I need to classify a number into range
e.g.
D13 = 5101
if D13 range is 1 to 1000, write at D23 1000.
if D13 range is 1001 to 5000, write at D23 5000.
if D13 range is 5001 to 10000, write at D23 10000.
and so on until it reach 100,000
I am trying to write a code that will classify based on criteria and color a cell. The code is below and it runs, but does not give the desired results that are in column K of the attached spreadsheet.
[Code] ....
TestBook.xlsm‎
I would like to classify the chemical data into 16 groups based on their value. how to construct a formula to do the job?
My data look like this:
A B C D E F G
AsSbAgNiGroupcondition
0.10.50.080.6 14 1If As <0.1, Sb<0.1 , Ag<0.1 , Ni<0.1
2If As >=0.1, Sb<0.1 , Ag<0.1 , Ni<0.1
3If As <0.1, Sb>=0.1 , Ag<0.1 , Ni<0.1
4If As <0.1, Sb<0.1 , Ag>=0.1 , Ni<0.1
5If As <0.1, Sb<0.1 , Ag<0.1 , Ni>=0.1
6If As >=0.1, Sb>=0.1 , Ag<0.1 , Ni<0.1
[code]....
The Data that I have is Grades:
Gade 1/Class A
Grade 2/Class B
Grade 3
Etc..
I wanted to use if function, but I couldn't as there's a limit on the characters that can be used in "IF Function", but unfortunately, I can't because I exceeded the limit, as I have too many grades to include in "Logical_Test",
What I am looking for if one of this data was found write 45 Days, if other grades that is not listed was found write 30 Days.
I have been trying to work with to get my stock table classified into 3 different stock statuses and it comes out, it does not work I have attached the table as it is, the formulae I wanted to use and the end result I would like to have.
View 7 Replies View RelatedExcel 2007
ABCDE12145101843222121028543291410388563015104796731501058178325210
685894953107839104354108841011445510985111349661101215516710013135668
981417576999151858708916195971801720607291182161738219236274902024637
59121276476872228657786232425Sheet1
Designated Cell = 7
1 10 .034
15 25 .072
35 45 .089
Output Cell = ???
I am trying to find a formula for the output cell. Suppose the designated cell = 7 due to formulas above it. So that number is always given but can change. I then need a formula for the ouput cell that says if the designated cell is greater than or equal to 1, and less than 10, then the output cell should equal .034. So suppose the designated cell = 18.2. Then I would want the output cell to be .072 since it is greater than or equal to 15, and less than 25. The template I am using has 23 rows of numbers like above. I didn't know how to do it for 23 rows though. If/Then doesn't work because it is 23 statements long (well over the seven limit) and the vlookup only works when the cell is equal to a number and not a range.
I would like to count the number of occurence of a user given number in a range through VBA code. Have attached a sample with this.
View 2 Replies View RelatedI have a column of dates in Col H with associated values in Col I. I need to specify a date range in Cell I1 and I2 such that the row number for the first encounter of the first date is placed in Cell I3 and the last encounter of the end date is placed in Cell I4. For example, with this data when I specificy 4/2/13 and 4/3/13, I would like to get a 19 in Cell I3 and a 53 in Cell I4.
Matty supplied the formula in Col K for each of these cells. They worked well in the application that I supplied earlier (different locations for these variables), but my real application is as shown here, and these two formula give the incorrect results shown. Both of these formula are arrays.
Excel 2010HIJK14/2/201324/3/2013310=MATCH(I1,INT(H10:H5000),0)+1444=MATCH(2,1/(INT(H11:H5000)=I2),1)+1536789X10 114/1/13 1:366.97124/1/13 2:04134/1/13 2:04144/1/13 4:563.95154/1/13 4:573.27164/1/13 5:165.55174/1/13 5:172.35184/1/13 10:30194/2/13 14:00204/2/13 14:59214/2/13 15:01224/2/13 17:192.81234/2/13 17:191.59244/2/13 17:252.14254/2/13 17:262.05264/2/13 21:07274/2/13 21:07284/2/13 21:11294/2/13 21:11304/3/13 1:38314/3/13 1:38324/3/13 2:10334/3/13 2:10344/3/13 4:24354/3/13 5:152.84364/3/13 5:154.11374/3/13 5:173.45384/3/13 5:173.24394/3/13 9:35404/3/13 9:35414/3/13 9:59424/3/13 10:01434/3/13 13:36444/3/13 13:37454/3/13 13:41464/3/13 13:42474/3/13 17:124.03484/3/13 17:133.62494/3/13 17:15504/3/13 17:15514/3/13 21:12524/3/13 21:13534/3/13 22:214.41544/4/13 1:52554/4/13 1:52564/4/13 1:53574/4/13 1:53Ppk Raw Data (2)
I have a range of values in column A, I wish to add all numbers by all other numbers, i.e for a specific value in the range, I want to add it to all the other values in the range, and output the values in a new range.
