Clearing Of The Cells Clears As Well The Copying Of "B30"
Oct 14, 2008
Sub test()
Range("B30").Copy
Range("A30:B30").ClearContents
End Sub
Problem: the clearing of the cells clears as well the copying of "B30"
Sub test()
Range("B30").Copy
Range("A30:B30").ClearContents
End Sub
Problem: the clearing of the cells clears as well the copying of "B30"
I have 4 combo boxes with selectable options and several cells for inputting data into. I'm looking to create a reset button that returns combo box values back to the first one in the list and clears all cells at the same time. I've figured out the cell reset as follows;
View 3 Replies View RelatedI have a spreadsheet that has I have protected. On this sheet I have a button labeled Reset Form. When you click the button it it goes to each Unprotected Cell and deltes the contents. I created this by starting the macro and then tabbing to each and every cell and deleteing the contents I then ended the macro...
Is there a code that I can use for to clear all unprotected cells as opposed to creating the macro manually?
My computer runs on Excel 2003 but my Laptop is on Excel 2000, the problem is I have the below code on a spreadsheet I wrote on my Computer which runs fine but when I open it on my Laptop it comes up with a run time error it doesn’t like the clear contents line. If some one could explain to me why it is happening and how to get round the problem so it will work in Excel 2003 and 2000.
Private Sub Workbook_Open()
Application. ScreenUpdating = False
Sheets("data").Visible = xlVeryHidden
Sheets("Incidents").Visible = xlVeryHidden
Sheets("Front Sheet").Select
Range("A17:S17").Select
Selection.ClearContents
Open1.Show
Range("A17").Select
Application.ScreenUpdating = True
End Sub
I am trying to clear the contents of cells in a very large spread sheet containing certain words. I am running the following macro and it will only do the first part, so it will clear cells containing "deceased" but stops at "esa". There may be any number of other words or text in the cell and I want it to delete cells with "esa" by itself so for ex. not delete cell containing "vanesa". I am very amateur so I am sure this is something simple but I cannot find the answer or figure it out for myself.
Sub DeleteAll()
Dim lCount As Long
Dim rFoundCell As Range
Dim rLookRange As Range
Set rFoundCell = Range("A1")
Set rLookRange = ActiveSheet.UsedRange
For lCount = 1 To WorksheetFunction. CountIf(rLookRange, "*deceased")
Set rFoundCell = rLookRange.Find(What:="deceased", After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
rFoundCell.ClearContents.......................
I have cells, or columns hidden when I do not need them, but I have to a data entered in those cells to make my spread sheet work. Usually just 0.
When I do the all clear or " clear all contents" operation at the end of the day, it clears the hidden data/cells too. Is there anything I can do to stop excel from clearing those hidden cells?
I have a macro where somone fills in a form and then it copies the data in the form to a database (another worksheet). Once the macro is run and has copied the form to the database, I then clear each cell seperately using the below code :-
View 5 Replies View RelatedI have compiled the following code with bits from here there and everywhere to clear the user entered details on a form. My problem is that I need to retain or reset to "Please Select" the cells with drop down lists.
In list form, I am trying to;
Unprotect the worksheet,
Select the cells with drop down lists and lock them,
Delete the contents of unlocked cells,
Selecting and unlocking the cells with the drop down lists ready for re-use,
Re-protect the worksheet.
(I probably should mention that my "Form" is just a formatted worksheet that looks like a form on the screen and when printed, not any sort of inbuilt Excel function that I have read about somewhere, probably here)
Code:
Sub ClearUnlockedCells()
'
' Clearform Macro
' Clear entered data from Form.
'
Dim WorkRange As Range
Dim DVRange As Range
[code].....
I've created (with the help of jmthompson from here) a macro to pull an entire row of data and copy to another sheet (Sheet1) if column U has "YES" in the cell.
Now I need to clear the contents of cells in range B-U after the copy has occurred.
Here's the current macro: ...
I created a macro to clear cells but I can't get it to clear a number of ranges. It will only clear single ranges.
Sub DeleteStuff()
Dim c As Range
For Each c In Range("G6:G10", "H6:H10", "J6:J10")
If c "" Then c.ClearContents
Next c
End Sub
I have a workbook with a series of sheets that have tables for entering data. The table row and column labels and formulas in certain cells of each sheet are locked and some sheets are hidden.
When opening the file I want to clear all cell contents (interior color, comments, data, etc) in all the unlocked cells on each sheet that is not hidden.
I tried protecting the sheets first so only the unlocked cells would be accessible, but when I run the code below I get an error saying that the clear contents etc. cannot be performed because the sheet is protected. If it is not protected, everything gets wiped out.
How can I keep the locked stuff but clear the unlocked cells?
For Each ws In ThisWorkbook.Worksheets
If ws.Visible = xlSheetVisible Then
ws.Protect Password:="aaa" 'Protect each sheet
ws.Cells.ClearContents 'clear content of any unprotected cells
ws.Cells.ClearComments 'clear any cell comments
ws.Cells.Interior.ColorIndex = 0 'set background colour to no fill
Active.Cells.Range ("a1") 'make the active cell the top left
End If
Next ws
I have a target range for a worksheet change. Then when finished I highlight the data and press 'delete' I get an error within the code.
