Number Range Syntax In VBA?

May 4, 2014

[Code] ......

I seem to be having trouble with the syntax the number range after (iPopFreqMax).

View 1 Replies


ADVERTISEMENT

If Else Syntax: Change Some Outputs Of The Macro Without Changing The Syntax

Jul 19, 2006

I´m writting a macro. It works find until a certain point. When I want to change some outputs of the macro without changing the syntax, it display an error mesage while runing the macro. It says Else without If. Which is quite disturbing because the Else was not creating any problem before. Here is my macro before I changed the conditions (this one work nicely)

Sub Copy_Sheet_Beta()
Set wba = ActiveWorkbook
On Error Resume Next
If IsWorkbookOpened("Projekt.xls", "C:Documents and SettingsfrederikSkrivebordRedd Barna") Then
Workbooks("Projekt.xls").Activate 'In case open, just activate "Projekt"
Else
Workbooks.Open Filename:="C:Documents and SettingsfrederikSkrivebordRedd Barnaprojekt.xls"
End If
Set wb = Workbooks("Projekt.xls")
wb.Activate
If Not SheetExists(wba.ActiveSheet. Range("C1").Value) Then
MsgBox "overall doesn't exist!"
Else........................................

View 2 Replies View Related

Tweak Of Syntax On Named Range

Nov 17, 2008

just need a hand tweaking the syntax on a names range.

Range 1

=INDEX(Sheet2!$C:$C,5):INDEX(Sheet2!$C:$C,ROW(LRow)-1)
LRow: Is a named active row for the last row. [say row 10]

This named range only selects ONE Column

How can I get it to select TWO columns [ie C & D] as in the example below does. It does it by the last number 2, goes two columns wide?

Range 2

=OFFSET(Sheet2!$C$5,0,0,COUNTA(Sheet2!$C:$C),2)
I can't figure out how to express that in the Range 1?

View 9 Replies View Related

Syntax Must Be Incorrect For Range Reference

Feb 13, 2010

The following sub to create and name wsheets results naming the new sheet with the value of "A9" only, but what I want to name the new sheet is "A9" + "B9".
Sub CreateWorksheets()
Dim newSheet As Worksheet, itemSheet As Worksheet
Dim cell As Object
Dim itemrange As String

Set itemSheet = Sheets("BIDFORM")

Application.ScreenUpdating = False
itemrange = "A9:B9:" & itemSheet.Range("A9").End(xlDown).Address
For Each cell In itemSheet.Range(itemrange)
If SheetExists(cell.Value) = False Then
Sheets.Add Before:=Sheets("BACK SHEET"), _
Type:="C:PathFile"
Set newSheet = ActiveShee
newSheet.Name = cell.Value
End If
Next cell
Application.ScreenUpdating = True
End Sub

View 9 Replies View Related

Numerical Syntax For Range Object

Feb 27, 2008

is it possible to write Range("A1:H6") without the string inside the range brackets? i'm trying to do is pass numerical column values into the Range function, and i'd rather not make a mess using the CHR function (CHR(65) = "A", for example).

View 2 Replies View Related

Advanced Filter Syntax For Copy To Range

Oct 16, 2013

I thought I had this cracked last month when I ran a set of reports using some code dependent on using advanced filters to first create a unique list to loop through and then to create a list of all entries in a list for each unique entry. The idea being that I extracted all the data for each unique entry in the list and saved that to a new workbook, named after the unique entry.

However, this month I'm totally flummoxed again. I can't seem to get even the first part, creating a unique list, to run.

I have a sheet with several thousand rows of data with maybe 25 columns. I have the following code to try to extract the unique entries in the 2nd column, column B and store them in the same worksheet in column AD, to use when looping through the list.

VB:
With ActiveSheet
.Range("AD1").EntireColumn.Delete
.Range("A1").CurrentRegion.Columns(2).AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Sheet1.Range( _

[Code].....

