed if the claim date is on or after a certain date and then deducting the total from a set amount. I have included a simple example. I tried a formula from the pierson examples but Im doing something wrong.
I'm trying to Multi-Select rows in order to format all rows, in "One Step" if the cell in col. "A" = 1. I managed to write the hereunder code but I'm still frastrating because I don't like the first RNG setting command. How can I avoid declaring RNG as row(1) and still be able to run the code. I assume I need some other Range set for RNG which, unfortunately, I could'nt find and the command I used includes row1 in RNG although cell A1 = 5.
Sub Conditional_Multi_Rows_Select() Set RNG = Rows(1) ' this is my problem LR = [A65536].End(xlUp).Row For R = 1 To LR If Cells(R, 1) = 1 Then Cells(R, 1).EntireRow.Select Set RNG = Union(RNG, Selection) End If Next RNG.Select Selection.Font.Bold = True Selection.Font.ColorIndex = 3 End Sub
I had in mind to use:
Set RNG = Rows(65536) but this will not make it a "neat" vba code, either.
Have a sheet with 24K rows. Column A is client name. Column B are check dates. The info is sorted by client then check date. Clients can have one to many check dates, so I client is listed as many times as there are check dates. If ten checks, then ten rows for that client. One check then one row for that client.
I only want to keep the last/most recent check date for each client, deleting all other rows for that client with check dates before the most recent. I believe I need to step through the file comparing column A, row by row, to see if I have a match for the next row in A. If no match I keep that row, because there is only one check, and move down one. If a match, then I delete the current row.
I was wondering if somebody could help me with a little bit of code?
When the sheet is opened, I would like some code to search down column A, starting from cell "A5" and delete all rows which contain a date which is greater than 7 days ago.
The dates are in order from the most recent being at the top.
For example:
Today is 29/01/2010, I would like all rows which have a cell in column A containing Today-7() to be deleted. 28/01/2010 to stay. 19/01/2010, delete row.
