Ive got a cell on a worksheet, that is controlled by a Control combo box. Is there anyway to change the value of the cell, and therefore the combo box, by using a macro. I need the macro to activate when the workbook is exited.
View 3 RepliesI'm trying to set up a macro to to run and control the AutoFilter in my Excel Spread Sheet. Essentially, all i want to be able to acheive is, instead of inputting the cryteria myself in the auto filter, i want the macro to select the cryteria from a specific cell.
Example...
Running the autofilter, normally you would select "equals or grater than" option and you would input a figure then click the "or" option then input "equals or less than" and a new figure and then click ok. This would sort the range; see the example macro...
Selection.AutoFilter Field:=10, Criteria1:=">=01/09/207", Operator:=xlOr _
, Criteria2:="<=31/09/2007"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub
What i want to beable to do is to run a macro which will do the above but instead or requiring the user to input the range cryteria for the filter it would point to a cell to get the value from.
' test1 Macro
' Macro recorded 06/08/2007 by Nigel M Bailey
'
Selection.AutoFilter Field:=10, Criteria1:="> Cell A2", Operator:=xlOr _
, Criteria2:="< Cell A3"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub
In doing this i can validate the selection field and just add a search button which then will be perfect!
If I have a macro sequenced:
Code:
sub test_1(control as iribbon)
call macro1
call macro2
call macro3
call macro4
end sub
I adjust the CUI editor to
Code:
onAction="test_1"
I close everything down and save.
I open it up and click the button on the ribbon and it says it can not find the macro?
For a = 11 To 14
b = 10
If Cells(a, b) = 3 Then
ActiveCell.Offset(0, 0).Range("A1").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-2]>0,RC[-2],"""")"
ActiveCell.Offset(2, 0).Range("A1").Select
End If
Next a
question : if i want to start the looping from the cell i am standing at instead of the defined a=11 to 14 , how ?
or
question : if i want to start the looping controlled by the cell value of the present worksheet say the value of a1 is 19 , and b1 is 30 , then it becomes : for a= 19 to 30 ,how
I would like to change a combo box back to a specific value, based on a change in C4.
So no matter what happens, if c4 changes at all, the value in the combo box gets reset....
I have a table with job numbers in one column and sub tasks for each job in a seperate column. I want to control the filter in the jobs column with a data validation cell. The data validation cell has all the job numbers in it and when I select job number "XYZ" in the data validation cell all other jobs are filtered out of the table.
View 1 Replies View RelatedI am trying to create a menu that calls macros based on your choice using a drop down combobox (from the control toolbox). Everything works except: When i try to reset the drop down to "Main Menu" using the Linked cell $B$1 excel hangs and suts down evertime. What i would like it to do is reset the drop down to "Main Menu" each time one of the other drop downs are selected. I have really enjoyed this forum and it has been a great resource for me in the past I hope someone can help. I have attaching the file for review.
View 3 Replies View RelatedI have 2 combo boxes which appear to have called themselves Drop Down 12 and Drop Down 28. I would like to put a macro on 12 that when a user clicks it DD28 automatically goes blank.
View 2 Replies View Relatedi am trying to use a combo box to change the properties of a text box. i think i can do this by having it look at the cell link that i sent and then changing the text box appropriately with something like this:
View 3 Replies View RelatedI've created a combo box in excel with the macro recorder. This is the code that came back:
Sub test1()
ActiveSheet.DropDowns.Add(1305, 52.5, 242.25, 39).Select
With Selection
.ListFillRange = "$AW$4:$AW$18"
.LinkedCell = "$AX$5"
.DropDownLines = 5
.Display3DShading = False
End With
End Sub
This always results in a default font size of 8 for my list. Can anyone tell me how to modify the code above to change the font size to 14? And how to modify the color of the list.
I am having a with a controlled loop. If the loop is on the last pass and an error occurs, it goes into a never ending loop. Once the error portion of code is excuted, the code resumes to the same line. I'm not sure how to solve this problem. I have attached a sample file with all code if needed.
View 2 Replies View RelatedI have a combo box named Combobox5 and a text box named Textbox7.
Should this code go in the Userform Initliaze or where? I have tried placing it in both the ComboBox5 Change evnent and no luck so far.
Range("G22:J28").Value = TextBox7.Text
Again this code is dependant upon the user making a choice from ComboBox 5.
I have also tried:
Range("G22:J28").Value = TextBox7.Value
I am using Excel 2003. Any ideas??
I am trying to use a userform ( Combo Box) to update my named cell "Aircraft1" then based on the value selected change the color of an object.
The code works great if I manually enter the value in the cell "Aircraft1", however if the dropdown list selects the value the object does not update its color.
Is there a way to update the cell via a combo box, and then have the VB code change the color of the object?
This is my
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("Aircraft1")) Is Nothing Then Exit Sub
ActiveSheet.Shapes("Arrow1").Select
With Range("Aircraft1")
If .Value = 1 Then
ActiveSheet.Shapes("Arrow1").Select
Selection.ShapeRange.Fill.Visible = msoTrue
Selection.ShapeRange.Fill.Solid
Selection.ShapeRange.Fill.ForeColor.SchemeColor = 17
I want to make a combo box in excel that, if i select it the sheet inside the combo box will appear.
