This vba code is supposed to move the cursor to the Cacluate1 command button when the user clicked on cell H6.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Address = "$H$6" Then Calculate1.Activate
End Sub
The only changes that I have made is a change to a private sub worksheet_change(ByVal TArget as Range). Would these changes have anything to do with this no longer working?
All of the sudden, I've started having issues on one PC with Excel opening CSV files.
I work with these files every day and they work on other computers.
The problem is that if the field value starts with a dash, Excel will not show any records before that. Meaning, if there is a record on line 50000 that starts with a dash, it will not show the previous 49000 records.
I can open the file in Notepad++ and find all '- and replace it with ' and it will work fine. But I have hundreds of files.
This just started. I'm using using Office 2010 x64. I'm tempted to get Office 2013 to see if this will resolve it as something has obviously went wrong.
In the past, I would open the CSV files just like any Excel file and NEVER any issues. I would do this with multiple files each day but even the file that I use to not have issues with in the past is now an issue if it has a dash in a field.
I can't attach the file as it is too big for the site. The file has a front sheet called "Viewer". The filters at the top used to work. They would reduce the results in the table underneath. For some reason this is no longer working.
It uses the lookup tables on the Lookup tab but then uses arrays I think.
I have a macro that used to create a new book for each of the worksheets in a workbook that would name them the same as the worksheet.
Since our company upgraded to Windows 7 the macro, more often than not, fails to work.
The code for the macro is
Code:
Sub NewBook1()
'
Set wbSource = ActiveWorkbook
For Each ws In wbSource.Sheets
ws.Copy
Set wbDest = ActiveWorkbook
wbDest.SaveAs strSavePath & filePrefix & " " & ws.Name & " " & fileSuffix
wbDest.Close
Next
Application.ScreenUpdating = True
'
End Sub
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. And I have turned Events and ScreenUpdating on.
I would also like to note that it won't allow me to perform actions like unhide sheets or unprotect them. The code has not been changed either so what has happened to disable all functionality.
[URL] .....
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. I have turned Events and ScreenUpdating on.
View 2 Replies View RelatedI have a command button on my form that unloads it when i am finished. But i have to press it 20 times before it closes. The only line i have in the code is "UnLoad Me"
View 7 Replies View Related[Code] ....
In column F I have a list of dates (dd/mm/yyyy).
I can manually filter dates ok, but want to set it to part of code to use automation for a report.
The code when run, finds nothing, where it should. I tried using [CDate] also but also same result.
I'm try to get the pos. placing in a auto sorted table to remain in place
i.e. 1st next to the top position. 2nd next tothe next position and so on down. but it keeps getting it wrong! I've tried amending the macro serval times but it makes things worse! Sorry can't attach the file, too big for this forum!!!!
I am using a multi-column listbox on a worksheet. When I select an item from the listbox, the value from the listbox first column should populate the first empty cell in a range of cells L:16 to L:25. This should be easy but I cannot get it to function. Below is the code I used prior to modifications I made to the worksheet.
VB:
Private Sub ListBox1_click() 'allows user to select item from list box and paste to datagrid
Dim lngLastRow As Long
Dim lngcol As Long
[Code]....
I have a list a time (HH:MM:SS) that i want to sum together to get the total number of minutes.
It works if I use simply add A2+A3+A4 etc, but not when I use sum(a2:a4).
There are over 2500 lines of data.
Sheet attached : times.xlsx
I'm compiling a list of names on a separate tab from a column that only lists the names sporadically. Problem: In the formula, the IF provides a TRUE, the row function, and consequently, the INDEX function (when I hit F9) provides the correct "name" and row number, but when I hit return, it provides the text 4 cells beneath what it should.
=IF(ROWS(F$5:F5)
In an effort to manipulate the xml documents within an xls, you used to be able to change the extension to .zip then open. This no longer works for me, just getting the 'cannot open file: it does not appear to be a valid archive.
I have tried it with a number of different files, but no joy.
It still works with a .doc so I guess it's not that Microsoft have stopped this capability?
Using Excel 2007
How do I convert all this to times (Hours worked)
I know if I change the format to TIME to total hours does not add up correctly
i.e.
41.53361078
56.47083288
73.12722164
45.45944408
58.28749953
73.75777719
70.7266661
57.02361065
49.52916627
62.88527727
Total 588.8011064
I'm using the following code in a worksheet:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
col = ActiveCell.Column
Range("output") = ActiveCell.Offset(0, -(col - 4)).Value
End Sub
In case it's not obvious, the macro places the value in the active row and 4th column of the worksheet into the range "output".
The problem is, the worksheet is large and somewhat slow to recalculate. This macro forces a recalc on any selection change, but i only need it to run when the row selection changes, not the column.
I'm sure there's a straightforward way to reprogram this.
After Format > Column > Autofit Selection, the cell width is STILL not sufficient. Values with many digits do not show up in the print out (only ######s appear). What should I do?
