I have a chart where half the users want a black backgroud and half want a gray background. Is there a way I can change the chart colors based on a textbox value? I would have the user choose a value (say, "Dark Background or Light Background") and then, upon commencing the macro it changes the chart.
View 4 RepliesThis is my first post and i am new to visual basic in excell even though I got a little bit knowledge of visual basic access, please do not get annoyed at me for making stupid mistakes.
I wrote the following ...
I have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
How do I change the color of a row, based on the users selection from a drop down box in that row? I have four driving types in my drop down , Towing - Town Driving - All highway - Mixed. I would like each driving type, if selected, to change the color of the entire Row of Data to a different color. I have been able to use conditional formating to change the drop down cell itself, but that is it.
View 1 Replies View RelatedIs it possible to change those AutoFilter drop-down arrows that are active? As it is now they are hard to spot which is in use.
View 5 Replies View RelatedI'm using Excel 2007.
I have a field with a "YES"/"NO" drop-down box. There are three fields below which have some default formatting (thick purple dot-dot-dash borders). When the drop-down field is "YES", those three fields should change borders to a single thin black bottom border line.
OK... so that's the setup. And I should note here that it does in fact format properly. However, the problem I'm having is that the screen does not update / repaint with the new formatting. The thick purple dot-dot-dash borders remain, for the most part.
If I page down, then page back up, the new formatting appears just fine. When I switch from "YES" to "NO", again, the formatting changes, but the screen does not update/repaint so the only way to see the new formatting is to again... page up and then page down again.
I'm wondering if anyone knows a way to force the screen to repaint/update so that my users will see the new formatting without having to page up/down.
I have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.
After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.
I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.
In my Excel 2003 worksheet, I need the row color to automatically change to blue (color 5) (bgcolor = #0000FF) - when the user changes the text from VALID to INVALID in the range: B3:B65000.
For example:
Cell B5 contains the text: VALID
When the user changes the text in the field to read: INVALID - then I need the row range: A5:W5 to change to the color blue.
I would like to be able to change the color of a cell in V4:AB31 and have the formula in AM10:AM13 automatically calculate the new result. As it is now the user has to press Ctrl ALT f9 for the formula to recalculate.
View 7 Replies View RelatedI have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedI have font color white in blank cells in column E and I (from row 5 to row 245) so the visitors will not see the text. If any of these cells become yellow (color code is 6), the font color will become black so visitors can see the text alot far better than white. I've tried this code myself after this post but nothing happen
View 4 Replies View RelatedI have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
I'm working on a charting application that uses Office charts. I'm wondering what are some of the main reasons people change the base unit from the default, and how common that is.
Some reasons I've identified on my own:You're comparing different monthly metrics, but they could be recorded on different days of the month.Get a zoomed-out view.Compare the max value of each month.
Is it possible to make a copy of a chart that is edited simultaneously as when you edit the original chart...somewhere else in the same workbook.
View 1 Replies View RelatedI have a list of salesmen and their performance to date (on a percentage basis) which is sorted lowest percentage down to highest. What I would like to do is to graph this as a bar graph (no problem there) but for the bars to be replaced by the names themselves! So, I have data like this:........
View 3 Replies View RelatedIs there a way to color fill a drop down box in Excel 2003? I have a workbook where info is flilled in on the first sheet, affecting the remaining sheets.
I want all areas that need input on that first sheet to be color filled in Yellow.
I have a drop down box that shows progress of a project. The options in the drop down box are 0%, 25%,50%,75% and "Completed" - I am wanting to make it so when i click the desired option in the drop down (say 25%) it makes 25% of the cell show green (or completed)...all the way to when I click "Completed" then it will make the cell 100% green. I am trying to show a percentage of something getting done by way of color.
View 6 Replies View RelatedThere is POLICY statement that determine an what ACTION should be applied to a paticular building given a score for "LIFE" & "RISK" which results in varing policies A-D. (The Policy intervention points differs slightly for varing types of building. This excel sheet works just fine, and provides the correct guidance for our engineers by suggesting Policy A-D on input of tbuilding type and LIfe/Risk score. However the Policy is a guide, and they do need to apply a level of judgement with the data close to intervention points.
My Question,
I would like to provide further graphical representation to aid decision making. I have a graph plots the X Axis ( LIFE) 0-100, and y Axis (risk) 0-5 and show the , but what i need to be able to do is dynamically adjust the position where the x&y axis cross, so showing visually the intervention point when different building types are selected.
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedI've been using a VBA code to look through my spreadsheet and find any graphs in any tab and move it to powerpoint. I have about 70 tabs with 7 graphs each.
I have is that the order of the graphs in the slidepack isn't in the same as found on each excel tab.I also tried renaming them (chart1-chart7) but problem still remains.
