I want to make a spreadsheet with bets of mine and my friends (picture). How to make cells D4, D5, etc., change to Win or Loss depending on the result?
Attached Image : Bets.jpg
The following code works perfect but the "change" event is only triggered when working directly on intersect range. Tried using the "calculation" event but could not figure it out. This is what I want:
1) To replace the code provided below using the calculation event
2) To only trigger the event for the row(s) where the new value was generated, not for the whole "For Each" statement
3) To use one single code for all worksheets, instead of copying the code in every working worksheet on the workbook, if feasible
4) And I would like a "second alternative", where the user of the workbook can click on a button and trigger the event on every row on the workbook that has a non empty cell within the intersect range, assuming that the intersect range column is the same for all worksheets
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range, d As Range, fc As Long, bc As Long, bf As Boolean
Set d = Intersect(Range("I:I"), Target)
If d Is Nothing Then Exit Sub
For Each c In d
Select Case UCase(c)
Case "C"
fc = 1: fb = True: bc = 4
Case "O"
fc = 2: fb = True: bc = 3
Case "D"
fc = 2: fb = True: bc = 46
Case "G"
fc = 2: fb = True: bc = 5..................
I have figure A1 column which total amount accounting at cells A31. I need figure 360 as a benchmark calculation perfectly been done. In this calculation 360 well off inside cells A18 although actual number is 363. If we use Conditional Formatting when had enough total in cells the achieve 360, cells colour will be transformed to red. What formula which need I used to change no matter cells on A1 to A30 if sufficient study 360 automatically cells changing colour to red
View 5 Replies View RelatedI have excel result sheet which contains students information. i.e. name, subjects and their corresponding marks, grade, percentage etc. So from that sheet I want to print result cards for each students separately from the data (result sheet).
View 4 Replies View RelatedAny way to automatically update my spreadsheet align all of the cells in the correct row/column.
Attached is a sample sheet. Columns A-D show how they originally look. Columns F-I show how I would like them to appear.
SAMPLE.xlsxβ
In a worksheet I want that a link changes, after I change a value in another cell.
Example:
When cell A1 is 2006_04 the link should be:
C:/2006/2006_04/[...xls]Page1'!A1
When cell A1 is 2006_05 the link should be:
C:/2006/2006_05/[....xls]'!Page1!A1
When I do a SEARCH operation to find the number 10 among hundreds of cells containing data, I'm often finding the way Excel highlights the cell that meets the search result is not easy enough to see.
Is there anyway I could setup Excel so that the resulting cell that meets the search result is highlighted in a RED border or RED Fill? I would like the cell that meets the search result to scream at me with a color highlight that is not easy to miss.
I want to change the location of a hyperlink based on the macro I am running.
Parameters:
1. Hyperlink is activated by clicking on a textbox
2. These hyperlinks are only linking to other tabs within the same worksheet (i.e. if Macro1 is run, hyperlink links to Sheet2; if Macro2 is run, hyperlink links to Sheet3; etc...)
Question: How would I write this in VBA?
How can I copy the result of a cell into another cell automatically.
I have a formula that builds a description of a product using the contents of a bunch of cells
I can copy and paste the value but how do i get the cell to do that by itself.
When I enter a formula into a cell, for instance; (d27*d28/144)*d23, and then enter a number into cell d23, the formula gets replaced by the value of the result automatically.
I've searched the help files and found no setting that does this. It reminds me of an old question I've had lingering since I've used excel and that is why sometimes when you enter a math calculation, for intance; =25/5, the number 5 is entered into the cell instead of the formula.
After I posted the above, the problem magically went away until.....
This is boggling my mind. The problem is back.
The wierd thing is I copy a known good formula to one of these cells, for a split second you can see the formula in the formula window and then it gets changed automatically to the result of the formula. Formula is gone!
Then I tried this:
I set security to high (I had it on Low) and of course my macros would not run, but this did not clear up the problem. However when I set security back to low, it now seems to be working good. I am scepticle (sp.?) though because the problem is very random.
Could I have a virus?
Is it possible to stop the #REF! error appearing in my formulae when I make a change to my spreadsheet? I have some complicated spreadsheets that take a lot of re-building whenever I need to make changes because of the #REF! error. I tried turning off automatic calculation and that seems to work, until you calculate, then the errors appear. I find myself copying formulae into a text file and then re-pasting back into the spreadsheet after making the changes - there's gotta be a better way! (Using Excel 2003).
View 9 Replies View RelatedI want to be able to enter a value into a cell (within a specified range) and have it automatically multiply by a set value and overwrite the original entry with the result so making it all happen within one cell. The set value would be another cell on that sheet.
So the range for example is "H17:H74" and the value I want to multiply by is "D8"
Is this possible?
I've looked at another forum but it wasn't working when I wanted to define the set value as a cell.
In the following sheet I'm tracking daily numbers against a monthly total. In the cell E4 for example I have a minimum per day number needed which is based on the monthly goal divided by the number of days availble to work. What I would like to be able to do is have the number auto-adjust if a letter (i.e. V=Vacation, S=Sick, etc...) is used in place of a number on any given day.
I have been using the following to change the year in the Header
Code:
Sub Change_Format()
' Ctrl-y will change the year per individual sheet
ActiveSheet.PageSetup.RightHeader = Format(Now(), "YYYY")
End Sub
Is there a way to have this done automatically? There are absout 6 sheets in the workbook that have the year in the header and right now the code is in Module 3 and I have to press ctrl+y for every sheet.
How do I stop my sum formula from adding to it's range every time I type a number in? I have 12 columns of numbers by date and 4 quarter columns at the end totaling each of the 4 quarters. If I start typing directly across, the 1st quarter sum formula updates to include every number in the first 12 columns. The other quarter column sum totals stay the same.
View 7 Replies View RelatedI have 2 Excel Files. In the main file I have a macro that copy/pastes data from the secondary file. The secondary file is a daily file that gets its file name changed every day (eg. 14OCT09.xls).
The last piece of the Macro goes back to the secondary file and ends with:
Windows("14OCT09.xls").activate
Range ("A1").Select
Now tomorrow, I have to manually edit the Macro and change the code to 15OCT09.xls before I run the Macro. Is there a way to automatically change this date without having to manually edit it on a daily basis?
What i would like to do is Hide Rows Based on Cell Value in Multiple Sheets & Multiple Columns
and i need the macro to be fast
Sheet1
If the value in Range BE11:BE160 equals 1 dont hide the row
If the value is 0 or then hide the row
Sheet2
If the value in Range BE11:BE160 equals 1 dont hide the row
if the value is 0 or then hide the row
Sheet3
If the value in Range BE11:BE160 equals 1 dont hide the row
if the value is 0 or then hide the row
Sheet4
If the value in Range O1:O150 equals 1 dont hide the row
if the value is 0 or then hide the row
Sheet4
If the value in Range B1:B150 equals 1 dont hide the row
if the value is 0 or then hide the row
I currently have an excel file set up which is refreshing imported data every minute from a server. This data is located on " sheet 1".
This data is the result of another system constantly monitoring (pulling data from) the process at my factory. It consists of temperatures, speeds and other settings.
When a temperature, speed or setting changes then it will be captured by the monitoring system and therefore my excel sheet will load it into the imported data within the next minute.
I would like to be able to capture the change in temperature, for example, if it goes into alarm and automatically send an email reporting this alarm. This alarm is captured in my imported data in a specific column with a 1. If it is out of alarm it is 0. There will not be a report of an item, at any one time, with both a 0 or 1... so there is only one case of any one monitored process.
I have a pivot table set up to filter all the uneeded data out and I currently refresh it manually to show the current status of all alarms. If an alarm occurs on the process, I can refresh my pivot table and it will be indicated with a 1 until it is refreshed again (and the alarm is gone).
So the question:
1. How can I refresh the pivot table automatically every x seconds?
2. How can I automatically send an email on the value change from 0 to 1 in case of an alarm?
I have attached a document paralleling a document I am working on. The dollar amount in each spreadsheet represent sales. I have entered in values into the candy, soda, and chips spreadsheet. I have also linked values for candy into the total spreadsheet. My question is can I somehow type something or drag the formula down to populate the other cells in the total spreadsheet?
The idea I am thinking but which I don't know how to implement is to list all the items (as in column G) and list all of the relevant cells (e.g. B1 in the Candy spreadsheet) as in columns H and I (Note that all items will have the same cells but the cells will have different values...e.g. all three items have a cell B1 and B2 in their spreadsheet but these cells contain different values). I then try and fail to create a formula in cell B3 of the Total spreadsheet. I am trying to create a formula of the following nature:
='(Spreadsheet Name From Column G)'!(Cell Name From Columns H and I)
The Second half of the formula doesn't really concern me (i.e. the cell name from column H and I). However I am perplexed as to how to achieve the goal in the first parentheses above.
how to change the formula below which is referencing an internal worksheet, to a forumula that will reference an external worksheet that is located in an excel document on the G: Drive.
