Highlighting All Duplicate Values Except First Instance?
May 22, 2014
I need to highlight all the duplicate IP-addresses in my sheet except the first one.
What I did:
I chose the range (F column) -> Conditional formatting -> Highlight cell rules -> Duplicate Values. It highlighted all the duplicate values so i googled how to highlight the duplicate values except the first one so I came across a formula =COUNTIF($F$2:$F2, F2)>1
So I added the formula and now it does not highlight the first duplicate but only the second and not the third and fourth and so on.
What am I doing wrong?
Edit: I have sorted them in order and in one IP-address I have 6 duplicates but it highlights only the last one when I want it to highlight all of them except the first one.
View 5 Replies
ADVERTISEMENT
Dec 6, 2008
In Column A, there are about 2000 plus entries, is there a simple formula to highlight the duplicate values in conditional format, so that the duplicate values stand coloured.
View 2 Replies
View Related
Jun 17, 2013
I have a set template for 3 sheets. I copy/paste data into all three sheets within the template. Some data are repeated twice within the 3 sheets. How can I highlight the duplicate data between these sheets?
View 5 Replies
View Related
May 5, 2006
I want to write a macro that highlights duplicate values within a single column. I found - on this site a macro that removes duplicate values, which is huge, but sometimes I just need to highlight duplicates values rather than remove them.
View 2 Replies
View Related
Nov 24, 2009
I would like to check column B and if any of these values match values in column J hightlight the cell on the same row as the match on column E green. I don't know much about excel but this would be a tremendous help because i'm looking through quite a bit of data. I've tried using conditional formatting and i can't seem to get that to work for my needs. Let me know if you need anymore information.
View 13 Replies
View Related
Jul 17, 2008
I'm use with this macro to Highlight duplicate cells BUT the macro highlight only from the second duplicate
I need to highlight ALL duplicate cells in column A:A .
FUNCTION like " =COUNTIF($A$1:$A$11,A1)>1 " it's not good for me in this case, i need it with a fast macro
View 9 Replies
View Related
Jun 9, 2009
I have two columns that is use to record last name first name. I need a macro that will find matching names in the columns. i have found some examples for searching one column but have not had any luck finding someway to do 2 columns. in the example below i need it to find and highlight The names Smith John.
View 3 Replies
View Related
Apr 17, 2014
I am trying to set up a workbook for work that will highlight duplicates. I know how to use conditional formatting to do this, however, I would like each duplicate "set" to be a different color in order to better identify. The area that I need to search for duplicates is E3:E27. How can this be accomplished?
View 2 Replies
View Related
Apr 17, 2014
I have a spreadsheet with thousands rows of items on. I am trying to identify duplicate entries based on two or three cells within each row. If those two or three cells are duplicated for that particular ID then the duplicate entry (row) should be highlighted for deletion.
Better still it would be great if there was a macro or formula which would delete that duplicate row.
So for example on the spreadsheet I have attached, I would like rows 6 and 9 deleted or highlighted as the criteria for deletion is a duplication of the entry in the 'YEAR' column AND the 'VALUE' column for the REFERENCEs AB-1234 and AB-9876 which are the unique identifiers for each individual case.
This would leave the end result as per the table below on the attached spreadsheet.
View 4 Replies
View Related
May 17, 2014
I have a large compilation of data on an excel work sheet (I am using 2013). All cells relate to each other by means of dates, names, and other numeric values such as stock numbers, id numbers etc... In one column some stock numbers are repeated. I would like to know if there is a way to set up the program on this worksheet to highlight all repeating stock numbers, not only in the column but across the cells as well, in lieu of doing so manually.
View 1 Replies
View Related
Mar 7, 2014
I need a formula in Column E to find the results for Column E or subtract A2 from C3, C3 from D3, A4 from C3, B5 from D5 and A6 from D6 .
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
border: 1px solid #ccc;
[Code]....
View 5 Replies
View Related
Aug 19, 2014
I have a worksheet that has 3 duplicate values in a particular column, I need a macros that will highlight two of the duplicates row and then another macro to delete the entire row. The duplicate element are in column R. find attached worksheet.
Copy of OCL 2010 (3).xlsx
View 1 Replies
View Related
Jun 12, 2008
I am using the following macro to insert the word "Duplicate" in the first blank column next to a duplicate row. My data is sorted by the first column. Data Example:
12345 a
12345 a DUPLICATE
11111 b
23123 b
Here is the macro I am using and it does not work. It marks the first duplicate it finds then goes into an infinite loop. Any Idea where I went wrong?
Sub MarkDupes()
x = ActiveCell.Row
y = x + 1
Do While Cells(x, 1).Value <> ""
Do While Cells(y, 1).Value <> ""
If (Cells(x, 1).Value = Cells(y, 1).Value) Then
Cells(y, 3).Formula = "Duplicate"
Else
y = y + 1
End If
Loop
x = x + 1
y = x + 1
Loop
End Sub
View 3 Replies
View Related
Feb 15, 2013
I found this spreadsheet on here and I have been trying to customize it to what I need. I am trying to have scores from skins match highlighted. I want only the minimum score to be highlighted but if there is another duplicate minimum score I don't want it to highlight anything. I also need to find a way to count the skins won by each player and have it off to the side.
For those not familiar with golf a Skin is a game where you try to get the lowest amount of strokes on a specific hole. Ex- 4 people play the hole one. P1 scores 4, P2 gets a 3, P3 and P4 get 6. The skin would go to P2 who has the lowest score on that hole.