For example for values 1,2,3,4 in range A2:A5, I want to output a new range the values;
1+2 =3
1+3 =4
1+4 =5
2+1 =3
2+3 =5
2+4 =6
e.t.c, beginning in range B2. No number can be added to itself.
attached sheet. Basically I want to say what a great job you all do here. I was wondering if anyone can help me. I need to write a formula that looks for example 11630,11635,11640,11647,11750 in column A and then adds all the value in column B that meet the first number requirement. So really if the column A meeting the first condition add the value next to it and then continue the rest of the numbers and add them all together.
I have tried using Sumif but I can only do up to 18 conditions in column A.
I know that MIN(A1:A5) will give me the smallest number from A1 to A5, but is there a way to get the 2nd lowest number in a range?
View 2 Replies View RelatedI need code that can organize the numbers in column A into consecutive rows.
Each group of numbers needs to be within range that defined in cell F1 (in these case 10 points).
But only the first the lowest the highest and the last number in the range need to be recorded.
Example below ....
I have search the site, but cant seem to find a way to load a var with the last row number in a range?
View 9 Replies View RelatedA1 cell: 9
A2 cell: 6
A3 cell: 2
A4 cell: 4
i want to know location number of min value in range[A1:A4].
the result: 3
I have a column of numbers ranging from -500 up to 50,000... How do I get it to only display numbers between 0 and 1000?
(I already have a formula attached to this column)
I have two sheets in Excel as below format. I would like to lookup (fill) “issue to” column of sheet2 in respect to sheet1. Please is there any funcations?
Sheet1
chqno Fr chqno toIssue to
1000110050Branch-1
1005110100Branch-2
1010110150Branch-3
1015110200Branch-4
Sheet2
Chq noIssue to
10002
10006
10155
10120
10008
10035
10151
Create a formula to find a number in a range. For instance, A1 is qty 1-100, any qty in this range,the cost charges is $10(B1).Whereas A2 is qty 101-200 and any qty in this range, cost charges is $8(B2).
C1 is the cell for me to enter the qty, if I enter 90, I want D1 to return as $10. If I enter 110, then D1 to return as $8.
[Code] ......
I seem to be having trouble with the syntax the number range after (iPopFreqMax).
i'm trying to set up a way to automatically add data labels to several series on a line chart with each series having data labels from a different row. i have managed to accomplish all of this except the last part. i can't find a way to reference different rows within a range.
let's say your code looked like this
Dim DataRange As Range
Set DataRange = Range("A1" , "Z50")
is there any way to reference a specific row from that?
[Code] .....
What I'm trying to do is expand the range from b1:d1 to something like b1:d100 but then when i get to "For Each SingleCell In FilmList" i can get it so that it's only doing referencing a specific row from that list that i can controlupdate with RowCounter .
With the inputbox I want to insert a numeric value to define a cell range, for example "C15:F15"
This is the code I'm using:
x = InputBox("Insert Row")
Range("C(x):F(x)").Select
Where (x) represents the Inputbox data (the number "15") I want to insert, But it doesn't runs
Is it possible for a macro to enter the number that is in Range("SYear") into A4, fill that number down 30 rows (31 total A4-A34), then add 1 to the number and put in the next 31 cells..repeat untill the number = Range("EYear"). For example if SYear = 2010 and EYear = 2012, I need 2010 in A4:A34, 2011 in A35:A65, & 2012 in A66:A96.
View 4 Replies View RelatedI receive a workbook from multiple vendors on a weekly basis. Part of the data in the workbook is their production schedule for each part. I need to pull the quantity out of the cell containing their production schedule, but the problem is each vendor enters thier data differently, (as seen in the attached sample workbook).
I know I could request that each vendor comply to a new format I could send out, in which date and quantity are in seperate columns, but this format has been in use for a long time, and most of them have automated the output, so I thought I'd try to fix it on my end first.
I want to search for contents of A1 in range of A1:B3 and if it is in the range return Y or N if not there.
View 9 Replies View RelatedI have data to find standard deviation from a1:a5
So use a formulae to do the same.
I want to increase range automatically when i put a number in a6 and so on.
I am a new to VBA. I want to add a range of numbers to another range of numbers. However second range should always add to itself with first corresponding array values. For example my firsr array is A1:F10 and second array is A15:F25. Now i want A15 = A15+A1, A16= A16+A2, A17= A17+A3 and so on. Every time second array should retain itself value and get added with first corresponding array values.
View 5 Replies View RelatedI want to compare the total % change I have to several markets. I have to do this for several months.
Problem is that the total % change can be + or - and the market change can also be + or -
Examples of what I'm looking for:
total % change is -20%, market change is -10% result it 10
total % change is -20%, market change is +10% result it 30
total % change is +20%, market change is -10% result it 10
total % change is +20%, market change is -10% result it 30
I tried to figure it out but I'm drawing a blank.
I cant figure out an averageif formula for a particular criteria. my criteria is any number between 10000 and 20000. Here is an example.
=AVERAGEIF(C:C,"between 10000 and 20000",G:G)
DateMachineLocationEventAmountStaffTimeComments1416041416042141604612326123211612321120410
1120512112035
Is there a way to enter a number in a cell that determines the range size of a sum formula? An example would be if A1 = 5. The formula in B1 =sum (C1:G1) etc
I have named ranges in my excel sheet.I wish to however find out the column number from each of the names and use it as a variable for later calculations.How do I do this?