View 2 Replies View RelatedI have a pivot table with various filters, and I would like to setup a macro assigned to a button which resets the filters to 'All'. Used this code to clear one field and it worked successfully:
Code:
Option Explicit
Sub ClearFilters()
'
' Clear Filters
ActiveSheet.PivotTables("FLIGHTS") _
.PivotFields("MONTH").ClearManualFilter
End Sub
The question that I have is: how can I list the other fields in the same macro, or is there a command that just resets all available field so they don't have to be listed individually?
I have written a spreadsheet for scheduling employee shifts.
My problem is that I have written some calculations in on the Worksheet_Change subroutine.
What happens is when I want to copy a selection and paste it multiple times, it clears my active selection's "Copied" status whenever I paste.
I'm not sure if I'm explaining it clearly, but if I copy a selection (it turns the typical selected colors with the dashed border), go to the first destination, and paste, the spreadsheet then refreshes the total hours columns, which clears the "copied" status of the original range.
I was thinking of checking the clipboard contents to see if it contains an excel range, and putting it back in the clipboard after the spreadsheet updates.
I'd like to know how to check the clipboard contents, or if anyone else can think of a different way to circumvent this,
The below code clears a sheete starting at row 7 and leaves the last row. I want to validation that if the only row with text is the starting row then I dont want the delete rows to happen
Sub clearRecap()
Sheets("Recap").Select
Range("a7", Range("a" & Rows.Count).End(xlUp).Offset(-1)).EntireRow.Delete
End Sub
I created some excel 2003 spreadsheets to use for Fire/Police dispatchers. I have a series of yes/no option buttons that were created using the control toolbox. I have a macro that clears all the blanks where text is added, but want to add a line that clears the option buttons also.
View 14 Replies View RelatedI am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-
View 12 Replies View RelatedCode to run a macro called "PriceForm" instead of clearing the cells.
Private Sub Worksheet_Calculate()
Static MyMarket As Variant
Application.EnableEvents = False
Application.Calculation = xlCalculationManual
If [A1].Value = MyMarket Then
GoTo Xit
Else
MyMarket = [A1].Value
Range("T5:X50").Value = ""
End If
Xit:
Application.EnableEvents = True
Application.Calculation = xlCalculationAutomatic
End Sub
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I am running into trouble with too much data accumulating on the clipboard in XL2007, so is there any way to set cutcopymode=false (or some other function) so that the clipboard is automatically cleared after every paste event throuout a macro project without having to restate cutcopymode=false after every paste?
View 7 Replies View RelatedI have a spreadsheet with values and text in Column G. I would like VBA code that will clear only clear the text in column G drom row 9 onwards.
View 9 Replies View RelatedI have a UserForm called Menu. The first line of code behind the OK button says
Menu.Hide
When I run this using F8, it behaves itself and the menu disappears after the code line Menu.Hide. When I click the OK button to run it normally the menu stays on the screen partially hidden behind the next sub menu.
I have 4 listboxs on a Userform populated by rowsource
I have code that will not allow conflicting selections of the list boxs
EG listbox1 conflicts with listbox3
listbox2 conflicts with listbox4
What I am trying to do is when the user clicks on listbox1 and listbox3
I clear the selections from 1 and 3 leaving no highlted blue in the boxs
My code runs it clears the first listbox and not the second
I have tried using boolean to clear them but it is the same thing
here is my code below
If shOptions.Cells(r, c) = "" Then
MsgBox "You have selected conflicting Alterations"
UserForm1.Controls(h.Name).ListIndex = -1 *this works
UserForm1.Controls(lb.Name).ListIndex = -1 * this does not fire
Exit Sub
End If
If I change the code to
UserForm1.Controls(lb.Name).ListIndex = -1 * this works
UserForm1.Controls(h.Name).ListIndex = -1 *this does not
I am inputting strings into an array and want to clear (i.e remove the contents of all the array) after i have finished witht the array.
I wish to create a macro that clears data and uncheck all checkboxes (forms). I have attached my excel file.
View 2 Replies View Relatedi have a button and code so that when i click the button it prints, saves and creates a new worksheet ie job 2 ready for data entry,
somewhere in that process i would like it to copy the contents of certain cells from sheet job 1 to sheet job list,
I have a worksheet with columns as follows:
col A Name
col B Category
Col C Subcategory
In column A every row has a name, but in col b and c only the first row of a category or sub are popluated, for example:
Name CAT Sub
a 1 1
b
c 2 2
d 3
e
f 3 4
g
h
As I work with many of these spreadsheets, they are all different in respect to number of products(name) and number of CAT and SUBCAT.
I have a list of names in column a, and in column b either a "0" or a "1"
as part of a longer piece of code I need to be able to copy the names that have a "1" next to them over to column c
I need help with copying some data from one sheet to the other, but I am really bad at explaining this. Can I send the excel sheet to someone and then explain it? I think that will be easier, cuz Ive tried explaining it on another forum and nobody understood what i was saying without being able to see the sheet.
View 9 Replies View RelatedI'm looking to clear the contents of the 2 rows after my previously defined last row. So for example, if my last row is defined as LastRow1, I'd like to clear the contents of thr 2 rows below LastRow1.
View 2 Replies View Related