I need to convert measurements with (',") symbols attahced to them. See attached cells. Excel does not like the symbols and I cannot figure out a way to have it convert the values into tenths of a foot. For example, from the list below I need to convert 7'2" to 7.17. I have years of data. How do I do this?
7'2"7'1"7'0"6'11"6'10"6'9"
way to convert all symbols ( ) to their equvilant letters (u a) I know that I can do this manualuy with Find replace but I was hoping there was some magic that I am missing.
Please note that the exapples are only 2 of the symbols I need to convert the sheet could contain all of the varieties of symbol.
Lotus 123 had a function where you could graphically, in a cell, show plus symbols(+) or negative symbols (-) for the value of the data. For example if you had a column of numbers that you calculated from the previous year that indicate the change, Lotus, in the next cell would allow you to graphically display the symbols that indicate the strength of the change. So if your result was a positive ten then ten plus symbols would be shown. If it was -20 then 20 negative symbols would be shown. Now the numbers I am looking at could be 600,00 and I believe there was a way to to proportion the symbols for example for every 100,000 put in one symbol so the result would be 6 (+) signs.
View 5 Replies View RelatedI need to convert the following into radians:
65 feet/1 second * 12 inches/1 foot * 1 Radian/8 inches
I know the answer which should be 97.5 radians. It's just getting the right formula in Excel.
I have a .csv file with measurements. I can open it in excel, and have succeeded in make 3 separate columns from it and save as an .xlsx file. But the problem is I still can't do calculations with the data. it are all values from a form like "-3.44e-07" but excel recognizes this as text. I don't have a green triangle in the corner and multiplying by 1 doesn't work.
Apparently i can use them as numeric values in MATLAB, but I don't know how to do this in excel. And I have 9 files like this, each containing 3 columns and 600 rows, so changing all the cells one by one is no option.
I use the dutch language version of excel so I hope I translate the specific names of things in excel correctly.
I'm an excel novice. I am trying to create a chart that assigns a range of foot measurements to each shoe size, but the data I am working with has only one measurement for each shoe size. Example: The data I have says:
size 7 = 250mm
size 7.5 = 255 mm
size 8 = 260 mm
So I want to create a formula, so the chart reads something like:
size 7 = 247.5mm - 252.5mm
size 7.5 = 252.5mm - 257.5mm
size 8 = 257.5mm - 262.5mm
I'm using ms excel 2003 on windows vista
I would like to use Excel as a measurement device. I have an inexpensive digital microscope that will store sequentially numbered pictures at the click of a button. I am then going to import the most recent picture into Excel and place a grid of transparent rectangles over the picture to serve as my ruler. Would it be possible to continuous update the Excel workbook with the output from the digital microscope?
View 7 Replies View RelatedThis is an example of my data, lets say they are heights of trees. The number is the tree individual, t2 is the age of the tree, height_t2 is the height of the tree at the age t2, and t_ current is the age of the tree individual at present/current. I would like a formula for the t_current column that will pick out the current age of the tree individual and apply it to the age years previous. i.e the t_current age should be repeated for each height measurement for that tree individual, i have filled it in as an example.
Numbert2(age)Height_t2t_current
11236
12486
13706
14836
15926
161006
21286
[code]....
I am needing so I did it as a picture. (Please assume "Day 1" is A1)
View 7 Replies View RelatedI use an excel spreadsheet alot for billing in the construction industry. There are premade formulas in this spreadsheet. When no input value is present, the total column(s) either show a "$0.00" or show "#DIV/0!". How do I hide these results for the rows that do not yet have any input? I have seen it done on other speadsheets
View 3 Replies View RelatedI need to display the currency symbols for all European & Asia Pacific countries. The only ones available that I could find in excel help are , , . Does anyone know if there are more available? This seems limiting.
View 9 Replies View RelatedI have lists of phone numbers with parenthases and hyphens. like (555) 333-4444
I would like to remove all symbols and leave just the numbers.
I would alsolike to add the number 1 in the first position.
so (555)333-4444 would end up 15553334444
is there a way to use the "1/4" symbol as 0.25 in a calculation?
View 9 Replies View RelatedI've got a workbook with multiple formulas e.g.:
t=S/D
TCh=Ch*(S^2/2D)*(D/Q)
TC=Co*(D/Q)+Ch*((i-D)/2i)*Q
which are built by implementing the symbols:
t, S, D, TCh, Ch, Q, TC, Co, i
I'd like to substitute the symbols in following sequence:
t = a
S = b
D = c
TCh = d
Ch = e
Q = f
TC = g
Co = h
i = x
Questions:
1) Which formula could substitute the symbols automaticly?
2) If there are up to 100 formulas in the workbook in the range of A1:E100,-
would it be possible to to set the substitution for the mentioned range?
