Copy And Paste Value Only Using Keyboard?
Feb 25, 2013is there any way to copy and paste "value only" using keyboard? Ctrl+V is pasting everything. i want existing format to remain the same and using mouse is taking lot of time :
View 4 Repliesis there any way to copy and paste "value only" using keyboard? Ctrl+V is pasting everything. i want existing format to remain the same and using mouse is taking lot of time :
View 4 RepliesNeed keyboard shortcut for 'Paste Special'
View 9 Replies View RelatedIs there a short- cut key sequence for paste special value short of: Alt+E+S+V
or
Writing a subroutine in Personal.xls and giving it a shortcut key like:
Sub PasteValues ()
Selection.Formula=Selection.Value
End Sub
I have written a short VBA code to create a Paste Special values keyboard shortcut.
Is there a way or a place that I can put this code so that every time I open any workbook in Excel, or open Excel itself that this VBA code will be active and I can use the keyboard shortcut?
Is there someone who know the keybord shortscuts for copy a cell formula, whithout using mouse. Like this: A1: =VLOOKUP(I2;A:A;1;FALSE)
Then copy the cell formula to the end of the sheet:
A2:=VLOOKUP(I3;A:A;1;FALSE)
A3:=VLOOKUP(I4;A:A;1;FALSE)
A4: =VLOOKUP(I5;A:A;1;FALSE)
With the keybord.
I'm looking at [URL] which gives a lot of keyboard shortcuts, but not specifically what I'm looking for.
It's a basic function, I'm surprised it's not listed. I just want to copy the value of a selected cell via keyboard shortcut (for copy and paste purposes). I don't want the formula, just the value. If it were just text I would typically do CTRL-C and CTRL-V to paste like everyone does 1000 times a day, but in this case it's copying between two otherwise totally unrelated spreadsheets, so having the formula is irrelevant and produces undesired results. I just need the value of the formula.
Is there a keyboard shortcut for "copy value"?
I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
I've received an Excel file with the below macro. However, I've made changes in the original file and therefore, the macro isn't working anymore except if I copy paste special the value instead of simply copying it. I would need to change the macro accordingly.
The macro is the following :
Sub CCtosheetwithoutformat()
'
' CCtosheetwithoutformat Macro
[Code]....
I've programmed in many different forms of BASIC in my days, but I'm having too much trouble with VBA, and can't figure out if it's me or if it's the version of Excel I'm using (2002). I wrote a program in Excel, where if certain cells contain values other cell's calculations will become active. I want to click on a button that I created on the spreadsheet, then be able to select different keyboard strokes to activate these cells. I understand that there are 3 event codes that circle around this concept and that is KeyDown, KeyUp and KeyPress. Whenever I type in what MS Help told me to type in for these events, it always returns a runtime error.
View 9 Replies View RelatedDoes anyone know if there is anyway that we can command Excel to avoid accepting aNY KEYBOARD ENTRIES? what intend to do is restrict a certain region on a worksheet for Users not to be able to type anything but but there are commandbuttons on the header which use: Range("C65536").End(xlUp)(2, 1) = "Value for the last cell" code to get the input into the cell. The purpose is to make use of the cmdbuttons with mouse but the data notto be keyed in !!!
View 2 Replies View RelatedI currently have a macro that outputs data to a bulletin-board type table in my worksheet. At the moment, what happens is that the macro copies the entire table down one row using copy/paste, then prints a new line of data to the top row of the table.
This works great because it is very fast and because I only have to format each line once--the formats just get copied down every time a new line of data is added.
My problem is that while this program is running, I am unable to use copy and paste in windows, because the copy/pasting from the macro overwrites the windows clipboard.
Is there a way for me to "copy" formats from 1 range to another range of equal size without actually using copy/paste? I know this can be done with values (eg. range("B2:B4").value = range("A2:A4").value), but I can't get it to work with any sort of formatting.
I've run into a problem and I cannot resolve. I am designing an Excel Application in VBA. During the execution of the VBA code, the user will press different keys on the keyboard. These keystrokes are determined by using the GetAsyncKeyState Function. The problem happens when I exit from the VBA code and move back to a worksheet outside the code execution.
Lets say a user has pressed the 'Q' and 'X' key just prior to the final VBA subroutine running and releasing the worksheets back to the user. On the worksheet, in the selected cell will appear the 'Q' and 'X'. For some reason these keystrokes are not 'flushed' from the keyboard buffer prior to the code completion and are being transfered to the active worksheet. This is really annoying if I am testing the code in the VBA editor, because the spurious keystrokes will be placed in my VBA code, causing me to search for the out of place characters.
keyboard shortcut to insert a row.
View 9 Replies View RelatedMy ENTER button in my keyboard does not work.
I think it is because I have disable it.
does anybody know hot to enableit?
kind of:
Application.OnKey "^"
but don't know which one!
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View RelatedSome expert users can unhide a sheet in a worksheet which is protected by password. But I don't want to place a button in the worksheet for everyone to see and wonder what it's for. I can record a macro and assign a keyboard shortcut but I can't do it it with existing macros ?
View 3 Replies View RelatedI would like to be able to check a checkbox on a userform with a keyboard stroke rather than using the mouse. Any key will do, "P" or Enter would be prefered. It would make data entry much easier.
View 4 Replies View RelatedI have been working on a workbook, and all of a sudden, my keyboard no longer worked in Excel. No shortcuts, no CTRL+C, no CTRL+V, no CTRL+S, no CTRL+A, no F12 to save, no letters, no numbers.... The only button that is working is my ALT key, and I use the other letter keys just fine to navigate after pressing ALT.... But that's it!
I have still been able to work on it because I can still write in Word, and I can still write more code in the Visual Basic window, and I can still click the buttons I create under the Developer... but it's still frustrating to not be able to type a thing in any of the cells, formula bar, or be able to use any of the shortcuts. And now when I tried to close it, I can still select everything else, and I can close this workbook, but it won't close Excel.
I would like to use Shapes in excel, instead using userform as the code below.In this userform, it has command buttons for the numbers and the a text box to show the numbers.How can I do it, using square shapes for numbers and another rectangle shape, to show the written numbers.I would like to create a number keyboard using "shapes".
[Code]....
My macro essentially requires a deletion of the entire sheet, so I cannot run it through a button, it'd by definition be deleted. So I was thinking to run this macro through the keyboard, how to assign a keyboard key to existing macro?
View 4 Replies View Related