Changing The Year
Jul 4, 2008
In my sheet I have a cell that has the year in 4 digits plus 5 other digits for incidents in our fire dept. (ie 2008#####) what I want is to have the year automatically change to 2009 on the first day of the new year.
View 9 Replies
ADVERTISEMENT
Jul 3, 2014
I need a macro where I can highlight a column and change all of the 2 digit years to a 4 digit year (actually, some of the 2 digit years are only 1 digit, e.g. "9" instead of "09").
I have an if then statement that I can use in the column after it, but I'd rather change the actual numbers in the original column, rather than adding another column (and having to keep the original, too).
The statement I had was:
=if(A1>=50,1900+A1,2000+A1)
I just copy dragged down to get the cell numbers for the rest of the column... but using A1 was just for an example, here, it's not necessarily going to be in that column. It needs to be just whichever cells I select.
It seems like it should be pretty simple, but I don't know how to word it in a macro.
Starting Column Example:
12
13
14
99
11
[Code] ......
For some reason I can't get rid of the borders...
View 6 Replies
View Related
Jan 2, 2012
I have been using the following to change the year in the Header
Code:
Sub Change_Format()
' Ctrl-y will change the year per individual sheet
ActiveSheet.PageSetup.RightHeader = Format(Now(), "YYYY")
End Sub
Is there a way to have this done automatically? There are absout 6 sheets in the workbook that have the year in the header and right now the code is in Module 3 and I have to press ctrl+y for every sheet.
View 4 Replies
View Related
Mar 10, 2007
I have VBA code that has the year for embedded within the code for eg "Fixed assets 2007.XLS"
I would to write VBA code that will enable me to change the date from say 2007 to 2008, wherever it appears in a partcular workbook.
View 9 Replies
View Related
May 7, 2008
I have a sheet where column A5 to Axx is filled with date from 01. jan to 31.dec. I.E.
A5= 01.01.2008
A6= 02.01.2008
A7=03.01.2008
etc
etc
Based on comparing the date the sheets collecects data from other sheets. It works fine, but I want the possibility to change the year by entering i.e 2007 in cell A1 and then the sheets change Cell A5 to 01.01.2007. I know i can use replace function manually, but when i want to simulate/compare betwen years it would be very nice to just enter the year and the sheet would collect new data.
View 10 Replies
View Related
Feb 22, 2007
I am trying to change the year of a date range I search from.
I have a selection of dates, I use sumproduct on a seperate page to calculate the number of entries between two dates entered in seperate cells
=SUMPRODUCT((HFRA!B4:B2000>=Summary!B1)*(HFRA!B4:B2000<=Summary!B2))
Cell B1 conatins the date 01/01/2007, and cell B2 contains the date 31/01/2007. I repeat this for every month of the year.
I want to be able to change the year of these dates in B1 and B2 from a seperate cell on another page.. so I can change the search ranges to 2008 without going into each cell and changing it manually.
View 9 Replies
View Related
Apr 15, 2014
I'm using this formula to count how many times the date in column C and the text "WON" appears in column I and it falls within the month & year that is in Z65.
=COUNTIFS(INDEX(C:C,$AL$15):INDEX(C:C,$AL$17),">="&DATE(YEAR(Z65),MONTH(Z65),1),INDEX(C:C,$AL$15):INDEX(C:C,$AL$17),"
View 2 Replies
View Related
Sep 25, 2006
I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then
MsgBox ("You may not enter Data before the current Month")
Else '...... Run main code here
View 3 Replies
View Related
Dec 8, 2013
Looking for a formula to compare current year values to previous year values. For example, if the current year has values for the month of January through March (100, 100 and 150), current year value will be 350 and the previous year value will be 975 (i.e. 300+275+400). The aim here is to make the previous year months summation equal to the present (or current) values. As new values are entered for the current year, the previous year's values will have to change to reflect the new month's value entered for the current year.
Month 2012 2013
Jan 300 100
Feb 275 100
Mar 400 150
April 650
May 454
June 800
July 500
Aug 375
Sep 525
Oct. 300
Nov 410
Dec 510
Sample file is attached : Comparison_Years.2011.xls‎
View 4 Replies
View Related
Mar 8, 2014
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
Attached is an example : Budget Example.xlsx‎
View 4 Replies
View Related
May 14, 2009
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
View 3 Replies
View Related
Dec 13, 2011
I am trying to do an IF statement, if the activecell's value is equal to this current year, do nothing and if its not the current year, to offset one column to the right and insert a blank column, then copy the whole column to the left and replace it with the new blank column.
View 1 Replies
View Related
Oct 13, 2008
i have the following table of information
Year DOB
7 01.09.96 -31.08.97
8 01.09.95 -31.08.96
9 01.09.94 -31.08.95
10 01.09.93 -31.08.94
11 01.09.92 -31.08.93
and a list of dates i need to look up the date to see which year it falls in and return the year
View 9 Replies
View Related
Feb 27, 2009
DATE function won't return TODAY()'s year in the "year" slot.
