I have a combo box named Combobox5 and a text box named Textbox7.
Should this code go in the Userform Initliaze or where? I have tried placing it in both the ComboBox5 Change evnent and no luck so far.
Range("G22:J28").Value = TextBox7.Text
Again this code is dependant upon the user making a choice from ComboBox 5.
I have also tried:
Range("G22:J28").Value = TextBox7.Value
I am using Excel 2003. Any ideas??
i am trying to use a combo box to change the properties of a text box. i think i can do this by having it look at the cell link that i sent and then changing the text box appropriately with something like this:
View 3 Replies View RelatedIs there a way that I can click on a link in a worksheet that is linked to a data list in in another sheet and display the results in a text box on the original sheet containing the link.
For example ...
I have an excel document that contains two columns and ithe columns there are more than 50000 rows of data. The first column contains numbers and the second column contains text filled from only three values for example work, work 1 and work 2.
I want to see only the three identical same values from column A where the values from column B are diferent.Example of how to look the result criteria:
Column A Column B
123456 work
123456 work 1
123456 work 2
using VBA, I created a simple problem that I can't figure out how to solve in worksheet 2, I have 3 worksheets.
1. Players - Complete info of players
2. Members - When I select the team name, I'd like to display the info First Name, Last Name and Team only for the team name I've chosen. This should automatically change whenever I select a team name.
3. Team Codes - Tables I used for my vlookup and drop down list.
I have attached my file for your reference.
I have 180 different images to display with 60 different situations. This means that for every combination of 4 variables, there are 3 images. What I have set up right now are combo-boxes where a user would be able to select the situation which best suits them within the four variables. What I would like to happen would be to have the 3 images pertaining to the chosen variables appear within the worksheet. These images could be put within a worksheet or accessed through a folder.
View 3 Replies View RelatedThe worksheet perfectly performs as expected, big thanks to JBeaucaire again. Now, as am looking around of the file and doing some exploration on the array, as I was trying to make this applicable to real life application, I noticed the following mysteries...
1. When I tried to delete some rows, The Members Sheet output went wrong and displaying #N/A. I noticed it's because the formula range have change. But it would be hard for a new user to re-arrange it over and over again everytime when a row is deleted.
2. I've been trying to solve this problem to no avail. I found this link that gives me an idea how my worksheet should work, this was already solved but I can't apply it on my worksheet...
http://www.excelforum.com/excel-prog...nd-resort.html
3. I would like to add another column on A to put the 0 and 1 on, but I don't need to delete this column after the resort so that next time if I need to delete another row existing row i'll just replace the existing 0 with 1 on column A.
I have a document that has a sheet for each project, 3 at the moment. On this sheet are various text & currency fields, 24 in total.
I want to create an overview document for all of the projects so it will display lines from the individual project sheets that are currently showing as NOT complete.
To clarify I currently have 4 categories for status at the moment: Planning, In Progress, Awaiting Inspection Report, Complete. So I want my overview to show anything that is not complete.
I also have no need for all of the 24 columns in the overview either, I've highlighted about 9 at the moment.
I think maybe a lookup and If combination is my answer but I'm not altogether sure if there are other functions out there that I just haven't come across yet, or how to combine an if and lookup.
Also I would like the data to be sorted firstly by Inspection Location and then in date order if possible. I know I could use the auto filter option once the data is pulled across but it was be easier for the other users of this document whose skills range greatly.
I just want to create a combo box that will allow my manager --- not so good at using menu commands or the scenario manager --- to choose one of five different budget scenarios. I can't seem to get the actual scenarios to change when the selection is made from the combo-box.
This is the
Been doing pretty good up till now but I can not figure out how to get a combo box in the first blank cell of column A. I am using the named range 'Units' and there are almost 900 of them so I need the combo box.
View 8 Replies View RelatedIm using code from website: http://www.contextures.com/xlDataVal11.html
to display a combobox when I double click any cell that contains a validation list in it. I'm not great with VBA so I am having problems finding what each part of the code does. This is causing problems for another bit of code that I use to display a msgbox when certain values are selected from the list.
The MsgBox shows up great when I select an item from the validation list but does not work at all when I select the same item from the double-clicked combo box. It would be great if I could get the MsgBox to work both ways. This is the code that displays the MsgBox when target value is selected from list
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.AddressLocal(False, False)
Case Is = "B4", "B5", "B6", "B7", "B8", "B9", "B10", "B11", "B12"
If Target.Value = "H" Then
MsgBox "This is a pop for extra information. Savvy?", vbYesNo, "Yo!"
End If
End Select
End Sub...............
I know how to turn the autocomplete on and off but I don´t have a clue where I configure the data range or the cells to display the list when the combo box is clicked.
I am assuming that this is done in the Edit mode at "linkedCell" and LisfFillRange ... yet I can´t get this to work.
I am using excel 2010. When I click on cells on one column, something like text box will pop up with information related to that column. How can I get rid of this text box. How to disable this text box which I think it has a link between the text box and cells on that column.
