How do I convert all this to times (Hours worked)
I know if I change the format to TIME to total hours does not add up correctly
i.e.
41.53361078
56.47083288
73.12722164
45.45944408
58.28749953
73.75777719
70.7266661
57.02361065
49.52916627
62.88527727
Total 588.8011064
When I enter L into B3 I want B3 to show a message.
i.e. B3 is blank, I enter L into B3, it the changes L to 0645 - 1515.
And it needs to be in time format so at the end of the roster i can add how many hours in total.
1) The output of an excel duration is : 22.00:8.00:25.00 ( day:hour:minutes ) - excel cannot average and work with this number format
2) resolution - =(LEFT(L2,4))+MID(L2, FIND(":",L2)+1,4)/24+MID(L2, FIND(":",L2,7)+1,4)/1440 as an array and Custom Format the cell as [h]:mm - works perfectly.
Q: to be conistent, the initial reporting is dd:hh:mm and then I convert to hh:mm so that excel can process the data. How can I convert from hh:mm to dd:hh:mm so that the excel report can be consistent in presenting the data to senior management?
example attached.
I have a time calculation in E2 that is a result of a number multiplied by at time the results are nearly always over 1,000 hrs
I have the below formula to display the results in the format of Hrs and Mins but it isn't displaying correctly ie the number in E2 is 1666:40 so it should read 1666 Hrs 40 Mins but its displaying as 10 Hrs 40 Mins
=HOUR(E2)&" Hr"&IF(HOUR(E2)1,"s "," ")&MINUTE(E2)&" Min"&IF(MINUTE(E2)1,"s "," ")
Format Time Cell For Greater Than 24 Hours: Hours & Minutes Only .....
View 9 Replies View Relatedi am looking to do a table which shows time started, time finished and then a total for hours that day, then that week.
Start 08:00
End 16:00
Total 8 hrs.
How can I get the total to display as 8 hrs? not 08:00? When I change the format to "number" it shows 0.33?
Having trouble adding a column of minutes and converting the total into hours and minutes. Say Cell A1 through Cell A18 each have 12 minutes in each cell. I want cell A19 to tell me how many hours and minutes of total time that have elapsed. I have tried hh:mm, [hh]:mm, but nothing works.
View 9 Replies View RelatedWe have a system called Datamart that outputs in excel formatted file.
The output of a duration is : 22.00:8.00:25.00 ( day hour minutes )
I want to be able to add, subtract, average, calculate the 10 fastest/slowests durations from a list of durations in this same format. I have googled and tried custom formatting but excel does not like this format. when I try to sum a range and divide by the number excel gives me 0.
I have a time calculated and I want to know, Out of that time how much is above or below 8 hours.
Ex. 1: 7:30 - 8 = [result] "-:30" mins
Ex. 2: 11:00 - 8 = [result] "3:00" hours
OR
How can I convert 7:30 into 7.5 [decimal] and then subtract that from "8" to get the difference?
I know this is an easy one, I have done it many times before. It's crunch time and I am drawing a blank.
I am trying to determine the total hours of downtime accumulated when there are 2 or more machines down during the same time period. To do this, I need to be able to determine if at any point there are 2 or more pieces of equipment down at the same time, and if this is true, how many hours were overlapped. The attached spreadsheet shows how the data is presented.
View 7 Replies View RelatedAny way to calculate the total hours staff work based on the mininum time of the first transaction to the maximum time of the transactions. I used a DMIN and DMAX function to get those times per employee. The issue is then the time goes over from one day to the next, such as from 11 PM to 4 AM the next day. As you can see in the data below,the fourth record shows the minimum time as 12 AM and the max as 11 PM with total time worked as 23 hours. In this example, the total hours worked should be five hours.
min time
max time
total hours
7:00 AM
16:00
9:00
[Code] .......
I have a column of tasks that take a certain amount of time to complete formated as h:mm:ss. I want to total the column and convert the total to days, hours and minutes. Is that posible and if so how do I configure a formula and format the cell? example:
task 1 54:00:00
task 2 20:45:00
task 3 27:05:20
task 4 51:10:45
total 153:01:05
How many days, hours and minutes?
How can I work out the following in hours an minutes: -
Cell A1 = 12th May 2007 20:00
Cell B1 - 14th May 2007 14:30
or should I put the dates and times in seperate cells? I would like the answer to show 42 hours 30 minutes
I need to calculate the difference between two cells that are formated like this: 11/10/2006 13:00. Simple subtract only works when the date hasn't changed (the subtract formula seems to focus on the time and ignore the date).
I found a formula that will work, but the results are in regular numbers, I need the hh:mm format and if I change the format of the result column, the time displayed is wrong.
