I want to compare the total % change I have to several markets. I have to do this for several months.
Problem is that the total % change can be + or - and the market change can also be + or -
Examples of what I'm looking for:
total % change is -20%, market change is -10% result it 10
total % change is -20%, market change is +10% result it 30
total % change is +20%, market change is -10% result it 10
total % change is +20%, market change is -10% result it 30
I receive spreadsheets which tell me where samples are located in 96 well plates. The plates' rows are lettered A-H, and the columns are numbered 1-12. So, for example, the first well is labeled A1, the 12th is A12, the 13th is B1, and the 96th is labeled H12.
When I receive the spreadsheets, there are cells that tell me which wells are occupied. For example a cell will contain "A2 - B7" or "D3-F12" (sometimes with the spaces before and after the "-", and sometimes not." I need a program that will tell me that "A2-B7" (or "A2 - B7") means there are 18 wells occupied.
I've tried a few things, but a lot of problems arise when I try to do anything with names like "A1" because excel already defines "A1" as cell A1. Do you guys have any ideas? Am I being clear?
I'm trying to count the number of numbers within a given range.
Example Row Y has cells that contain a series of numbers 1,5,9,12,23. No cell in the range should have the same individual number more than once. At the end of row Y I want to know how many numbers, not the total of the numbers are within that range.
Y 1 1,3,5 2 21,32,44 3 12,19,31 .. 40 2,4,18 41 total number of numbers in range Y1:Y40 - 12
I have understood we use row property or method to count number of rows in a range and when I write a code as below, I expected it would give output "4" because 4 rows are selected but instead it gives only "1" as output so I'm confused about the row property.
I have a very large range of text; g2:g23000. I am trying to find the number of times ABC shows up in this range and provide a count. The cells contain all bits of information, but i am only looking for ABC.
I have a function which copy pastes data into a sheet based on a filter criteria. It is also pasted in a specific layout(shown below) starting from Cell A1 in the top left corner. Therefore the destination sheet could have a different number of rows with values each time.
What I would like to do is count the sum of 'Values' in the destination sheet, and add a total below it.
For example, the [=TOTAL] cell is where I want the total to appear. Below the answer would be 26. But say if Peter wasnt in the record, the formula should still work in identifying the Total as 20.
Title: Sheridan Owner Petrov G
[Code]....
Is there a way I can achieve the desired result? I figured I had to somehow count from the first record by Peter, to the last one, whichever that may be.
create a function that counts only the number of rows in a range which contain less than 5 instances of the string "VAC". So if they have less than 5 cells in the row that contain "VAC" count + 1.
I'm trying to count the number of times a payment is made within a certain set of dates. I believe that I should be using a countifs function, but I'm not exactly sure how to program it. I have a number of months, say the last 12. And in each month a payment is made or it isn't made.
how to built a formula or a VBA code which would tell me how many times a range of a certain amount of consecutively stnading cells in a given row there is present, where each of the cells belonging to these five cells fulfills a certain criterion.
Example:
How many times does the range of 5 consecutive cells appear in range A1 to P2, where every cells belongng to these 5 consecutive cells would have a value graeater than 10.
For reference, I’ve attached a sample spreadsheet. I’m trying to find a way to calculate the max number of blank cells between a range of cells. As an example, in row two of my data, the result would be 3 using the range of F2:N2. Can this be done without the use of VB?
I have a column that is filled with different names. Some names appear more than once. There is one name in fact that appears four times.
I am looking for a formula, or VBA if that's necessary, that will look through the range Y2:Y50, and return a value of 4, because the person that has the most duplicates, her name appears 4 times.
If everyone's name appeared only once, except for a person whose name was in that range twice, then the formula would return a 2.
I want to count the number of times a word appears in a range (like M9:S663), but sorting it by the month it appears (eg: january = 2, february = 56, march = 2000, etc.)
I managed to do this but there has to be a better way
I want to count the number of cells in a range that have text in them (any text at all) but not count them if they have numbers in them or are blank. How would this formula be written?
I am having troubles finding a row number, using it to specify a range and then counting the cells containg values in that range.
This is what I have
Code: Private Sub TextBox1_Change() Dim test1 As String Dim FoundRom As Range Dim i as String Dim abc1 As Range Dim Core1 As String
test1 = TextBox1.Value
[Code] ........
I am thinking that I have my "Dim"'s wrong or something but I cant figure out how to define the range including the found row number and then count the number of cells containing data within that range...
I am trying to count the number of specific words contained in a specific cell. If my data were static, and the list of keywords was short, there are many solutions such as using multiple instances of the length function as proposed by @shg here.
Suppose I have the following sheet: (column C is what I am trying to achieve)
A B C 1
[Code]....
That is, C2 will tell that B2 contained 3 of the keywords (1X beautiful, 2X happy) and so on.
I have a range of 30 cells in a row. From that row there are groups of cells that have data that might be 1-7 cells populated in a row and in between these groups are blank cells in the row. I need to see what is the highest number of cells in a continuous row that contain data, what the mode is for continuous cell counts, and what is the average value for the data from the continuous cells. The average is a nice to have but not entirely necessary as most cell data will be fairly similar and I can get a close enough average just by knowing the average number of cells that contain data in a row. I have to do this calculation for about 1000 rows of individual data so its important a formula fit in one row.
Almost need a count function to count starting with each cell and then stopping at the first no no value it finds. Then it would show those counts and I could run a formula to pick the highest count and also show the mode of counts.
I will let the experts at it!, my weak mind could not think this one through. I thought something to do with MATCH for a while but no go from what I could do.
I have a large spreadsheet which holds lots of data with date ranges that i need to performs different actions to. Any way to identify the number of days, per calender month, that falls in a date range.
sample data...
Start Date End Date Old Value New Value
08/03/2010 18/06/2010 16758.2 16758.1
[Code] .......
I need to break down the total number of days per month
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
24 30 31 18
[Code] ......
As you can see this also laps into a new year, which poses my next problem, ill probably just add more columns on to the end of the table for that though...
I will later apply different calculations to these cells but in short need to get a calculation for the number of days per month first.
(in short spreading the new value out accross the year then multiplying it by the days... i also need to apply a further daily volume cal to it).
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
I have data in a column (G) consisting of zero and ones. I would like to count the number of clusters of the number 1 in the data. For example in the data below there are 8 ones. But instead, I need to calculate how many groups of 1s occur. So in the case below the group of 1s = 3.
In terms of what defines a group. Whenever there is a zero either before or after the occurance of a 1 constitues a group, i.e the groups are broken out by zeros.
