ws5 and ws7 are defined and working due to other parts of the code already using them. ive copied the syntax from some of my other copy destination codes the only difference here is instead of ("A2:J10") ive got "(Cells(2,1):Cells(iRow, 10)" as the row number for this is variable, and it is calculating the correct value for iRow and iRow2. its probably something stupid im missing but i cant figure it.
View 7 RepliesI am copying a WorkSheet and I want to set it directly to an Object. I don't want to use the activeWorksheet. I does work like this with .add so my idea was it should work with copy too.
[Code] .....
It does Copy the Worksheet, but afterwards VBA gets error 424
SO how do I set a Workbook.copy ?
The macro below is stored within worksheet "Data Lookup". When the value in B1 changes, the code is executed but fails when it comes to the paste function. I get a "Object doesn't support this property or method".
Also, it appears the copying is not occuring correctly. It is supposed to copy from the Data3 worksheet but, in fact, its copying from the Data Lookup worksheet. Does storing this macro within a worksheet prevent the macro from moving between sheets?
Sub Worksheet_Calculate()
If Range("B1").Value = Range("N1").Value Then End
Sheets("Data3").Select
Cells(13, 6).Copy
Sheets("Data Lookup").Select
Cells(23, 11).Paste
End Sub
I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
I want to fill all a column bottom-up but without specify cells in format "A1500:A2" like
VB:
Range("H1578").Select
Selection.AutoFill Destination:=Range("H2:H1578")
{H1578 have a formula so...}
I have data in the first 7 columns, with a variable(Range) for the first 5 columns
VB:
Dim oRange As Range
Set oRange = ActiveSheet.Range(ActiveCell.Offset(0, 0), ActiveCell.Offset(89, 4))
{The first cell in it is A1}
My question is : How to fill Range("H2:H1578") using my ''oRange'' variable?
I try with OffSet but my code didn't work. I need to do the same with the 6 columns to the right and then plot in a chart.
I am attempting to create a macro that opens a file named "shrinkage-billing.xls", searches for a variable "PTOSH" in column A, copies the adjacent cell and pastes the data in another worksheet named "Shrinkage Report 2009.xls"
The code follows ...
Since you can copy to someplace with one line of code like this:
Sheets(1).Range("A1:Z5000").Copy Destination:=Sheets(2).Range("A1")
is there any way of doing this with formatting, or are things like paste special features only possible by selecting something?
Ie: Values, column widths, formats, etc. Does the copy destination argument only allow simple copying?
Is there any way to use the formula below and send only the values?
FY07.Copy Destination:=Sheets("Age Roll Up").Range("A1")
I know that I can copy and paste special, but was wondering if I could tweak the above line in any way to?
I have the following code to copy a range to another destination. I would like only the value to go to the destination. How to implement this?
Set rngtocopy = Nothing
On Error Resume Next
Set rngtocopy = Range(rngdata(2, 9), rngdata(lngrows - 2, 9)).SpecialCells(xlCellTypeVisible)
On Error Goto 0
If Not rngtocopy Is Nothing Then
rngtocopy.Copy Destination:=Cells(5, 14 + cc + (t - 1) * 3 + (i - 1) * 17)
whether I can handle errors in a way that tells me which object caused the error?
For example if a userform has two combobox's and one causes an error, can I return to a message box containing the name of the object (combobox1 or combobox2)?
I have tried returning err.source but I am either not using it correctly or it isn't intended to be used this way.
I am having difficulty getting a form to work the way that I would like it to work. I have a form that is used to display questions that my students will be answering. The form also is used to put the answers into a worksheet. I have 2 sheets. Sheet2 has the questions, student answers, and correct answers. Sheet1 is used to indicate correct answers and to keep track of percentage correct. I am fairly new to VB. I have 2 pieces of code that I am going to post. The first one works and the second one doesn't.
This is in the "This Workbook" section and it works.
Option Explicit
Public intNoQ As Integer
Public strNoQ As String
Public NumberofQuestions As Integer
Dim StudentName As String
Dim InputBoxAnswer As String
Public Sub Workbook_Open()
Application.Visible = False 'Hide Excel
Load Questions
Load NumberCorrect
NumberofQuestions = Worksheets("Sheet1").Range("K3").Value
For intNoQ = 1 To NumberofQuestions
strNoQ = VBA.CStr(intNoQ)
If intNoQ = 1 Then
Questions.Controls("QuestionNumberBox").Value = "Question#" & strNoQ
Questions.Controls("QuestionBox").Value = Worksheets("Sheet2").Range("B1").Value
End If
Questions.Controls("CorrectBox" & strNoQ).Visible = True
Questions.Controls("CorrectLabel" & strNoQ).Visible = True
Next intNoQ...............
I am sure this is simple but cant get me head around it (tried paste & paste link).. I am wanting to copy formulas in file (A) to file (B) with data source linked in the file (A).
i want is when i copy the formulas to file (B) sheet 2 and it should retain the original path say H:excelfile A[sheet1]$G$1+....xls and source from which the data is being used.
I have a NAMED RANGE of data consisting of 4 columns and as many rows as is selected. Name it CompTable1.