When using the autofilter, the drop-down arrow turns blue in color, i.e., when some filter citerion is being used, the small down-arrow turns a different color as a way of informing the user that a filter is in place. Is there a way to control the color of this? Currently, mine turns blue, but it would be more useful if I could change it to a brilliant color in order to make it contrast more with the default black. Blue is too difficult to be distinguished by my eyes. The autofilter is turned on via a macro. If there a line of code that controls the color.
View 2 Replies View RelatedI have a coworker trying to create a dropdown list and is using wingdings for the checkmark, x, and other symbols for filling out for. Everything works great except when you click in the field the drop down box doesnt show the wingdings font but the corresponding arial font. Is there a way to change the dropdown box to wingdings because currently the dropdown box shows various 'u's with different grammatical stresses.
View 2 Replies View RelatedIn Excel 2007; I need my drop down list to then change the next cell down to a series of different values? How do i do this? i have created the drop down list, but can't link the values to the item selected in the drop down list. The JPG attached shows a basic set up of what i am trying to do: The drop down list contains various product models (yellow) Once selected this then changes the m2 value (red) which is linked to the formulas in orange; product factor is entered manually.
View 3 Replies View RelatedI have 18 drop down lists that are identical and named DropDown1, DropDown2, DropDown3, etc. Each one references cells (cell link) E1, E2, E3, etc respectively in another worksheet Lookup that is hidden. I am trying to write up some code that when the user selects any drop down, depending on which one it is, it passes certain values to another Sub which has cases. I got my first ideas from an old thread Drop Down List Box but there were no variables being passed.
My code originally worked with one variable being passed (x), but now I am trying to pass 2 (x and nrow) and I get an error in the Sub DropDown1_Change(): ByRef argument type mismatch. Below is my coding, I only included a few drop downs for this example. The Cases are based on the cell link (ie Case 2 is when the cell link shows '2' in the Lookup sheet) I only used a message box for testing purposes. I will have to do some other stuff but I need these variables passed first before I can continue
Public x, nrow As Integer
Sub DropDown1_Change()
x = 1
nrow = 2
Call get_surcharge(x, nrow) 'this is where I get the error
End Sub
Sub DropDown2_Change()
x = 2
nrow = 3
Call get_surcharge(x, nrow)
End Sub............
I inherited a spreadsheet with a combox box, drop down list for user to select a project by name. The cell right below uses a lookup function to select the code listed with that project name from a list on a separate worksheet. When I edit the codes on the list used as the source for the lookup, the new code will appear as it should.
I want to edit the drop down list that appears in the combobox. I cannot find the source for the drop down list. Any ideas where/how to look for it?
I have two drop down menus: Class Name and Class Period.
Class name returns reading, math, science, or social studies.
Class period returns 1,2,3, 4,5
I need a formula for a cell that will return the name of the first student in whatever criteria is selected by the two drop down menus.
Example: If reading 2 were selected, I would want the name of the first student in reading period 2.
I did start out with nested If's combined with ands, but that is too many nested ifs. I figured there was a better or easier way to do this.
Formula I thought of: =IF(AND(G3="Reading", H3=1), '[Reading 8.xls]Sheet1'!$A6, IF(AND(G3="Reading", H3=2), '[Reading 8.xls]Sheet1'!$D6)) etc.....
But if I use that there would have to be 20 nested ifs, which I think I read someone nested ifs cap at 9.
I have 13 sheets in my workbook (one for each month plus a GlobalSettings). In each month sheet I want to create a change event that prompts a UserForm when they select "Yes" from a drop-down validation list if it happens to be a month prior to the current month.
This is the code for the change event:
I am busy with a project using VBA to populate a spreadsheet based upon the data entered into a particular cell. The problem that I am experiencing is that I populate the initial cell via a combo-box which I cannot exit unless I click elsewhere with my mouse. The code that I am using to populate the other cells is as follows
Private Sub Worksheet_Change(ByVal target As Range)
Application. ScreenUpdating = False
On Error Goto dump
Dim r As Range, MyRowNum As Long, ws1 As Worksheet, ws2 As Worksheet, strPriCode As Variant, _
strNAPPIE As Long, strSInCost As Currency, strSInDesc As String
Set ws1 = Worksheets("SINVOICE")
Set ws2 = Worksheets("STOCKIMP")
Set r = ws1.Range("B11:B35")
If Intersect(target, r) Is Nothing Then Exit Sub
If target > 0 Then....................
I am looking to have the Cells that I have applied a Dropdown List to update with the changes that I make to the list itself.
Example:
If I were to validate a list with a range of a1:a3 using "Bob" "Sarah" "Bill" and then apply that list to B:B and randomly select from the three names running the length of B:B, I would want that when I go back to A2 and change "Sarah" to "Linda" that every "Sarah" that I have selected using the drop down will update to say "Linda"
I hope that I am explaining myself clearly and in a simple context.
i need some code to be able to toggle design mode, i am creating embedded flash games in excel and i want to be able to change the game using a drop down and this code:
View 3 Replies View Related