I frequently have to copy information from one excel sheet and paste it into another. But when I do this the formatting doesn't carry over. So I have to go to each individual cell that I pasted into and adjust the size of it. How do I copy and paste so that the formatting/cell size is preserved?
View 4 Replies
I'm trying to copy large amounts of data yet excel keeps posting the error message,
View 3 Replies View RelatedI'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
I am new to Excel VBA - Normally, If u move your cursors to the corner of your userform,we will see the single-two pointed arrow pop-out and then we can adjust our own desired size of the user-form.
How to do that in EXCEL VBA?
Is there a way to adjust the font size in a comment. The default seems way to small. All thoughts on the subject .
View 4 Replies View RelatedI would like excel to adjust to a certain size when the program is opened using vba. Not to equal the computer monitor size but only the size i choose (as it is almost square).
View 3 Replies View RelatedI'm trying to paste the column that my code found into the blank cell C18, which may change in the future, but I got an error that I need to select the cell to paste the column to - I'm not getting the code right. Here's what I've tried:
For Each Cell In Sheets("Total Sell Dollars").Range("1:1")
If Cell.Value Like "2014*" Then
BlankRow = Sheets("Total Sell Dollars").Range("C" & Rows.Count).End(xlUp)
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
Sheets("Total Sell Dollars").Select
End If
Next
When I run this:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
line gets highlighted and it says:
"Run Time error '424': Object Required"
This is the code that I tried when I got the paste error:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1)
and the error was: Run-time error '1004'
We can't paste because the Copy area and paste area aren't the same size.
Try one of the following:
Click one cell, then paste.
Select a rectangle that's the same size, then paste.
Once I paste the column that excel found, I want to go to the next column and paste the found column into the cell C19 - which may change in the future and so on until all the found columns with 2014 in them are pasted.
I have a matrix that calculate lenght of the sides in a triangle, this is for the purpose of a camera and the pixelsize/inchsize.
Is it possible to create a chart that will give the user an visual control on how the cameras detection area looks like?
I'm using Excel 2013 on Windows 7.
I have an Excel file which has a macro that sucks in data from a number of separate files (two Excel, a varying number of csv). The macro grabs all the individual files and loads them into one of three worksheets with some formatting, sorting, and structuring on the way. All good so far.
I then need to take two of the worksheets and copy them to a new Workbook which I can send out to some users. So I use the Workbooks.Add method, and use the Selection.Copy on just the data (UsedRange.Rows/Columns.Count to ensure it is only the data) and Selection.PasteSpecial with the xlPasteColumnWidths, xlPasteValues, and xlPasteFormats options to copy the data over. None of the data is filtered. Just straight data.
I would expect the newly added workbook to be smaller than the one with the macros because the one with the macros has two extra sheets that I don't transfer, and the sheets I do transfer are identical.
And that's where it gets weird. The file with the macros and more data is 18.7Mb, but the new one with only two sheets is 24.8Mb. One is .xlsm and the other is .xlsx (because it has no macros).
I've tried opening the new workbook and saving as .xlsm (no material difference to the size) and as .xls (it got even bigger). I've opened the new workbook, gone to the end of the data and deleted all the blank rows and columns, but no effect (because the rows are already empty).
Why would the file with less in it be so much bigger (or bigger at all)?
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
what is wrong in this code, it does not paste.
HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
I have a working macro where I use a Forms Command Button w/ a Macro that copy/paste specific variables and range in the workbook to a pre-defined PowerPoint template file (in the same directory as the workbook file). See code below: Questions:
1) Is there a better script to reference a value in a cell value in Excel and Paste in PPT template?
2) Is there away to auto scale the copy range from Excel to PPt? Curently I have to manually adjust the height/width parameters.
I want to concatenate two Cells into a single cell BUT have the first field left justified and the second cell right adjusted.
A1 = "John Williams", A2= "Single"
A3 = "John Williams Single"
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedHow do I Copy and paste from one cell to another cell but without replace the data? So keep all the data both data in the second cell.