View 9 Replies View Related

Syntax Range - Getting Runtime Error 1004

Feb 15, 2013

I know you can use the syntax range(cells(x,y),cells(z,w)) but for some reason unknown to be the following isn't working:

Set CurrSuppRange = TT.Range(Cells(1, CurrSuppCol), Cells(LastRow, CurrSuppCol))
where
CurrSuppCol = cboxCurrSupp.ListIndex
OurSuppCol = cboxOurSupp.ListIndex
LastRow = Workbooks(lbWkBkName.Caption).Worksheets(cboxWorksheet.Value).Cells(Rows.Count, "A").End(xlUp).Row
(each return integer values)
Set TT = Workbooks(lbWkBkName.Caption).Worksheets(cboxWorksheet.Value)

(tested and works fine)

View 2 Replies View Related

Indirect Formula Syntax For Referring To A Range On Two Worksheets

Jul 5, 2012

B1=Name of WorkSheet
B2=Name of 2nd Worksheet

I am trying to write a sum formula using Indirect so that the end-user can enter the names of the sheets in B1 & B2 (the values are always in cell F5 on each sheet). I thought this would work but it is throwing a REF# error.

=SUM(INDIRECT("'"&B1&":"&B2&"'!F5"))

with some added spaces for clarity:

=SUM(INDIRECT(" ' " & B1 & " : " & B2 & " ' ! F5"))

View 9 Replies View Related

Paste Values To Next Empty Row In Range On Another Sheet Syntax

Jun 27, 2014

I have the following code to transfer data to another sheet, but there are 2 issues with it:

1. I want to just paste the values, but every code I have tried has had object or syntax errors that can't seem to be fixed

2. If I run the macro a second time, it overwrites what was pasted the last time the macro ran. My code looks like it should look for the next empty row in the range, but it doesn't seem to do that.

What is the correct syntax to do the above. Here is the code:

Sub Update()

Dim c As Object
Dim rngA As Range
Dim cc As Object
Dim rngAA As Object

'Check every cell in the range for matching criteria.
For Each c In Sheets("OpenGen").Range("F9:F208")

[Code] ..........

View 2 Replies View Related

Loop Syntax: Method Range Global Error

Aug 31, 2007

This line fails, is Method Range Global error.... What is wrong w/ this, and how should it read?

If Range("D", i).Value = "Need Parent" Then
2nd Question- The following line is my normal method in doing a simple For Next Loop. What is the difference between using this one, looping through the cells and the first one referring to a Range for the loop?

If Cells(i, "D").Value = "Need Parent" Then

View 9 Replies View Related

Basic Range Copy, Match Sheetnames: Logic, Style, And Syntax

Feb 11, 2009

I am wondering if using an "if" statement or a case statement would be good ways to check two worksheets in two different workbooks to see if their names match? I could use some help correcting my syntax too:


For 1 to ws.count
If Worksheet("one").Name = Worksheet("two").Name
Worksheet("one").Range("A1:G84").Copy
Worksheet("two").Range("A1:G84").Paste
Endif
Next ws.Count

View 9 Replies View Related

Correct Syntax For Function To Find Average Based On Background Color Of Cells In Range

May 20, 2014

I'm working on a workbook that will track staffing patterns.

The workbook has three worksheets: Sheet1 "RCS", Sheet2 "HCT' and Sheet3 "Hidden". I've attached the workbook to this thread. The password for the form is "j".

On Sheet3 "Hidden" I have two tables that are set up to collect the SUM of columns on Sheets1 "RCS" and Sheet2 "HCT". I'm finding the SUM of each range by way of the background color. I've set up the following formulas and when the "data collection tables" are in the same worksheets as the original information, the formula's work perfectly:

The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"

[Code] ........

The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"

[Code] .......

I have two more functions that aren't working due to the fact that the source values are percentages and NOT plain numbers. The above functions work great for SUM but not for percentages. EXAMPLE--Let's say, 3 sub percentages it gives me the SUM of the 3 percentages (i.e. 85% + 100% + 100% = 285% instead of giving me 95%.

[Code] ........

How might I use the following functions to find the average of the source fields instead of the SUM?

