Common Macros Ready To Use In Every Instance
Mar 16, 2009i have a couple of macro's i use regular. can these be loaded when i open excel so they are there to run on any workbook i open?
View 9 Replies
ADVERTISEMENT
Subtract First Instance Of Data From Last Instance In Columns
Mar 7, 2014I need a formula in Column E to find the results for Column E or subtract A2 from C3, C3 from D3, A4 from C3, B5 from D5 and A6 from D6 .
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
border: 1px solid #ccc;
[Code]....
Clear Range Ready For AdvancedFilter Copy To...
Mar 27, 2008I'm using this macro to retrieve data from a worksheet within the same workbook. As you can see, I've set the destination range between row 12 and row 20. The problem is this code clears all text (not other formatting) from row 12 down even farther than the row 800 that is the end of my Origin range. QUE: How do you limit the reach of the ClearContents code?
Origin Name Range Definition
= 'ORDERS 1st QTR 08'!$A$1:$J$800
Sub GetData()
Application. ScreenUpdating = False
Range("A12:J20").ClearContents
Range("Data_Table"). AdvancedFilter Action:=xlFilterCopy, CriteriaRange:= _
Range("M1:M2"), CopyToRange:=Range("A12"), Unique:=False
Application.ScreenUpdating = True
End Sub
Show Sheet Range Ready For Printing Via UserForm
Feb 27, 2008I am trying to create a command button on a userform that when pressed will only display a specific worksheet of an excel workbook. I have the userform setup with the command buttons that will point to a specific worksheet but it is still behind the userform.
How can i make it so that when i hit the command button in the userform then print preview is shown for that worksheet, and the other worksheets are hidden. I also want to make it so that the workbook is hidden and all you see is the userform until you select a sheet.
Excel 2010 :: Crash - Ready Calculate Flashing Taskbar When Closing / Opening Userform
Jan 8, 2014Excel will hang up as if it's gone into a continuous loop (Although no looping macros are active) when you open or close a user form. The task bar in Excel will flash Ready Calculate. Visual basic reports no code is running but excel either crashes or becomes very unresponsive. I have to exit and reopen excel in order to fix the problem . It also doesn't happen at any one specific point it can vary. I have various VLOOKUPs around the workbook and userforms display the correct information. I use the INDEX formula in the control source of textboxes. I also use the offset formula to make sure DTPICKER displays correctly.
I am using 'Option Explicit' at the start of all my code. I have tried a 3rd party code cleaner. No visual Basic references are MISSING
[URL]
Encourage Enabling Of Macros: Disable Macros When Opening Then The Worksheet Menu Bar And Other Command Bars Are Still Available
Aug 26, 2009I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies View RelatedEnable/Disable Macros When No Macros Are Present
Jul 28, 2008I have a user that keeps a maintenance log in an Excel worksheet and sends an updated copy once a week to a board member. Two weeks ago, the board member started complaining that he was prompted to enable/disable macros on opening and became worried when my user stated that no macros were used in the book. He is now concerned that we have sent him a virus.
I know the file is clean because I've scanned it, and when I look at the file in VB, there are no modules or classes present just the Sheets 1-3 and the ThisWorkbook file. None of these objects have any code in them. My user does have some macros in PERSONAL.XLS but they are not used in the workbook in question.
No one else gets the prompt for enabling/disabling macros. Even if I set my security to prompt for any macros, I get no message. I'm convinced that there must be some setting in his Excel that is causing this individual to get this message. Is there anything else other than a macro that would cause this?
Add 2 Instance >=.01 Of First Instance Of >=.01
Jul 29, 2006I have the following
Private Sub test2()
Dim c As Range, t As Long
With Worksheets(3)
.Unprotect
Set c = Range("AO10", cells(Rows.Count, "AO").End(xlUp))
t = Application.WorksheetFunction.Max((Application.WorksheetFunction. CountIf(c, ">=.01") * 2), 0)
Sheets("Template").Range("D3").value = t
'Range("D3") = t
End With
End Sub
The code is suppose to get the value of >= 1 percent from AO10 then go down the column until it finds the second instance and then add that number to the tile.