The formula is=((B2-A2)*1440)/60)
If my result is 122.6 in regular numbers, when I convert to hh:mm I get 14:00.
Is there a better way to do this? Also, is there a way to eliminate weekend & holiday hours from the calculation? This is not as important as getting the results to calculate correctly in the hh:mm format.
I have used the format [hh]:mm in a cell for 24 hr clock calculations. Why do I have to enter the numbers with a colon when I populate the cells? Is there a way to set it up so I just type in the four numbers and the colon between the hours and minutes populates itself?
View 9 Replies View RelatedFor the past month now, I'm trying to calculate some work hours (night hours actually), based on a reference.
Let me show you the table:
- Column A has all of the schedules of the employees
- Column B has the numbers of hours for each schedule (all have 8.5 hours/day)
- Column C has the reference for the night hours.
Now what I'm trying to do, is to find a formula that will calculate the numbers of the night hours using the reference in Column C
Row 23 in that table has an example of what I'm looking for.
is there a way in VB to make it fast, and tidy, clear the contents of all unlocked cells on one sheet ?
View 2 Replies View RelatedThe attached file contains data. In Worksheet 1 (and also 2 and 3) column B2 shows day, month, year, hours, minutes and seconds. I was hoping to convert this to just Hours and Minutes, but all the usual methods using Custom Format does not work. This leads me to think that its in TEXT format. How can I change Column B2 to Hours and Minutes?
View 14 Replies View RelatedWhen I am converting a time from Hours/Minutes to Hours/Tenths, Excel is not converting it consitantely. EXAMPLE: 1:15 = 1.25. When I format the cell to present only one place past the decimal point, sometimes the cell will round up to 1.3, and other times it will round down to 1.2. What am I missing?
View 3 Replies View RelatedI have a column with times in it, it seems to be formatted to HH:MM I would like to change this to HH:MM:SS but it will not seem to change at all by formatting the cells, does this mean I will need to go through each individual time and change it to the new format or is there some sort of work around?
View 6 Replies View RelatedNeed to Change date and time Format.
23 June 2013 14:02:10 BST
" 23 June 2013 00:47:58 BS"
23 June 2013 13:22:21 BST
23 June 2013 13:22:21 BST
Find the attached dump : jlr.xlsx
Required Output
06/23/2013 14:02
provide an easy way to accomplish the following, turn a list like this:
5827627905072:36
5827557905112:37
5827447905152:38
5827507905282:39
5827307905312:40
into a list like this:
582730790531240
582735790543241
582715790545242
582722790563243
582707790565244
582706790570245
582692790588246
where the time is essentially text or a number now
I have a consolidated sheet which I maintain to keep track of the scores of my team. Unfortunately from time to time, the format of all the cells is getting changed to "time" value. I do sometimes use an addin which I have downloaded from Straxx.com (excel password remover) and I am not sure if this add-in has anything to do with this.
I am having to change the format of almost 20+ columns every time this happens.
find a formula that will calculate the hours between the two below values but only take in to consideration the business hours (from 9 to 17) and exclude any weekends?
08/03/2013 13:32:00
02/04/2013 09:32:50
I am making a schedule and I would like it to take out a 30 min break if the hours worked is over 6 hours.
I have so far
A B
1 11:00 7:30
=24*(B1-A1)
Gives me 8 hours, I would like it to subtract the 30 minutes only ifthe sum is over 6 and not alter the sum if it is under 6.
I have a time format in one excel sheet, I need a macro or a formula to change it into a specific format, this is to be able to import it to another software.
I have attached a file here you can see an example, this I manually, I want Row D and E into the format in A, I s it possible to make it in a macro or formula, manually it takes a long time.
File Type: csv TimeFormat.csv
formatting the sub-row header of the table also changes one of the columns.
View 6 Replies View RelatedIn cell BQ65, I have 7:00 pm. Next to that, in cell BR65, I have 6:00 am. This should total 11.00 hours, yet with the formula I have in cell BS65, the result is showing up as 13.00 hours, so I'm ending up with two extra hours, which is not good.
Here's the formula I have in cell BS65:
=IF(ABS((((BR65-BQ65)*1440)/60))=0,"",ABS(((BR65-BQ65)*1440)/60))
This vba code is supposed to move the cursor to the Cacluate1 command button when the user clicked on cell H6.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Address = "$H$6" Then Calculate1.Activate
End Sub
The only changes that I have made is a change to a private sub worksheet_change(ByVal TArget as Range). Would these changes have anything to do with this no longer working?
I need to calculate below hours
07:50
07:50
07:50
07:50
07:50
The answer suppors to be 37:30 Hours but its showing total diffrent value. i used sum(E1:E5) Excel formula, but its not working.