Example:
Inside of combox are: Sheet1
Sheet2
Sheet3
If i click combo box and i choose sheet3 the sheet3 will appear.
How can i do this? theirs a macro code to use?
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I am trying to set up a combo box in my workbook so that when the item is selected from the list a particular macro will run according to the selection. I tried with the following codes but wonder why it is not executing when running the macro.
Option Explicit
Sub COUNTRYCURR2()
Dim shtInv As Worksheet
Dim shtT_Country As Worksheet
Dim Row As Long
Dim Row2 As Long
Dim lngEndRowInv As Long
Dim lngT_Country As Long
Set shtInv = Sheets("Inventory")
Set shtT_Country = Sheets("T_Country")
lngEndRowInv = shtInv. Range("A" & Rows.Count).End(xlUp).Row
lngT_Country = shtT_Country.Range("A" & Rows.Count).End(xlUp).Row
shtInv.Cells(1, 19).Value = "Country Code"
shtInv.Cells(1, 20).Value = "Currency Code".................
i need is a macro that once run selects a certain (or multiple) comboboxe's values. Eg I select macro 'test' and it selects value 1 on combo box 1, value 2 on combo box 2 etx..?
View 2 Replies View RelatedI'd like to use a button to run a macro that inserts a combo box, but can't seem to change the properties of that box within the macro. For example, I need to enter the linked cell, but when I run the macro, the actions in the combo box's properties dialogue don't record (I'm not familar with visual basic, so I'm 'recording' the macro).
View 13 Replies View RelatedHow to get a macro that will display a chart based on the values of a combo box?
i have a combo box, with list info
and a button.
what i am aiming for is, if "total A/R" is selected in combo box, when Button is pressed, i want it to display that specific chart.
is that something that is possible?
The first combo box is on a userform so that a subject can be selected
View 3 Replies View RelatedI'm trying to figure out how to activate a macro from combo box or list box.
But no success.
I have a list of names:
AAA
BBB
CCC
111
222
333
That I can view through the combo box.
I have created a list of macros, that carry the same names,
AAA
BBB
CCC
111
222
333
The Q is: how can I link each name to its own macro?
so when chosen, will activate the macro?
I have created a combo box and have inputted the values
Jan, Feb, Mar (think you get the idea).... Dec
I am looking to assign a macro to each value so that each one shows a graph, i have already created the macro’s to show the graphs. Just unsure how to make them work with the combo box
I need a macro to search for certain info on different sheets
combine them and place it on a Report sheet.
This is extensive and complicated so it would be easier if I
emailed the .xls file
If you think you can help, let me email you the file.
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies View RelatedI have a combo box in a worksheet with a macro written for it that works fine but when I open the worksheet it doesn't run automatically, I have to find the macro and tell it to run.
How can I get it to run as soon as the worksheet is opened
Here is the code for the macro
Private Sub combobox()
ComboBox1.clear
ComboBox1.AddItem "Mit Rekuperator"
ComboBox1.AddItem "Ohne Rekuperator"
End Sub
Private Sub ComboBox1_Change()
Run "PinchInternHeatExchanger"
Select Case ComboBox1.Text
Case "Mit Rekuperator"
ActiveSheet.Range("I62") = Worksheets("uorc").Range("L99")
Case "Ohne Rekuperator"
ActiveSheet.Range("I62") = Worksheets("uorc").Range("E11")
End Select
Run "PinchPoint"
End Sub
I have code which changes the worksheet tab names based on contents of a cell. I borrowed some very useful code from a previous thread. I'd like to modify the code so that the tab name updates everytime the cell contents change.
My code is below:
Code:
Sub ReNamer()
For L = 3 To 9
Sheets(L).Name = Sheets(L).Range("A1").Value
Next
End Sub
Is it possible to run a macro when the value of a partcular cell is changed? (and if so how!)
View 9 Replies View Related Basically, I need to reformat a set of data (see before and after). A specific column should only contain 1 value, if there is more than 1 value it will be separated by a comma. If this column contains more than 1 set of data then I would need to insert a row and duplicate the information based on how many different sets there are. All the copied data should remain the same with the exception of the "Key" column, it should only have 1 value and each copied row should contain the corresponding value in the key field.
BTW - it could be on the same sheet or a different worksheet (doesn't matter)
BEFORE
Name Number KEY Date
Name1 1 a,b,c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one,three 12/1/2011
AFTER
Name Number KEY Date
Name1 1 a 12/1/2011
Name1 1 b 12/1/2011
Name1 1 c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one 12/1/2011
Name 3 5 three 12/1/2011
Three cells - A1:A3. If A1's value is modified, I would like to have some sort of event macro that recognizes the change and thus initiates and clears the values of cells A2 and A3. Basically I don't want to have to user-initiate the macro...but have the actually changing of A1's value initiate the macro.
View 6 Replies View RelatedI am trying to run a macro when any cell in a range changes. I have got this to run, but only on one cell, not any of the cells in a range.
Working code:
[Code]....
Non working Code:
[Code] .........
I am at a loss as to why the range code won't work, or why the first code won't work without makig the cell reference absolute.