View 7 Replies View Related

Excel 2007 :: Macro For Finding Out Missing Number And Duplicate Number In A Range

Jan 22, 2013

Excel 2007
ABCDE12145101843222121028543291410388563015104796731501058178325210
685894953107839104354108841011445510985111349661101215516710013135668
981417576999151858708916195971801720607291182161738219236274902024637
59121276476872228657786232425Sheet1

View 7 Replies View Related

Formula Finding Number In Range To Display Another Number

Aug 25, 2006

Designated Cell = 7

1 10 .034
15 25 .072
35 45 .089

Output Cell = ???

I am trying to find a formula for the output cell. Suppose the designated cell = 7 due to formulas above it. So that number is always given but can change. I then need a formula for the ouput cell that says if the designated cell is greater than or equal to 1, and less than 10, then the output cell should equal .034. So suppose the designated cell = 18.2. Then I would want the output cell to be .072 since it is greater than or equal to 15, and less than 25. The template I am using has 23 rows of numbers like above. I didn't know how to do it for 23 rows though. If/Then doesn't work because it is 23 statements long (well over the seven limit) and the vlookup only works when the cell is equal to a number and not a range.

View 9 Replies View Related

Count The Number Of Occurrences Of A Number In A Range

May 5, 2007

I would like to count the number of occurence of a user given number in a range through VBA code. Have attached a sample with this.

View 2 Replies View Related

IF/Then/Else Syntax

Nov 25, 2008

Im having problem with If/Then/Else Statements Not sure what the problem is. I have a text box a user inputs whatever in to create two new tabs one is the tab name then the next is tab completed. It isnt liking my syntax I have here.

View 7 Replies View Related

Excel 2010 :: Row Number Range From Date Range?

Aug 5, 2013

I have a column of dates in Col H with associated values in Col I. I need to specify a date range in Cell I1 and I2 such that the row number for the first encounter of the first date is placed in Cell I3 and the last encounter of the end date is placed in Cell I4. For example, with this data when I specificy 4/2/13 and 4/3/13, I would like to get a 19 in Cell I3 and a 53 in Cell I4.

Matty supplied the formula in Col K for each of these cells. They worked well in the application that I supplied earlier (different locations for these variables), but my real application is as shown here, and these two formula give the incorrect results shown. Both of these formula are arrays.

Excel 2010HIJK14/2/201324/3/2013310=MATCH(I1,INT(H10:H5000),0)+1444=MATCH(2,1/(INT(H11:H5000)=I2),1)+1536789X10 114/1/13 1:366.97124/1/13 2:04134/1/13 2:04144/1/13 4:563.95154/1/13 4:573.27164/1/13 5:165.55174/1/13 5:172.35184/1/13 10:30194/2/13 14:00204/2/13 14:59214/2/13 15:01224/2/13 17:192.81234/2/13 17:191.59244/2/13 17:252.14254/2/13 17:262.05264/2/13 21:07274/2/13 21:07284/2/13 21:11294/2/13 21:11304/3/13 1:38314/3/13 1:38324/3/13 2:10334/3/13 2:10344/3/13 4:24354/3/13 5:152.84364/3/13 5:154.11374/3/13 5:173.45384/3/13 5:173.24394/3/13 9:35404/3/13 9:35414/3/13 9:59424/3/13 10:01434/3/13 13:36444/3/13 13:37454/3/13 13:41464/3/13 13:42474/3/13 17:124.03484/3/13 17:133.62494/3/13 17:15504/3/13 17:15514/3/13 21:12524/3/13 21:13534/3/13 22:214.41544/4/13 1:52554/4/13 1:52564/4/13 1:53574/4/13 1:53Ppk Raw Data (2)

View 2 Replies View Related

Creating New Tab Syntax

Nov 25, 2008

if I copy and Add it created a new workbook not the current on im in. What am I doing wrong?

View 5 Replies View Related

Getting A Syntax Error

Jan 28, 2009

Getting a syntax error which and I'm not sure what I've done wrong. This is the bit thats causing the problem:

View 2 Replies View Related

Looking For Correct Syntax

Feb 10, 2009

trying to write a formula in a VB to some cells:

View 3 Replies View Related

Syntax Error

Aug 27, 2009

what is wrong with this syntax:

View 2 Replies View Related

Module Syntax

Dec 1, 2009

I would like to have an email generated when a cell changes to a particular value. I've developed the macro to send the email with a saved attachment.