Is there a way convert, for example, 2/8/1963 to 2/8/2009 without using Concatenate?
View 9 Replies
View Related
Sep 29, 2006
I know that in order to draw a chart where a data line for a certain period is compared with the same period the previous year, one should have the 2 sets of data of different year side by side columnwise. However, is there a way where I could still churn out the same line chart when the data is all on a single column?
View 9 Replies
View Related
Oct 21, 2009
1. I need to convert a year into a decimal year ie. 1830 into decimal year (I don't have a month, just year)
2 Year/month into decimal year/month
I just not sure what to do, is the year stored as a number/text/date. What should it even look like? Does 1830 display as 1830.00 using excel.
View 9 Replies
View Related
Oct 22, 2007
I'd like to know a formula which can calculate the moving annual total, that is the sum of the last 4 quarters. Now every time the sales from a quarter is known, i have to recalculate the MAT mannually.
View 2 Replies
View Related
Dec 17, 2009
In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
View 2 Replies
View Related
Oct 15, 2007
I have a sheet in my workbook with at least 180 small tables, there may be more.
I woulds like to be able to change total formulas for all tables at once to show either year-to- date or total year.
For example:
If we have only progressed through the second period of the year, I would like to choose something to indicate period 2. At other time I may want to know the total year whether the periods are completed or not.
View 9 Replies
View Related
Sep 16, 2009
This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
View 2 Replies
View Related
Sep 9, 2007
Moving between different sheets changes the procedure window, which is a good thing, but can also can be error prone and annoying to search through several windows searching for the procedure or module currently working on. Is there a setting somewhere to prevent VBE from changing the current procedure window?
View 4 Replies
View Related
Aug 20, 2013
How to get only MONTH' YEAR if there is a DATE-MONTH-YEAR in a cell?
A1: 27-July-2012
Answer D1:JULY' 2012
Pl note "' " is suffixed after JULY (the month).
View 4 Replies
View Related
Apr 6, 2007
Is it possible to format cells to convert a date format of month/day/year to = year/week #/day of week? For example, 04/05/07 (April 5, 2007) would read as 7145, (7=last digit of year/ 14 = week number / 5 = day of week....Sunday being the first day of week)
View 9 Replies
View Related
Apr 15, 2008
I have 2 digit years (98, 99, 00, 01) that I need to convert to 4 digit years (1998, 1999, 2000, 2001). There is one year per cell. If it was simply a matter of adding 19 or 20 to the beginning of each, I could do that. But since there's a combination of both 19 and 20 that needs to be added and there all intermingled, I'm not sure how to do it.
Can a rule be written to add 19 to the beginning except if the current cell starts with a 0, then add 20? The highest year is 2008 (no 2010 to deal with).
Example:
98 --> 1998
99 --> 1999
00 --> 2000
01 --> 2001
View 9 Replies
View Related
Jul 28, 2009
Serial No Search E220060926320061125420060612520070824620061026720061226820061127920061226 Excel tables to the web >> Excel Jeanie HTML 4
E - Year Month Date
I need F column as Month Date Year Format
View 9 Replies
View Related
Jan 29, 2010
I'm after a formula this time ... i've searched the board and can't find what i need.
a cell shows 2009 December
and i'd like a formula to covert this to 31st December 2009 .... i.e. for any cell i'd like to know last day of month... and month and year ..
View 9 Replies
View Related
Jun 29, 2012
I have a query in excel sheet, i have an amount in a column and we want the calculate amt in next col like as...
We want add 5 % in amt in every year.
Amt
Year
Reqd Amt
10000
5
55000
[Code] .......
Example-1
1st Year
10000
B7
2nd Year
10500
B7+B7*5%
3rd Year
11000
B8+B7*5%
4th Year
11500
B9+B7*5%
5th Year
12000
B10+B7*5%
Total
55000
SUM(C7:C11)
Example-2
1st Year
15000
B14
[Code] .........
View 9 Replies
View Related
Aug 13, 2009
I have a copy of a year planner that calculates the days of the month and adjusts them according to the year input into the header area.
Would anyone please modify it so that the first column reads August and the last column reads July (instead of Jan to Dec) and still maintain the calculations as required?
View 14 Replies
View Related
Jan 8, 2014
Based on a certain customer agreement code in excel, "YES-N", then I need to add one year onto the date listed on the renew date column.
I need the result in cell 'AP'.
View 7 Replies
View Related
Jul 10, 2014
I'm trying to find a way so that when new data is available for 2015, I won't have the rewrite the code. Is there a way to do something like :
If rg.value= "abc"& Actual year Then
[Code].....
View 4 Replies
View Related