i am trying to use a combo box to change the properties of a text box. i think i can do this by having it look at the cell link that i sent and then changing the text box appropriately with something like this:
View 3 Replies
I have a combo box named Combobox5 and a text box named Textbox7.
Should this code go in the Userform Initliaze or where? I have tried placing it in both the ComboBox5 Change evnent and no luck so far.
Range("G22:J28").Value = TextBox7.Text
Again this code is dependant upon the user making a choice from ComboBox 5.
I have also tried:
Range("G22:J28").Value = TextBox7.Value
I am using Excel 2003. Any ideas??
I am trying to use VBA to change the caption of checkboxes in "Sheet 2" when I change the value of a cell "A1" in "Sheet 1".
This code is working:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
Worksheets("Sheet 2").CheckBox1.Caption = "New Caption"End Sub
But there are 6 checkboxes in Sheet 2 and I would like to do something like this:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
For i = 0 to 5Worksheets("Sheet 2").Control("CheckBox" & i+1).Caption = "Box" & i+1Next iEnd Sub
This doesn't work.. So I guess the Control-function is wrong.
I am having a hard time setting the MultiLine, Scrollbars and WordWrap properties through programmation. Actually what I want my code to do is to create a set of textboxes in my spreadsheet and then set the MultiLine, Scrollbars and WordWrap properties. Right now I can create the boxes and rename them but I'm unable to change the other properties.
inst_num = Range("AA1").Value
ActiveSheet. OLEObjects.Add("Forms.TextBox.1", Link:=False, _
DisplayAsIcon:=False, Left:=20, Top:=95 + (inst_num - 1) * 105, Width:=70, Height _
:=30).Select
ActiveSheet.OLEObjects.Add(ClassType:="Forms.TextBox.1", Link:=False, _
DisplayAsIcon:=False, Left:=100, Top:=95 + (inst_num - 1) * 105, Width:=100, Height _
:=30).Select.............
How do I set the font size property and special effect property in this code?
I was trying to answer a question on Experrt Exchange but Rory beat me to it and now I'm feeling frustrated that I can't get my solution to work.
Sub AddCombo()Dim rVals As Range, rCell As Range, lTop, lLef, lHeight, lWidth, lCount As LongSet rVals = ActiveSheet.Cells.SpecialCells(xlCellTypeAllValidation)lCount = 1For Each rCell In rVals If rCell.Validation.Type = 3 Then lTop = rCell.Top lLeft = rCell.Left lHeight = rCell.Rows.Height lWidth = rCell.Columns.Width With ActiveSheet.OLEObjects.Add(classtype:="Forms.ComboBox.1", Left:=lLeft, Top:=lTop, Width:=lWidth, Height:=lHeight) .Name = "NewCombo" & lCount .ListFillRange = rCell.Validation.Formula1 .LinkedCell = rCell.Address(0, 0) '.SpecialEffect = fmSpecialEffectFlat //doesn't work // '.FontSize = 14 //doesn't work // '.Font.Size = 14 // doesn't work // End With lCount = lCount + 1 End IfNext rCellEnd Sub
I have a button wich will add data entered on a form to a spreadsheet if the data meets certain criteria. If it does not it will not let you add anything. I would like to add a second button that will add the data even if it does not meet the criteria but I need the second button to only be enabled with a password. Maybe a macro to change the button properties from locked to unlocked (true to false).
View 2 Replies View RelatedIt has been awhile since I've worked on anything and I can't remember how to do something that is probably very simple. I have placed an option button on my worksheet and cannot for the life of me remember how to change the properties. When I right click and select properties a box pops up but there is no info there. I want to be able to change the name and group etc.
View 3 Replies View RelatedI have a question regarding the properties of an Excel file (.xls 2003). I can change them all (as indicated on Microsoft support website) expect the name of the last person who recorded the document (File ==> Properties==>Stat.)
How to change the name?
I need some code that will loop through all the images on a spreadsheet, and change the properties so the images will "Move and Size with Cells"
View 2 Replies View RelatedThe macro im using copys a table from excel into a email. Unfortunatly the email is not readable for blackberry users due to the table properties.
I need to change a few properies. This is what i do manually.....
In outlook i then hover over the table right click then select "Distribute rows evenly" then i right click again but this time i select "Table properties" i then go to the "Row" Tab
i then untick the "allow row to break across pages"
then tick "specify height" and change the value to 0.4 cm and finally change "row height is" to "exactly"
Below is the whole code im using so far....
Code:
Sub Mail_Selection_Range_Outlook_Body()
Dim rng As Range
Dim OutApp As Object
[Code]...
I would like to set up some option buttons so that the will be become visible and enabled when a check box is checked, and the opposite when the same checkbox is not check. This is my problem
Private Sub cbpDiscAlum_Click()
Dim myOption As Control
Dim myValue As Boolean
myValue = cbpDiscAlum.Value = True
If myValue = True Then
For Each myOption In pDiscounts.Controls
myOption.Visble = True
myOption.Enabled = True
Next myOption
Else
For Each myOption In pDiscounts.Controls
myOption.Visible = False
myOption.Enabled = False
Next myOption
End If
End Sub
It is the 5th command where it gets hung up: For Each myOption In pDiscounts.Controls. I am sure I am spelling both of the names correctly: the checkbox, and the group name.
I've created a custom ribbon which contains checkboxes that hide or show columns.