See the attachment.
I have a column with e mail addresses that all have > < this symbols in the beginning and at the end, how can I remove them from the column?
example
<Ana.Gomez@taca.com>
Im looking for a formula to count different symbols in a row. I am using =COUNTIF(A1:A1600,CHAR(251)) to count 1 symbol and =COUNTIF(A1:A1600,CHAR(252)) to count another. what i need is a formula to count all symbols no matter what they are. As in this case they will only be the 251 + 252 a formula just for that would be great.
View 4 Replies View RelatedI have a worksheet with what appears to be symbols or text boxes; squares, some with a check mark in them, some without. cannot select any of them to edit or delete them, I can type in the cell behind the symbol, the symbol hides the text. I can copy and paste them, but not delete them. how to identify them to edit and/or delete them. Password protection and all cells are unlocked as well. I have stumped as well as other forums.
View 4 Replies View RelatedCan i find a list anywhere of the new Excel 2007 ALT numbers to give the symbols eg Alt0186 = the degrees symbol in 03 but doesnt work in 07?
View 10 Replies View RelatedI need to delete cells that contain certain characters (symbols) and space. Say I have some columns/rows like -
Column 1 Column 2 Column 3 Column 4 Column 5 Text Box Text Box Power Power Place Nice Nice.Plus Jump Jump Over High (Jump) Car Black Car Green.Car Car's Color Cars Blue Color Green Red (Color) Black White
And now I need to have cell without those contain symbols or space or character like -
Column 1 Column 2 Column 3 Column 4 Column 5 Text Box
Power
Nice
Jump
[Code]....
VBA code for inserting "X" for wrong and Tick mark symbol for completed items.
View 5 Replies View RelatedI am importing content control information in a word file into excel by using a macro in excel. The information is coming across nicely but when the information about a checkbox comes across, in excel, that's what you see, a checkbox (☐ or ☒). Is there any way (formula or vba) to replace all the checkboxes with a yes or a no?
I wrote a formula that works:
Code:
=IF(G8="☒","YeS","nO")
But this will add this information to a new column and I would like to replace the information in the existing column (the form has about 200 checkboxes) and I don't want to add a bunch of new columns.
I also toyed with VBA:
Code:
Range("G1:G100").Replace "&", "No"
But when I try to paste the ☐ in the vba code, I get a "?" so I am assuming it doesn't recognize the ☐ as a valid character.
This is my qns
cell A1 having <txt>NEWM</txt>
cell A2 having <txt>RSQ</txt>
I need to display NEWM in B1 and RSQ in B2....
I have a spreadsheet that creates a named file using data entered into a field. For a hypothetical example, people can put their favorite car in A2 and, when the macro is run, it will SAVE AS the spreadsheet and name it with the value of A2. Problem is, some folks don't follow instructions and do things like HONDA / INSIGHT, or else something using symbols that are not valid for file names.
I know there are lots of ways to use Data Validation to prevent certain entries, but is there any way to prevent certain symbols? If not, can anyone help me with an Event Handler that would evaluate the data for certain symbols once the data is entered?
I have created a survey on excel. When completing the survey, the customer will have to place an "X" in the appropriate column (very satisfied, satisfied, dissatisfied, etc.) Is there a formula in excel that will allow me to add the number of responses ("X's") for Very Satisfied, Satisfied, etc.???
Could anyone guide me how to express symbols & signs in VBA , LIKE ....
View 6 Replies View Relatedsome times we use numeric symbols with formulas such as subtotal(109,a1:a100)
109 here meaning the visible cells only. well, Iwant to know if other numeric symbols also used in formulas !
I am trying to write some code that will repair errors in a standard workbook. One of the errors is a blank cell that needs to be changed to "325F T 350F". How do I insert these symbols/operators into the VBA code?
View 6 Replies View RelatedI use dot symbols in one column of my spreadsheet to call attention to a particular row. I am currently using ASCII(decimal) Char 149 and I count the column of dots with the following formula: =COUNTIF(A1:A20,CHAR(149))
This works fine, however, ASCII(decimal) Char 149 is a very small dot which is hard to see. I have found a much larger dot which is identified as BlackCircle Unicode(hex) 25CF. From an appearance standpoint the BlackCircle is much larger and much easier to see, however, I have been unable to construct a formula which will count the dots. How do I identify BlackCircle Unicode(hex) 25CF in order to count the character using the formula listed below: =COUNTIF(A165:A184,CHAR(25CF))
Counting with text and symbols mixed in. This is what I'm wanting to do:
For example:
I've got a column with numbers. some of the numbers have the following signs/symbols proceeding the value in the same cell: ',ft,#,ea,each. I want to have these removed by a formula so that the numerical values are alone.
View 3 Replies View Related