Thanks for any help in advance.
Have a great Friday all! : D
Kurt
Returning First Instance Of Zero
Jan 8, 2009I am trying to create a formula that will search a row left to right for the first instance of zero and return the corresponding column label. I had this working for a smaller table using a couple of hidden columns with nested ifs however the new data set is approximately 25 columns wide and it will get very messy using the same approach. See attached sample with desired results.
View 2 Replies View RelatedFirst Instance Of A Value In A Column
Jul 10, 2009I need a simple formula which does the following: I have a column of numbers, and I want to find the first instance which is equal or greater than a specific number. For example,
Column A
23
41
67
89
51
21
If the specific value is 55 the formula needs to return: 67
if the specific value is 10 the formula needs to return: 23
VLOOKUP - Last Instance
Aug 11, 2009Using Excel 2003 SP2. The formula =vlookup("apple",table,2,false) would return the data in the second column of the array named "table" for the FIRST INSTANCE it comes across for the word "apple." Is there a formula to have it return data for the LAST INSTANCE? This is one where I say to myself "Self, there has got to be a way to do this," but I just can't figure out what it might be.
View 4 Replies View RelatedFirst Instance Of A Particular Cell?
Oct 24, 2013I have a cell..say A1...which contains a value...now I have a row say A2:A15 which contains 14 values and I want to highlight the first instance of cell A1.
View 4 Replies View RelatedClose Instance Through VBS
Aug 19, 2009how to close the instance of excel created by my VBS script.
I run the script to open a workbook run a macro within the workbook and save it. I'd like to also close the workbook and the instance of excel.
If I close the workbook within the end of my macro I get an unknown run time error from my script. If I elect to just save the file and close it within the end of script, the workbook closes but the instance of EXCEL.EXE is still running in task manager.
SUM But Only The First Instance If There Are Duplicates
Dec 23, 2005This is an export from a shopping cart. Each row is an individual SKU that was ordered. So if John Doe orders 4 items on the same order, I've got 4 rows with most of the data being the same. I want to sum my "Grand Total" column, but only take one instance when the Order-ID is repeated.
Now the sample data: ...
One Instance Of Each Value Within Text Range
Jul 10, 2014I have a list of text cells in column A, the list is a dynamic one that changes depending on the property selected in a cell of another sheet.
Example data... Column A is Block Name, Column B is Room Number.
---------A----------------B-------
1--Main Building-------001
2--Block A--------------001
3--Block A--------------002
4--Main Building-------002
5--Block B--------------001
6--Block A--------------003
7--Main Building-------002a
8--BSS House----------BSS
9--Main Building-------003
What I need is for a formula that lists one example of each instance included in Column A.
As per the example data above, the expected results when dragging down from C1 through to C9 would be:
---------A----------------B--------------C--------
1--Main Building-------001-------Main Building
2--Block A--------------001-------Block A
3--Block A--------------002-------Block B
4--Main Building-------002-------BSS House
5--Block B--------------001-------
6--Block A--------------003-------
7--Main Building-------002a-------
8--BSS House----------BSS-------
9--Main Building-------003-------
I know I could use a pivot table to do this but as I need this to be dynamic, and also to be used with Excel on an iPad Air, I can't as it doesn't support pivot tables or VB to automatically refresh it.
Index With Multiple Instance
Jan 30, 2014I want to find top 2 performer in cell A17 & A17 in my attached sheet. Column B2:B13 changes everyday, so the name of performer changes accordingly. But today my top 2 performers achieved same but my formula is giving the same name.
Is there anyway to find out the other name i.e Ahmmed Shawkat Hossain here instead of Khan Md. Abdul alim again?
Attached File : Index 2nd name.xlsx
2d VLookup: Unique For Each Instance
Jan 5, 2010Column A contains numbers that repeat themselves. in column B codes are assigned to each number. numbers in column A may have multiple codes in column B. but are unique for each instance the same number may appear in column A.
what i'm trying to do is.
have the numbers in column A show only once and then have the codes for the corresponding codes appear each in seperate columns rather than all in one.