View 8 Replies View RelatedI have a constantly updated cell (A1) where I log the amount of customer products. I have a sheet where I log the payments on a monthly basis from these customers. What I want to acheive is when I enter the date the money was received in 'B1' for 'C1' to look to 'A1' and paste that value (let's say 29). Then in the next month this number could have gone up to 31, so, when I then enter the date of money received in 'B2', 'C2' will look to 'A1' and paste '31' and so on.
View 4 Replies View Relatedi have this data ( Device:[Hc1 3300 Trunk1] P776 - Mecca Cash Out) in cell d3, what i need is my macro to refer to that cell and bring back the text after the dash and paste to another cell.
For example, if it had that text in d3 then the macro runs it puts just Mecca Cash Out in D2.
i have 2 sheets.
i want to copy 3 cell values from sheet1 to one cell in sheet2.
what exactly i need:
From sheet1 - value of cell AI4,AK4,AU4
To sheet2 - in cells A5 to An(n cells)
and an "-" inbetween AK4 and AUK
example output:
F12345-01
F from AI4
12345 from AK4
01 from AU4
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View RelatedIn a column, there are data, but in between of each data in a column, there are many blank cells. I would like to do a copy and paste of the first data, and paste it in the same column column, while the cells are blank, and stops when there is a cell with a data, which is different than the previous one, and do the same again and again.
View 4 Replies View RelatedI am trying to copy the the following from MS Word and paste it in one MS Excel cell:
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
I have a spreadsheet with two tabs Line Crew and Master Log. I have a macro that searches the Master Log Column H for a value "Line Crew" and if it finds it, it will copy that row (Specified range) to the Line Crew tab. My problem with the macro is that it keeps copying the same row. I would like it to move down to the next row search for "Line Crew" , copy and paste until it gets to the end of Master Log Sheet. I have attached a sample of the spreadsheet. Here is my code:
[Code] ..........
Attached File : Book1.xlsm
I am very new to VBA and am trying to make a spreadsheet that has a data page and page 1. I would like the row from the data page to copy and paste into page 1 if column A=07-01 Carbonated Soft Drinks . Here is an example of the sheet. I usually use formulas for my spreadsheets and just could not find one for this.
View 2 Replies View RelatedThe following code is intended to copy and paste the value from cell I2 to the first unused cell in column K. There is is header in cell K1. It works fine if there is a value in K2 or K3, etc., however, if K2 is blank (all cells beyond K1 are blank) I get an error 400 when I run the sub.
View 14 Replies View RelatedI'm have never learnt VB before and would like to try to write one to perform the following: If the next cell isempty, go to the last cell, copy it and paste into the empty cell; Else if the cell is not empty, go to next line and repeat the procedures until reach row =10000
.(BEFORE)
Row 1:Product A
Row 2:
Row 3:
Row 4:
Row 5:Product B
Row 7:
Row 8:
Row 9:......
Tried all day to find a way of selecting text ( from several cells) on one sheet and then having it pasted into the textbox on another sheet. I did originally paste the text to a cell but it makes the row's vary in size depending on the copied text and gets a bit annoying. Seems to be This is the paste to Cell code
View 4 Replies View RelatedI have a column in excel and I want to evaluate each cell in that column and if the cell.value = a specified value I would like for it to copy and paste it in the cell to the left. Below is the code I am using but it isn't working.
View 2 Replies View RelatedI am looking for a macro that will open a file called File1.xls highlight only the cells in columns A:B that have content, then toggle back to another file called File2.xls, scan columns A:B, find the next blank cells within A:B and paste.
Here is a sample of what i am looking for:
Macro to scan File1.xls and find & copy only cells in columns A:B that are not blank.
File1.xls
_|__A_ |__B_|
1|_text|_text| (Copy)
2|_text|_text| (Copy)
3|_text|_text| (Copy)
4|_text|_text| (Copy)
5|blank|blank| (DO NOT Copy)
Toggle to File2.xls, scan columns A:B, paste content copied cells from File1.xls in next blank cells in columns A:B of File2.xls.
File2.xls
_|__A_ |__B_|
1|_text|_text| (Pre-existing text)
2|_text|_text| (Pre-existing text)
3|blank|blank| (Paste Row1 from File1.xls)
4|blank|blank| (Paste Row2 from File1.xls)
5|blank|blank| (Paste Row3 from File1.xls)
6|blank|blank| (Paste Row4 from File1.xls)