When I try to OJT-Engineer the text for the module, I can't get it to recognize the macro. It's a syntax issue, it seems.

What I need is for my module to initiate a macro when a cell changes to a value.

This is the code EXACTLY as it appears:

View 9 Replies View Related

Syntax For SendKeys

Jan 10, 2010

A theoretical question following an empiric result.
For the command “SendKeys”, for instance, take these two lines:

View 14 Replies View Related

Syntax Of This Formula

Sep 17, 2008

What is wrong with the syntax of this formula?:

COLUMNS(INDIRECT("AverageDemand!$A7:"&A$7))+4

I'm getting #REF errors and I can't work out why...

View 9 Replies View Related

VBA With If Statement Syntax

Jan 21, 2009

I have the following code that loops thru and puts the word 'TEST' in column J if column B has a TEXT value of '020'

----------------------------------------------------------------------------------
With Range("J1:J" & Lastrow)
.Clear
Range(.Cells(2), .Cells(.Count)).Formula = "=if((b2)=""020"",""TEST"","""")"
End With
----------------------------------------------------------------------------------

Questions
1) why do I need double quotes "" "" on every argument in the function? Is it because I'm working with TEXT data?
2)I want to use multiple ifs (ie if cell b2 equals '020' OR '030' then put the word 'TEST' in col J). How to change the syntax to do this?

View 9 Replies View Related

Combo Box Vba Syntax

Nov 18, 2009

I know this syntax isn't right.

I have a form and a combo box that I want ot fill the items in from cell F22.

Here is my
Sheets(PowerAnalysis.xls).Cells("F22").Value = ComboBox2.Text
What is the best way to get this done? I have searched here and on the web and I can't seem to find any straightforward answers.

View 9 Replies View Related

VBA Autofilter Syntax

Apr 23, 2006

I am trying to get the below autofilter working but to no avail, its just putting the text datStart and datEnd in the auto filter, not what I receive in the boxes, see bold line for line in question

Dim datStart, datEnd As Date
Dim strAgent As String
datStart = txtStart.Value
datEnd = txtEnd.Value
strAgent = txtAgent.Text
Range("A4").Select
Selection.AutoFilter
Selection.AutoFilter Field:=4, Criteria1:=">datStart", Operator:=xlAnd, _
Criteria2:="<datEnd"

View 2 Replies View Related

Autofilter Syntax

Dec 19, 2006

I thought I saw a thread where someone used AutoFilter as a one liner like

Range("VFILTER").AutoFilter 23, "True"

but for some reason this does not work. The filter is active, but it doesn't pay attention to the field or criteria part.

View 5 Replies View Related

Vba Sql Syntax 2003

May 23, 2007

In VBA Excel 2000 while ODBC connecting to a dbase file:

parameter=" N0011"
...
ActiveSheet.QueryTables.CommandText = Array( _ ...
"SELECT ... & Chr(13) & "" & Chr(10) & _
"FROM ... & Chr(13) & "" & Chr(10) & _
"WHERE (dbase_file.field1=" & chr(34) + parameter + chr(34) & "... & Chr(13) & "" & Chr(10) & _
"ORDER BY ...")
...

It doesn't work any more in Excel 2003. Of course it works directly such as:
"WHERE (dbase_file.field1=' N0011')
but I couldn't find the way to replace the ' N0011' with the parameter.

It is not the singular issue...
"FROM dbase.file dbase.file " that worked well in Excel 2000, the Excel 2003 "wants":
"FROM 'drivepath'dbase_file dbase_file "
and I couldn' find a way to replace the explicit 'drivepath' with a predefined variable.

View 3 Replies View Related

Syntax Of Loops

Feb 2, 2008

I am trying to figure out what a past employee's macros do and how they do it. I would simply like to know what the followin syntax enables you to do:

While ActiveCell <> ""
...
...
Wend

or

While ActiveCell. Offset(5) <> ""
...
...
Wend

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved