i have this data ( Device:[Hc1 3300 Trunk1] P776 - Mecca Cash Out) in cell d3, what i need is my macro to refer to that cell and bring back the text after the dash and paste to another cell.
For example, if it had that text in d3 then the macro runs it puts just Mecca Cash Out in D2.
what is wrong in this code, it does not paste.
HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedHow do I Copy and paste from one cell to another cell but without replace the data? So keep all the data both data in the second cell.
View 8 Replies View RelatedI have a constantly updated cell (A1) where I log the amount of customer products. I have a sheet where I log the payments on a monthly basis from these customers. What I want to acheive is when I enter the date the money was received in 'B1' for 'C1' to look to 'A1' and paste that value (let's say 29). Then in the next month this number could have gone up to 31, so, when I then enter the date of money received in 'B2', 'C2' will look to 'A1' and paste '31' and so on.
View 4 Replies View Relatedi have 2 sheets.
i want to copy 3 cell values from sheet1 to one cell in sheet2.
what exactly i need:
From sheet1 - value of cell AI4,AK4,AU4
To sheet2 - in cells A5 to An(n cells)
and an "-" inbetween AK4 and AUK
example output:
F12345-01
F from AI4
12345 from AK4
01 from AU4
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View RelatedIn a column, there are data, but in between of each data in a column, there are many blank cells. I would like to do a copy and paste of the first data, and paste it in the same column column, while the cells are blank, and stops when there is a cell with a data, which is different than the previous one, and do the same again and again.
View 4 Replies View RelatedI am trying to copy the the following from MS Word and paste it in one MS Excel cell:
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
This is just a test.
I'm trying to copy large amounts of data yet excel keeps posting the error message,
View 3 Replies View RelatedI have a spreadsheet with two tabs Line Crew and Master Log. I have a macro that searches the Master Log Column H for a value "Line Crew" and if it finds it, it will copy that row (Specified range) to the Line Crew tab. My problem with the macro is that it keeps copying the same row. I would like it to move down to the next row search for "Line Crew" , copy and paste until it gets to the end of Master Log Sheet. I have attached a sample of the spreadsheet. Here is my code:
[Code] ..........
Attached File : Book1.xlsm
I am very new to VBA and am trying to make a spreadsheet that has a data page and page 1. I would like the row from the data page to copy and paste into page 1 if column A=07-01 Carbonated Soft Drinks . Here is an example of the sheet. I usually use formulas for my spreadsheets and just could not find one for this.
View 2 Replies View RelatedThe following code is intended to copy and paste the value from cell I2 to the first unused cell in column K. There is is header in cell K1. It works fine if there is a value in K2 or K3, etc., however, if K2 is blank (all cells beyond K1 are blank) I get an error 400 when I run the sub.
View 14 Replies View RelatedI'm have never learnt VB before and would like to try to write one to perform the following: If the next cell isempty, go to the last cell, copy it and paste into the empty cell; Else if the cell is not empty, go to next line and repeat the procedures until reach row =10000
.(BEFORE)
Row 1:Product A
Row 2:
Row 3:
Row 4:
Row 5:Product B
Row 7:
Row 8:
Row 9:......
Tried all day to find a way of selecting text ( from several cells) on one sheet and then having it pasted into the textbox on another sheet. I did originally paste the text to a cell but it makes the row's vary in size depending on the copied text and gets a bit annoying. Seems to be This is the paste to Cell code
View 4 Replies View RelatedI have a column in excel and I want to evaluate each cell in that column and if the cell.value = a specified value I would like for it to copy and paste it in the cell to the left. Below is the code I am using but it isn't working.
View 2 Replies View RelatedI am looking for a macro that will open a file called File1.xls highlight only the cells in columns A:B that have content, then toggle back to another file called File2.xls, scan columns A:B, find the next blank cells within A:B and paste.
Here is a sample of what i am looking for:
Macro to scan File1.xls and find & copy only cells in columns A:B that are not blank.