Highlight lowest number in each column not highlighting if there are duplicates starting at L6 down to L11 and for each column till AC. And the same for the group just to the right on attached file.
On row 13 and 14 it tells me who won a skin. I want to tally up the total skins won by each player. so if Joe's names shows up twice on R14 I want it to tell me somewhere in the sheet Joe = 2
View 6 Replies
View Related
Jan 5, 2004
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
View 9 Replies
View Related
Jan 5, 2004
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
View 9 Replies
View Related
Mar 19, 2014
I want to highlight all the cells in a worksheet that have dropdown lists in blue color. Not sure how to do it.
View 13 Replies
View Related
Mar 26, 2014
I'm trying to rank the values in cells S32:S38 in ascending order while ignoring zeros and negative values. I also need to rank duplicate values with a unique ranking, so that no ranking value is repeated. I tried the formula below, but the ranking values start at "2" instead of "1" and I can't figure out how to fix it.
Formula:
[Code] ....
View 2 Replies
View Related
Jan 25, 2004
I have a collumn with lots of different text values some repeated. how can i count all these values so that it only counts each value once.
e.g
if in cell A1 i have = "apples"
and in cell A2 i have "apples"
and in cell A3 i have "Pear"
View 9 Replies
View Related
Oct 13, 2006
I have data that looks like this:
day# id amount
1 56575 0
1 56675 0
1 56680 0
1 56683 0
1 56681 0
1 51810 0..............
How do you write an excel macro that looks at the number in the first column (day #) and finds all the duplicate id#s in the second column that are in day 1and adds the amounts together in the 3rd column then writes the first column number (day#), second column number(id#) and the third column (sum of the amounts of duplicate Id#) to an new worksheet. Then the macro would loop through day #2 and do the same thing. Notice that the values in the id column are unique in this data set below this is how I would like the data to look. I have accomplished this in a pivot table but my problem is I need a cvs file to export the final data into an external database which is why I need a macro.....
View 2 Replies
View Related
Jan 31, 2014
how to get this with formula:
Column A - - Column B
a - - - - - - - a
a - - - - - - - b
b - - - - - - - c
c
c
View 8 Replies
View Related
Mar 26, 2007
I need to highlight a cell when its value exceeds parameters based on the production line it comes from. If the line is K11, then i need this cell to highlight when its value is either < 0 or greater than 221. If the line is K21, than it needs to highlight when its value is <0 or greater than 474.
View 9 Replies
View Related
Jun 17, 2014
I have data that is set up like this:
A1 B1
Apple Sweet
Apple Juicy
Apple Worm ridden
Apple Round
Apple Cooking
Apple Grannies
Pear Green
[code]......
and would like to combine all of the duplicates from A1 into one field, with all of the options in B1 combined into one cell (separated by a |). So the above table would read:
Apple Sweet|Juicy|Worm ridden|Round|Cooking|Grannies
Pear Green|Tasty|Mouldy
Orange Tangy|Tasty
Peach Rare|Forbidden|Expensive|Squishy
View 5 Replies
View Related
Feb 11, 2013
I am currently busy with a material tracking sheet. The sheet tracks all the material from fabrication to being released from painters.
My problem is that in a summary sheet that I created, I used vlookup to get the exact value of the item number that was released.
Focus on Item # 043-06016
example summary.jpg
[Code] .....
This formula only gets the first value and not the 2nd value that was also released so that in my summary sheet i can get 2
example released items.jpg
View 3 Replies
View Related
Jun 20, 2014
I have a range of times, and with the whole range I cant have any duplicate values, if they are duplicates I would like to add 1 second until all the values are individual.
View 3 Replies
View Related
Nov 6, 2008
I have to compile spreadsheets as tables of various values. One column in particular is a column of ID numbers and the worksheet is very very long. I need a method for checking this one column for duplicate ID numbers.
View 4 Replies
View Related
May 22, 2009
i currently have two columns (e.g. A2:A400, B2:B20) and i am trying to match all the values in B to A, displaying TRUE or FALSE (if the values from B don't appear in A) in column C.
i have tried using the various formula for duplicates, substituting what i thought would be the correct formula, but to no avail.
View 2 Replies
View Related
Nov 19, 2009
I'm trying to find a code that will count duplicate values in columns B,C and D and put the outcomes in B1, C1 and D1.
If've tried conditional formatting but can't count any formatted cells with duplicate values.
Any Ideas?
View 6 Replies
View Related
Aug 15, 2008
I have a list of values (some are duplicates) which I need to rank.
The problem arises where I have more than one of any rank, the next rank skips a number. I need to have a list of sequential numbers and therefore can't have any numbers missing.
Example:
Value Rank Desired Rank
120 1 1
125 2 2
130 3 3
130 3 3
142 5 4
View 9 Replies
View Related
Apr 12, 2012
I have an interesting problem where I am trying to display a list of top ten ranked items and I have multiple items tying for a rank, creating two or more values for one rank.
I have a table that shows the ranking, numbers 1 to 10. I'm using a vlookup formula to find the rank and return the corresponding name from my data table.
The problem I have is there are two that are tied for 3rd place, so I have two ranking at three. The current table looks something like this:
1 Warren
2 Stan
3 Mike
4 #N/A
5 Dan
I can change my table so that the numbers on the left are dynamic so it will display the number 3 twice if there are multiples of the same ranking, but when I do my lookup I'm still stuck.
Is there a way to return the second "3" on the lookup? Or is there a better way to solve the issue?
View 1 Replies
View Related