View 1 Replies View RelatedI have 2 combo boxes which appear to have called themselves Drop Down 12 and Drop Down 28. I would like to put a macro on 12 that when a user clicks it DD28 automatically goes blank.
View 2 Replies View RelatedI've created a combo box in excel with the macro recorder. This is the code that came back:
Sub test1()
ActiveSheet.DropDowns.Add(1305, 52.5, 242.25, 39).Select
With Selection
.ListFillRange = "$AW$4:$AW$18"
.LinkedCell = "$AX$5"
.DropDownLines = 5
.Display3DShading = False
End With
End Sub
This always results in a default font size of 8 for my list. Can anyone tell me how to modify the code above to change the font size to 14? And how to modify the color of the list.
I want to be able to change 2 cell info based on 4 checkboxes used. So based on a check box i check, it will populate what info i assigned to it the box. See below,
1 cell12342 cell
I have 4 checkboxes and 2 cells i need populated by whatver box i check. I have the following formula, but not sure how to tie in all the cells together.
=IF(A1,"Checked message",") If 1 CELL gets changed when checked, i need 2 CELL to change as well. Example, I checked box one and so 1CELL should change to, lets say to a set dollar amount like $12, and then 2CELL would also change to another entry say a set dollar amount, like $15 or whatever both based on checkbox one. BUT i also want to populate those same 2 cells with different amounts if i check the other boxes.
I would like to change a combo box back to a specific value, based on a change in C4.
So no matter what happens, if c4 changes at all, the value in the combo box gets reset....
Ive got a cell on a worksheet, that is controlled by a Control combo box. Is there anyway to change the value of the cell, and therefore the combo box, by using a macro. I need the macro to activate when the workbook is exited.
View 3 Replies View RelatedI am trying to use a userform ( Combo Box) to update my named cell "Aircraft1" then based on the value selected change the color of an object.
The code works great if I manually enter the value in the cell "Aircraft1", however if the dropdown list selects the value the object does not update its color.
Is there a way to update the cell via a combo box, and then have the VB code change the color of the object?
This is my
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("Aircraft1")) Is Nothing Then Exit Sub
ActiveSheet.Shapes("Arrow1").Select
With Range("Aircraft1")
If .Value = 1 Then
ActiveSheet.Shapes("Arrow1").Select
Selection.ShapeRange.Fill.Visible = msoTrue
Selection.ShapeRange.Fill.Solid
Selection.ShapeRange.Fill.ForeColor.SchemeColor = 17
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
if I have a combo box
with a range of value
apple
pear
orange
How do I make it so that if pear is selected in A1 its value is pear and not 2?
I've increased the size of my combo box but the text remains in size 8.
I've tried to click on the box and open the properties but i can only get the sheet properties...
How do I format the text in an ActiveX combo box? I would like to increase the font.
View 9 Replies View RelatedI have a regular table of data and dependent on the info within a column of cells I would like the info to appear within one of 3 new sheets. BUT.... I can't figure it out because the info forms an irregular part of text within the cells in a specific column - Obviously if it was dependent on the whole of the text I could use Vlookup but it's not.
If it needs further clarification, a column of cells may have, say, "blahblah234/PLblah" -> If this cell contains within the text "PL" then it should have the whole of the row in the new sheet, if not then blank.
I want to make a combo box in excel that, if i select it the sheet inside the combo box will appear.
Example:
Inside of combox are: Sheet1
Sheet2
Sheet3
If i click combo box and i choose sheet3 the sheet3 will appear.
How can i do this? theirs a macro code to use?
I'm building an application that uses a large number of activex combo boxes. These boxes are getting loaded from specific fields in an associated database.
I know ActiveX combo boxes can be buggy; I'm wondering if anyone has found a way around the text appearance inconsistencies seen in these controls? e.g., sometimes the text is smaller, sometimes it's spaced wider, sometimes it appears at the top of the combo box sometimes in the center.
I put a screen shot of what I'm talking about in a word doc along with a control properties screen shot, All controls have the same properties except for the text property.
I wanted to replace Array(Array(1,1),Array… in TextToColumns.
http://www.ozgrid.com/forum/showthread.php?t=140770
http://www.excelforum.com/excel-prog...o-columns.html
I would like to fill in a a form on page /sheet one and have the same info on every sheet that follows is it possible?
View 3 Replies View RelatedI have attached a spreadsheet and I am trying to capture the info in lines 2,7,12,17 and return the info into column d,e,f,g
The info in these columns at present has been manually entered but I am sure it could be automated.
OOL Roster Final 18-31Aug14.xlsx
I want to populate the values of two textboxes that we will call TextBox5 and TextBox6 from columns W and X of a spreadsheet called "PowerAnalysis" when a selection is made form ComboBox5.
The ComboBox5 works perfectly now. I just need it to populate the other two text boxes.
All the data resides in the same row on the same sheet of PowerAnalysis when the selection is made in ComboBox5.
I hope I have been able to give a clear picture of what I am wanting to do.