I would like to change the enable state of the checkboxes while the user is interacting with the spreadsheet.
For example:I would like to disable all of the checkboxes if they are not viewing sheet1I would like to disable the second checkbox if the first checkbox is unchecked.
I know how to set these all on initialize. I just have not figured out how to update these controls after it has been opened.
I have 2 combo boxes which appear to have called themselves Drop Down 12 and Drop Down 28. I would like to put a macro on 12 that when a user clicks it DD28 automatically goes blank.
View 2 Replies View RelatedI have text boxes in excel that hold text (obviously) over a period of several days. It gets updated daily, so I want to change the font color for the new text that is added daily rather than all the text. Is there a way to do this?
Also, is there a way to get the verticl scorll bar to always show on the right hand side of the text box? The way it is now, I have to click once or twice in the text box before it shows up. I would like the person reading it to automatically know that there is text not presently in view so they know to scroll down for more information.
I've created a combo box in excel with the macro recorder. This is the code that came back:
Sub test1()
ActiveSheet.DropDowns.Add(1305, 52.5, 242.25, 39).Select
With Selection
.ListFillRange = "$AW$4:$AW$18"
.LinkedCell = "$AX$5"
.DropDownLines = 5
.Display3DShading = False
End With
End Sub
This always results in a default font size of 8 for my list. Can anyone tell me how to modify the code above to change the font size to 14? And how to modify the color of the list.
Im assigning some codes to certain autoshapes. I have a few hundred autoshapes to assign this code to. Whats the best way to determine the name of the autoshape?
View 3 Replies View RelatedI would like to change a combo box back to a specific value, based on a change in C4.
So no matter what happens, if c4 changes at all, the value in the combo box gets reset....
Ive got a cell on a worksheet, that is controlled by a Control combo box. Is there anyway to change the value of the cell, and therefore the combo box, by using a macro. I need the macro to activate when the workbook is exited.
View 3 Replies View RelatedI am trying to use a userform ( Combo Box) to update my named cell "Aircraft1" then based on the value selected change the color of an object.
The code works great if I manually enter the value in the cell "Aircraft1", however if the dropdown list selects the value the object does not update its color.
Is there a way to update the cell via a combo box, and then have the VB code change the color of the object?
This is my
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("Aircraft1")) Is Nothing Then Exit Sub
ActiveSheet.Shapes("Arrow1").Select
With Range("Aircraft1")
If .Value = 1 Then
ActiveSheet.Shapes("Arrow1").Select
Selection.ShapeRange.Fill.Visible = msoTrue
Selection.ShapeRange.Fill.Solid
Selection.ShapeRange.Fill.ForeColor.SchemeColor = 17
When I hit the print button the worksheet prints on the paper in the bin. However, there are times when I need to print the worksheet on different paper which requires me to go into the properties and change the paper source from Automatically Select to Manual Feed. I have been trying to created a macro what will switch to Manual Feed, print the worksheet and then switch back to Automatically Select but have been unsucessfull.
View 3 Replies View Relatedif I have a combo box
with a range of value
apple
pear
orange
How do I make it so that if pear is selected in A1 its value is pear and not 2?
I've increased the size of my combo box but the text remains in size 8.
I've tried to click on the box and open the properties but i can only get the sheet properties...
How do I format the text in an ActiveX combo box? I would like to increase the font.
View 9 Replies View RelatedI want to make a combo box in excel that, if i select it the sheet inside the combo box will appear.
Example:
Inside of combox are: Sheet1
Sheet2
Sheet3
If i click combo box and i choose sheet3 the sheet3 will appear.
How can i do this? theirs a macro code to use?
I'm building an application that uses a large number of activex combo boxes. These boxes are getting loaded from specific fields in an associated database.
I know ActiveX combo boxes can be buggy; I'm wondering if anyone has found a way around the text appearance inconsistencies seen in these controls? e.g., sometimes the text is smaller, sometimes it's spaced wider, sometimes it appears at the top of the combo box sometimes in the center.
I put a screen shot of what I'm talking about in a word doc along with a control properties screen shot, All controls have the same properties except for the text property.
I want to populate the values of two textboxes that we will call TextBox5 and TextBox6 from columns W and X of a spreadsheet called "PowerAnalysis" when a selection is made form ComboBox5.
The ComboBox5 works perfectly now. I just need it to populate the other two text boxes.
All the data resides in the same row on the same sheet of PowerAnalysis when the selection is made in ComboBox5.
I hope I have been able to give a clear picture of what I am wanting to do.
The first combo box is on a userform so that a subject can be selected
View 3 Replies View Relatedi have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
So I have been playing around with the tab colors on my workbook and am trying to figure out the correlation between color brightness and the auto change from black text to white text. I've noticed that if the Green color value is higher, excel is more likely to use the black text. If Blue is high, white. Green takes precedence over Blue and Red is just kind of in its own world.how excel calculates this?
View 2 Replies View RelatedI am my excel worksheet (excel 2010) I have one cell that changes every day (number). I want this number to open my htm document and replace the same number in a string in the htm and save/close this.
An example:
My htm document is located at C:/ and named XX.htm
The number I want from excel is in cell A1 in sheet1, and the worksheet is located in D:/ named yy.xlsx
And the text(number) I want to replace is in the following string in the htm document, in this string it is 72, next day it can be 30:
src="Bilder/72.png"