Switch Between New Instance Windows?
Nov 15, 2011Im having trouble switching between windows that are open in separate instances of excel.
I used to be able to switch easily between these workbooks when they were both being being run in the same instance of excel.
But since having to change it so the workbooks are opened in seperate instances, i cannot get it to work, the code just fails when it trys to activate the first window.
I currently have the below code:
Code:
Sub CloseAndSave()
Application.EnableEvents = True
'//Activate InfoHub workbook and put a tick in the checkbox.
Workbooks("403 InfoHub.xls").Activate
Sheets("HOME PAGE").ToggleButton1.Value = True
[Code]..
Is there anyway to do this?
VLookup Or Index Value Of First Instance?
Jul 6, 2012I have data on two separate tabs. Data in columns A of both tabs potentially match. I am trying to identify and pull the value in column C of the second tab where the values in columns A match and the first instance where the value in column B on the second tab is less than the value in column B of the first tab. The values in both columns B are dates.
column A first tab = column A second tab
column B first tab < column B second tab (first instance of less than)
pull value from column C on second tab to appropriate row of column C on first tab.
Find Last Instance In A Column
Mar 31, 2006I am in the process of designing an inventory like spreadsheet with prices. If possible, I'm trying to find a well to look at a column for every instance an item shows up (lets call them apples) & then find the LAST instance of apples showing up to pull the pricing of that row only. Is this possible?
View 9 Replies View RelatedFind Every Instance Of 0 Within A Workbook
Mar 27, 2007I need a Macro that will find every instance of 0 within a workbook and then replace that value with an average of the values in the two cells above it and the two cells below it?
Multiple Instance Of Excel
Feb 5, 2010I am working on an application for a monthly sports tournament that I run. There are three workbooks to this application: the Administration workbook, the Bracket workbook, and the Leaderboard workbook. I currently have a dual monitor setup (extended, not clone) with my laptop in front of me and a large TV on the wall for the players to see.
In order for the players to see the bracket and the leaderboard, I open excel, then I open the Bracket.xlsm workbook, then the Leaderboard.xlsm workbook, and I drag those to the TV. I then open another instance of excel on my laptop, and open the Administration workbook. This stays on my laptop and the players cannot see it.
Here's what I want it to do:
In less words, the administration workbook controls the other two workbooks. Every time a player reports a win/loss, I enter that into the Administration workbook, and that needs to update both the bracket and the leaderboard, so the players can see it on the TV. So, basically, all the data is in the administration workbook, and the other two serve as displays for that data in a format the players can understand.
Here's my problem:
When I run a macro that is supposed to update the other two workbooks, I get an error: "Runtime Error '9': Subscript out of range." I believe this is because of the seperate instances of Excel. Since Bracket and Leaderboard are in a different instance than Administration, it can't 'see' those other two workbooks. Below is the part of the code that deals with these three workbooks: ....
Lookup Nth Occurrence Or Instance
Aug 23, 2007I have a very very long weekly table of, say, sales regions, items sold, revenue, profitability, etc.
(Very long here means 120,000 rows, and in Excel 2007 - please don't hold this against me! )
Let's assume Row 1 and Column A are for headers. So Column B is Sales Region and Column C is Item Name. The first Sales Region, beginning in B2, let's call it "America", will repeat (B3, B4....) until the Item Names are done for that region. Then the next Region starts, "Australia", and the list of Items starts again, etc.
Not all the Items will be sold in every Region each week, and even some Regions may disappear from the table one week only to reappear a few weeks down the road. The table is Sorted alphabetically, though, first by Region, then by Item.
One way to VLOOKUP week over week information from last week's report onto this week's report is to concatenate both weeks' Region and Item information (=B2&C2) seperately, and VLOOKUP by that. This returns only combinations of Region/Item that occured in the current week, and with ISERROR, 0 for combinations that occured this week, but not last week. As far as what it returns, this is fine for our purposes but with several pieces of information to VLOOKUP (#, revenue, profit, etc.) and 120,000 rows, it takes forever. Literally over an hour to copy down the week over week parts.