File1.xls
_|__A_ |__B_|
1|_text|_text| (Copy)
2|_text|_text| (Copy)
3|_text|_text| (Copy)
4|_text|_text| (Copy)
5|blank|blank| (DO NOT Copy)
Toggle to File2.xls, scan columns A:B, paste content copied cells from File1.xls in next blank cells in columns A:B of File2.xls.
File2.xls
_|__A_ |__B_|
1|_text|_text| (Pre-existing text)
2|_text|_text| (Pre-existing text)
3|blank|blank| (Paste Row1 from File1.xls)
4|blank|blank| (Paste Row2 from File1.xls)
5|blank|blank| (Paste Row3 from File1.xls)
6|blank|blank| (Paste Row4 from File1.xls)
I am trying to build a VBA macro to accomplish some copy pasting work.
I have some letter written in a cell under a percentage, I would like to move the letter next to the % number.
Something like:
Original
Cell - B2 - 14.5%
Cell - B3 - aD
New
Cell - B2 - 14.5% aD
Now, not all %s will have letters in the cell underneath them, thus the above should only be done if there is a letter.
I have a Worksheet that is manually populated with file names into the 2nd cell of each column for columns A through D.
I need a macro that will loop through each column, starting at B2, c2 etc, and copy each value, and then paste it into the first available blank cell in column E
Before
YesterdayToday10108595101085661010859510110182
After
ALL10108595101085661010859510110182
Ive tried a few combinations of code, but nothing seems to be working.
I created the following code to copy the contents of b6 down. However, I need to modify the code to copy this formula =IF(M6=calculations!$E$34, N(B5)+1,N(B5)) down the range.
Sub copyformulas()
'copy and paste cells with formulas down. Select B6 throubh AH6 and copy the formulas down to the last employee ID.
Dim lr As Long
For Each SheetName In Array("All employees annualized", "All employee salary", "All employee hourly", "allmaleee", "allfemaleee", "cohort analysis", "minority", "nonminority")
With Worksheets(SheetName)
lr = .Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
.Range("b6:b").AutoFill Destination:=.Range("b6:b" & lr)
End With
end sub
I have data in Excel like below in excel sheet Need To copy and Paste each ROW
Need to Paste Each ROW in new sheet1,sheet2,sheet3. one by one.
A B C D E
1 Sri 89 H6 YES No
2 Pri 90 K1 No Yes
3 Lio 87 G5 No Yes
Need to copy above data In new file new Sheet need to paste in Particular Cell like below.
A1 Data in C2
B1 Data in D2
C1 Data in E2
D1 Data in F2
E1 Data in C4
I have the following bit of VBA code which copies a particular cell and pastes it in the next available cell in column "AD", but I need to paste it as a value. How do I incorporate this into the code?
Sub copypaste()
Worksheets("USD IR Swap 10 Yr").Range("L5").Copy _
Destination:=Worksheets("USD IR Swap 10 Yr").Cells(Worksheets("USD IR Swap 10 Yr")
.Rows.Count, "AD").End(xlUp).Offset(1, 0)
End Sub
I want to change arrangements of cell by using macro
A
B
C
1
Code
C1
C2
2
Dr2890
2150
2670
[Code] .........
If a cell contains the formula =b1 and the result shows as zero;
Is there any way of getting the text "=b1" in a cell next to it instead of zero?
If I have a cell lets say A1 with a formula in it say "=A2" how do I copy A1 into A3 so that A3 will contain the text =A2 (and not the formula)?
I have a live stock quote that refreshs every second (for reference, Sheet1A4), I would like to paste value A4 into next available row on sheet2 of the same workbook.
If possible, I would like to be able to copy several cells on Sheet1 and paste them in various sheets within the same workbook. Can you help me out or point me in the right direction to a previous thread.
i pull the formula of o21 to o22
o21 has formula =IF(J21>=U21,1,"")
022 has formula =IF(J22>=U22,1,"")
and basically u21 and u22 are "=s20"
so may i know what formula i should use to simplify o21 and o22 so that i do not need to use u21 and u22
i cant use =IF(J21>=U$21,1,"") because if i copy this formula and paste to other cell, it will always refer to U$21...