what is wrong in this code, it does not paste.
HTML
Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
I use few cells with formula and I would need when I click on the cell to run a macro that would copy the selected cell and do a paste value.
View 2 Replies View Relatedhave two worksheets, "Entry form" and "Database" in my workbook. I am trying to put together a macro button to find the cell value D5(Entry form) in the column A:A (database), if found, copy selected cells (B5:D5,B7,B9) from entry form and paste in the adjacent cells of the row with the value in the database sheet.
VB:
'Match value D3 and replace data
Dim sht As Worksheet, outsht As Worksheet, r As Long
Dim rfoundCell As Range
[Code].....
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
I have a macro that loops through several workbooks and copies data to one common sheet. Works great with one flaw that I have not been able to resolve. I am using the End Property example below, this works great as long as there are more than one cell with data. With one cell having data this takes you to the bottom of the sheet.
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Need code to select from a specific cell to the last cell in that column with data where when the selected cell is the only one with data that would be the only cell selected.
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedI need to copy Invoice id from Column B to Column A, firstly it would be to the cell one down and one across, ie data from B3 is copied to A4. I then need to continue to copy this data down in column A but only while there is a date in column B.
View 7 Replies View RelatedI have a workbook that I have set up some VBA code so that when it opens I have a box ask, "View Data" or "Start New Audit." When the user clicks "Start New Audit" Excel creates a new sheet, names it based on the current date (in yyyymmdd format), and copies a range from a sheet called "Master Sheet" to this new sheet. These new sheets are for users to input data on a daily basis. As that data is typed in, there are four different columns that have an average function at the bottom. I need the result of that average function to be sent to another pre-existing sheet on the next empty row so that I can create a chart out of it.
View 4 Replies View RelatedI have the price of S&P 500 in the L2 until L145 column.
And I would like to past each cell (L2, then L3, then L4....until L145) 220 times in column F.
As follow
L :
1780
1715
1680
.........(144 value)
TO column F
F:
1780
1780
1780
.........(220times)
1715
1715
1715
.........(220times)
1680
1680
1680
........(220times)
I want the VB Code to do the following;
For each row in Column C, if the text starts with "Calls from service no", it must extract the last word and paste it into corresponding row in Column A. So if the macro finds a cell in Column C starting with "Calls from service no..", then the last word (the last word will always be a number and is seperated with a space) of this cell must be pasted in cell A45. So it must continue for all occurances in Column C. Sample of text in cell = "Calls from service no 0431324345" and "Calls from service no 3242134254" etc.
I also require similar, but this time it must extract as shown below.
If text is found in Column C starting with "Local" or starting with "Long Distance" or starting with "Mobile", only this text, ie "Local" or "Long Distance" or "Mobile" must be pasted in Column B.
It can be 2 different macros that I can run.
I need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.
View 5 Replies View RelatedI am using Excel 2007. I have a worksheet called January and I have a range of formatted cells in 'January' between B15:18 and BA15:18. Some contain formulas, others are just formated to size and or color. I want to copy and paste this range of cells (B15:18:BA15:18) to the next available unformatted or blank cell of the column of the same worksheet by pressing a button. I also need the newly pasted range to reset to their original formatting assuming data was entered before the button was pressed.
View 5 Replies View RelatedI type all the information into the Workbook called 'Form' in ' Sheet 1' and i need it to also transfer into the workbook named 'Master' in sheet 'August 08'
For Instance.
It needs to copy Cell C4 from Sheet1 in Form and paste into the next empty cell in column A in August 08 in Master.
All comments/improvements would be much appreciated as the macro I attempted to create solely didnt work at all.
I am making a worksheet that I intend to use to track my money. When I first open the worksheet, it opens on a tab where I can click a button to report a type of transaction. For example, if I make a withdrawl from the bank for $50, I click the button, it takes me to the sheet that tracks my bank-related stuff, selects a cell and opens up a form, at which point I type in what the transaction consisted of. However, the sheet also tracks what is in my wallet, so I'd like to finish reporting the bank transaction in the form, and have a button to click that reports the wallet part automatically.
So, essentially what I need to do is select several non-contiguous cells that are in the last row of the bank sheet, copy them, switch to the wallet-tracking sheet, and paste them in a row that is one past the last row of that sheet. The paste should keep the cells next to each other, even if they were non-contiguous when they were being copied.
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.
Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
I want to copy a cell from a column and paste it to next column and up one row. My current data looks like this:
DATA
1234
I want to make it look like: DATA 1234
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx‎
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
The macro below is stored within worksheet "Data Lookup". When the value in B1 changes, the code is executed but fails when it comes to the paste function. I get a "Object doesn't support this property or method".
Also, it appears the copying is not occuring correctly. It is supposed to copy from the Data3 worksheet but, in fact, its copying from the Data Lookup worksheet. Does storing this macro within a worksheet prevent the macro from moving between sheets?
Sub Worksheet_Calculate()
If Range("B1").Value = Range("N1").Value Then End
Sheets("Data3").Select
Cells(13, 6).Copy
Sheets("Data Lookup").Select
Cells(23, 11).Paste
End Sub
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I was asked about if i can copy defined cells when i checked its checkbox by using vba button , and another button in another book to paste those cells .
Mention that i may select more than one checkbox in copying and when i would paste these checkboxes , they would be in queue.
I am using vlookup to get some data from one shhet in my workbook onto the front sheet
so I have a search box and the vlookup duly does as it should and gets me the data into E28:E100 and fills the cells to the right with corresponding data for each item
Now I select any cell from the first column of the search results I want and it gets pasted into the next empty cell range C4:C22 all this works a treat thanks to lots of help from mr excel. What I want to do (without any more vlookups) is pick up the corresponding cells to the right of the selected cell and paste them into the cells to the right of the pasted cell. I cant do it all at once because there is a different amount of columns between the select area and the paste area... hope this is clear
here is a snippet of code that lets me choose the cell to paste
Dim UserResponse as range
'InputBox to Ask the user to select the cell they want copying
'First direct them to the start cell in the column they are picking from
Range("E28").Select
On Error Resume Next
Set userResponse = Application.InputBox("Choose from List Below", Default:=Selection.Address, Type:=8)
On Error GoTo 0
If userResponse Is Nothing Then
End
Else
userResponse.Copy
(here I want to get the address of the cell into store so I can pick up the addresss of 2 cells to the right of it ie selected cell is E54 and I want to copy that and G54 and N24 and paste them into C8 D8 and F8 repectively)
End If
I have a macro that will go through a set of numbers and check them against a condition. if the cell complies with the condition i want to copy the entire row to a new sheet. sofar I have tried the following to select the current row but to no avail.
View 4 Replies View RelatedI have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View RelatedIm looking for a macro that can get a cell RANGE, the data in the RANGE will be copied then if the checkbox is selected it will copy the same data in the RANGE and add the selected checkbox in next column
I have column A and Column B < this is my selected range
Capture1.PNG
I will have a form that has checkbox and buton.
When all the checkbox is selected. when the button is click. the result will be.
I have a sheet that has columns from A to BS, and the column headers start in Row two.
I need to 1st filter the data by Column E where the data in Column E should not contain a particular Value, like"Sleeve".
Then it needs to copy the Columns A,D,G, BN, BO, BP,BP,BR & BS.
And it needs to delete Rows 3 & 4 from the current sheet, before pasting it in a new sheet.
And at the bottom of the sheet it needs to give me a count of the rows and the month end date for each month.