=SUMPRODUCT(--(1210laradj_v_2009!F2:F65536="HMO-ALT SELECT"),--(ISNUMBER(MATCH(1210laradj_v_2009!AO2:AO65536,{3,5,9,12,37,39,46,47,54,73,74,75,76,77,78},0))))
So what it's doing is totaling the counts in the 1210laradj worksheet that match columns HMO-ALT SELECT as well as the numbers 3,5,9 etc.
Well now these worksheets will be on a seperate excel spreadsheet located on a network drive, so I am trying to figure out how I can fix this.
I tried adding it in like so, but it fails.
=SUMPRODUCT(--('G:ROC-CLAIMSAudit ResultsProvider infomonthly statsReproc'd claims2011ProductionCounts[0111rpt2235_laradj_v.xls]0111laradj_v_2009'!F2:F65536="HMO-ALT SELECT"),--(ISNUMBER(MATCH(1210laradj_v_2009!AO2:AO65536,{3,5,9,12,37,39,46,47,54,73,74,75,76,77,78},0))))
I have a workbook, with 2 sheets. first page has graphs, second has data. in my charts I refer to a named range on the second one as follows: Data!Named_Range, where "Data" is the name of the second sheet. However when i save this, it changes the range of the chart to: '101044.xlsm'!Named_Range, where 101044 is the name of the workbook. This is a problem for me as this workbook will often be loaded into a document handling system where the file will change name, throwing out all sorts of errors because the chart path is invalid, and i have to change the range of all the charts manually. why does it have to use the file name when reffering inside the same workbook? and how do i force this to not change?
View 5 Replies View RelatedI'm designing a spreadsheet currently. I want to input a number into cell A1 - for example 13. Now the number 13 has a percentage value of 67.3%. When I enter the value into A1 I want excel to automatically fill cell A5 with the percentage value of 67.3%.
I need to have the numbers from 1-20 all with varying percentage values.
1 = 100%
2 = 97.8%
3 = 94.3% etc..
So essentially I would like to enter 13 into cell A1 and for cell A5 to automatically fill in the value of 67.3%, if I was to change the value in A1 to 10 it would also automatically change the percentage from 67.3% to 74.7%..
I am writing/creating macros and I want to create one that will automatically run when a cell value is changed to a certain entry.
View 2 Replies View RelatedI have noticed that the basic problem I have is a common one on this forum with different varibles for different people. I have attached a dummy copy of the spreadsheet that I am using.
I need to copy cell information for one spreadsheet to one of 2 other spreadsheets depending on a dropbox condition. The master spreadsheet is the Issues spreadsheet, and depending on whether the user chooses Transferred Complaints or Transferred Offences (in Column K) I need to transfer certain cells to the Complaints or Offences spreadsheets.
The information I need to transfer from Issues is: .....
I have a program that creates a query of data into two different spreadsheets.I wish to create a master page that automatically searches for data in each of two spreadsheets and add them appropriately to the master page.
I get how to do such thing using vlookup to search for data in one spreadsheet, how to do that in two spreadsheet situation.Here is a formula that I am stuck on...
=IF(ISERROR(VLOOKUP(A2,Sheet1!$A$2:$B$3,2,0)),VLOOKUP(A2,Sheet2!$A$2:$B$3,2,0),VLOOKUP(A2,sheet1:$A$2:$B$3,2,0))
I am trying to update 25 different spreadsheets, and have the latest row of data from each of the 25 automatically go to a 26th spreadsheet that is my summary.
My goal is anytime I add a new row of data in any of the 25, that the summary sheet gets updated automatically.
I m trying to get around here within the company I work for.
I'm interested to know how to set a specific range value e.g. "5 to 10" once a value is between those 2 numbers, and then if the value in the next row below is 34.12 it will be "30 to 35".
Here's an example code I constructed, but the darn thing just keeps on running
In my program I have data coming from an outside workbook. The amount of data coming into my program changes (Additional Rows) could be more or less. What I want is for the macro to recogize the change in data size and copy the new amount automatically. ie Change copy range. I would post the program but it is proprietary.
View 8 Replies View RelatedVBA code that would update a chart automatically as you change the inputs which are located in cells in excel. The inputs are located in cells B5:B9 and i want a code so that as you change these numbers the chart would automatically update.
View 1 Replies View RelatedI have worksheets named 1 to 100. In a different worksheet "Summary" I have a summary of data of those worksheets. I want to change the worksheet number automatically in a row by dragging.
For example, in worksheet "Summary" ....