I had the idea that maybe it would be faster if I could define individual VLOOKUP ranges for each Region, and then look up Item within that range. These ranges would vary in placement in the table and in numbers of rows each week, as the number of Items sold in each Region waxes and wanes, hence "dynamic ranges" - I hope I've used that term correctly.
Is there an effective, efficient way to return the row numbers of the first and last instances of a given Region, and use that range for the Item VLOOKUP?
How To Delete Another WorkBook Macros Using Macros
Jul 23, 2005What is the commands or script for deleting a macro automatically using
another workbook macro.
Hiding Macros From The Run Macros List
Jul 14, 2008Is there a way to hide a macro from the list where you choose which to run, but not in the VBA editor? The userbox I just created calls upon 2 different macros, and has a macro to bring up the userbox. I need a way to hide the macros in Module3 from selection, but keep the macros in Module4 available to choose to run.
View 9 Replies View RelatedHighlighting All Duplicate Values Except First Instance?
May 22, 2014I need to highlight all the duplicate IP-addresses in my sheet except the first one.
What I did:
I chose the range (F column) -> Conditional formatting -> Highlight cell rules -> Duplicate Values. It highlighted all the duplicate values so i googled how to highlight the duplicate values except the first one so I came across a formula =COUNTIF($F$2:$F2, F2)>1
So I added the formula and now it does not highlight the first duplicate but only the second and not the third and fourth and so on.
What am I doing wrong?
Edit: I have sorted them in order and in one IP-address I have 6 duplicates but it highlights only the last one when I want it to highlight all of them except the first one.
How To Remove Text After The Second Instance Of An Asterisk?
Jun 18, 2009I'm trying to convert variable length strings which are being copied from a display and loaded into an array.
I have it working fine for the majority of the data, which comes in looking like "*ABC@US" or "*AABC@US"
However, some of the data looks a bit different, particularly lacking the @ symbol. So what I end up with is
"*ABC US*ABC US*ABC US"
What I need to get to is just "ABC US" FYI the US part can be 1-5 characters.
SO... I need a way to truncate anything after the second instance of the asterisk. Haven't been able to get it to work using various trim, mid, len, left, right, etc functions.
Excel 2010 :: Opens New Instance For Each Fie
Dec 12, 2012In the last couple of weeks my copy of Excel 2010 has started acting strange. Now when I double click an xls or xlsx file in Windows Explorer, it tries to open a new instance of Excel, whic means that it tries to reopen Personal.xlsm and Personal.xlsb, and finds they are already open, so it gives me an error message. Previously it perfectly happily opened the document in another window in the same instance, which is presumably much more memory efficient quite apart from the file locking problem mentioned. How do I get it back to the way it was before? Is this another of MS's famous overnight downgrades?
View 2 Replies View RelatedHow To Activate Workbook In Separate Instance
Apr 18, 2009-I've been trying to get an answer to this problem for some time and I would like to try again from a different approach.
I may have 5 workbooks open in 5 different Instances of Excel. The number of files open varies. When the below Function is called, it checks to see if the file, trying to be opened, is already open or not.
Currently, if the file is already open, a mesage is displayed stating that it is open and the user has to search through tabs looking for the file so that it can be displayed.
What I want to do in place of a message, is activate the file that is already open and display it. No message necessary.
I have tried "Application.Activate" and can not make it work.
Macro VBA Find Last Instance Of A Word
Sep 16, 2009I have a spreadsheet which I am trying to put in a macro to add a new page (below the current page in the same worksheet) so that users who are unfamilair with Excel can simply do this.
I have got the macro to copy the cells I want and can get it to paste but the issue is I don't always want it to paste in the same place. The current document is 1 page long but it may need to be up to 10 pages long. I am trying to get it to find the last instance of the word "COMMENTS" and then paste the copied info 3 rows below that.