I try the following selection
Columns("B:AF").Select
Selection.ColumnWidth = 2.3
It is selecting columns a to af. Why would take column a if it is not part of select?
Sub Add_worksheet_month()
Dim Lst() As String
Dim I As Integer
Dim wname As Date
'Dim wmonth As Date
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Why this code doesn´t enter in the if condition when i don't select any item from the listbox
semana = ListBox1.Value
If semana = Null Then
MsgBox ("Need to choose one item!!!")
Else
emd = Range("A48").Value
End If
This one has really got me stumped:
Sub NCR()
Application.DisplayAlerts = False
Workbooks.Open ("J:AcctMgt3NWFMScriptingScriptsDailyReportsNCRNCRvdn.xls")
Sheets("NCRvdn").Columns("B:B").EntireColumn.AutoFit
dRow = Sheets("NCRvdn"). Range("B1").Text
dMonthDay = Format(dRow, "mmdd")
dDay = Format(dRow, "dd")
dPrevDay = dDay - 1
dMonthName = Format(dRow, "mmmm")
dMonthNum = Format(dRow, "mm")
dYear = Format(dRow, "yy")
dPrevDay2 = dMonthNum & dPrevDay.............
This opens the first file and dRow="7/13/2006". The next file that it opens contains links to information from the previous days. Without VBA you just drag the previous day down, select the row of data and do a replace all, say from 0712 to 0713. As you can see I even tried to make it use the specific data I wanted versus the variables; still doesn't work. What really gets me is that if I go back to the sheet after this code runs, I go to EditReplace, replace all "0712" to "0713" and it does it. It has to be the code then right??
Some very basic
Cells(293, 1).Select
Nothing complicated at all in that. Yet if I put it in the code for a particular Excel sheet, it doesn't always work.
Same with
Range("A293").Select
(Yet wierdly, to confuse matters, very occasionally it does work)
If I put exactly the same code in Procedure 1 in Module 1 and call Procedure 1, I never get an error, and the code executes absolutely fine.
But I have to keep setting up procedures and referencing them for, quite frankly, code which should work no problem.
My user wants to change it so that, when the word "Triang" is selected from a dropdown box on each line the formatting goes back to none......or ClearFormats.
Can this be done with a Worksheet_selectionChange or similar.
I can't even get my head around this at the moment.
What the user is saying is, if the Formats haven't been cleared on certain lines, the user of the sheet hasn't addressed the needs for that particular line.
For r = lrow To 15 Step -1
If Range("M" & r).Value "" = True Then
Range("N" & r).Value = "Triang"
Range("N" & r).Interior.Color = vbRed
Range("V" & r).Value = "Triang"
Range("V" & r).Interior.Color = vbRed
End If
Next r
I'm trying to write some code where if the user hits the Enter key on a particular cell an input box pops up. At the moment I've got some code that activates the input box whenever the user selects or scrolls over the cell. The problem is that the cell is a protected cell (as it has a formula in it) so double-clicking isn't an option.....
View 8 Replies View RelatedThe following macro will put a checkmark in the range of A2:B100. I would like to use the current macro along with two or more other Worksheet_SelectionChange. One of the SelectionChange to put "Williamson" in the range of L2:L100 and another SelectionChange to put "Michaelson" in the range of M2:M100? Is it possible to use more than one Worksheet_SelectionChange
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Const WS_RANGE As String = "A2:B100" '
I am getting US formatted dates with this procedure, I require UK dates, but I don't understand why its giving me US format
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
If UCase(Sh.Name) "ALL BILLS" Then Exit Sub
With Target
If .Row > 5 And .Column = 19 Then
If Cells(.Row, "B") = "" Then
Else
Application.EnableEvents = False
Cells(.Row, "S") = "CLOSED"
Cells(.Row, "E") = Format(Date, "DD/MM/YYYY")
Application.EnableEvents = True
Range("E:E").EntireColumn.AutoFit
Range("S:S").EntireColumn.AutoFit
End If
End If
End With
End Sub
how can i change nonworking date from saturday&sunday to frinday&Saturday
View 11 Replies View RelatedI have a worksheet that needs a lot of inputs to calculate something for the user. However one of the inputs is the date. I wrote code to insure that the date entered is only a 4 digit integer number (i.e. 2009). However I want this code to be used only if a certain cell (Cell(3,3)) is modified. Right now if the user enters anything in any cell this code brings a pop not just for cell(3,3).
View 4 Replies View RelatedCells in Column M have a data validation drop-down list. If the user selects 'Closed', I want this code to run:
View 12 Replies View RelatedIn this file, I have a Work Summary worksheet in which I'm extracting some data from the other worksheets to "summarize" all jobs into one nice work summary log On Basis of Average of data from 3 other different sheets A,B,C
The following form works great to if onyl formula calling is applied
=AVERAGE(INDIRECT("'"&$C6&"'!c3:c7"))
C6 = Worksheet name or Worksheet tab name ....
how to Keep Selection in Column But Change to 2 rows less. I have the following code that works.
View 2 Replies View Related