I loop through all of the 4 columns of data to format it (as shown below). This snippet is for column 1 of CompTable1 (a public variable as string) and I basically have the same situation for each column of 4 but replacing each respective x in cells.(n,X) & offset(0,-x) to take into account of where I wish the data to go as I loop through. Ultimately 4 (For Next) loops.
[Code] ......
The new range with 5 columns is as follows:
Column 1 from CompTable1 = Column 1 of new range
Column 2 of new range is blank for something later
Column 2 from CompTable1 = Column 3 of new range
Column 3 from CompTable1 = Column 4 of new range
Column 4 from CompTable1 is not used in the new range but is formatted
Column 5 of new range is blank for something later
This certainly works very well and with my amateur VBA status am quite proud of how far I have come in a few months. Is it efficient? Is it free of possible errors? Likely not. I wish to rid myself of the "Select" each cell plaque though maybe using a resize, offset or copy destination operation but can't seem to get it working. Once I do get the data in the new range, I format everything without selecting quite well with my methods described above.
I'm currently working on a problem that I'm having with Hyperlinks. Basically I want to copy the destination data that the hyperlink points to onto another sheet.
The main problem I'm having here is that I cant seem to find a suitable method to do this....I had the idea of using the hyperlink.follow function and then copying the data once I'm there and then moving back to the source hyperlink. My only problem with that is that I dont know how to find the cell address that the hyperlink is in, once I have found that hyperlink.
Therefore my question is two-fold:
- Is there a way to copy the destination data using some sort of hyperlink function?
- If not, is there a way to find the cell address within a worksheet, once a hyperlink is found on that worksheet?
I've attached the spreadsheet below to give a better idea of what Im doing, along with the "findHyperlinks" macro,within that workbook, that I am currently working on.
I think I am closer but how do I get all of the data from A2 in the origination worksheet and then copy it to the last blank cell in column A in the destination sheet?
Code:
Sub test4()
Dim lastrow As Long
Set StartSheet = ActiveSheet
'MFG PART NUMBER
StartSheet.Range("R2").Copy
Workbooks.Open Filename:="D:\_DoxaMobiusServtrax Import Template"
[Code]...
I have this code that copies existing folders to a new destination path. How do I change the code so that the From path and To path is based on cell value rather than writing it into the code?
Code:
Sub Copy_Folders()Set Fobj = CreateObject("Scripting.FileSystemObject")
Fobj.CopyFolder "C:UsersHengDocuments1243-01234photos", "C:UsersHengDocumentsCasework1243-01234photos"
End Sub
i am writing a custom copy/paste routine which will paste data from a selection if the cell being pasted to is not locked.
The user will select the text for coping and then launch the routine.
The routine will query for destination cell and then process the paste.
This is my routine so far:
Sub testCopy()
Dim c As Range
Dim MyRange As Range
Dim Dest As Range
Set MyRange = Selection
Set Dest = Application.InputBox(prompt:="Select a cell", _
Title:="Paste Destination", Type:=8)
For Each c In MyRange
If Dest.Locked = False Then
Dest.Value = c.Value
End If
'dest = ?
Next c
End Sub
What I need to know is how to increment the dest reference so it is in the same 'relative' position from the initial dest that c (from the selection) is in or is there a better way to do this?
I have a source data sheet that has around 50 columns. I want to copy and past selected columns to a destination sheet.
View 1 Replies View RelatedI have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...
VB:
Sub GetRangeName()
Sheets("TOTAL").Select
[Code].....
use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.
I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username
Run-time error '1004' Application-defined or object-defined error. I am trying to use this
View 2 Replies View RelatedI was trying to use the below code
View 4 Replies View RelatedFor some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
I keep getting a Run Time Error 1004 (Application Defined or Object Defined Error) when my sub reaches this line:
ActiveCell.Formula = "=SUM(D222,D224,D226,D227,D229,...)"
In the actual line of code the "..." above is another 20-30 or so cells in column "D". Probably no more than 150-170 characters in the line.
If I remove half of the cell range names it works, but I need all of the cell ranges for the equation.
I am trying to copy the info from one workbook to another workbook.
I keep getting the above referenced error...
Private Sub CommandButton1_Click()
Dim filepath As String
filepath = Range("A100")
MsgBox ("File Appended")
Workbooks.Open (filepath)
Windows("CorrespondenceMaster.xls").Activate
Sheets("Sheet2").Select
Range("DesNo", "LocationPath").Select
Selection.Copy
Windows(filepath).Activate
Range("A2").Select
ActiveSheet.Paste
End Sub
Am getting Object variable not set error in the selection.find code. I dont see anything wrong with the code..
VB:
rivate Sub Btn_Edit_Click() ' code for Edit Function
Dim findvalue As String
Dim FileName As String
[Code].....
I can see the value of "findvalue" do exist in the column "A:A".
I am trying to make this code work, I am getting the subject error:
HTML Code:
Private Sub CommandButton1_Click()Dim cols As VariantDim NextRow As ObjectDim Myrow As Object
Sheets("Sheet1").SelectWith Sheet1
Myrow = Range("A" & Rows.Count).End(xlUp).Row + 1
[Code] .....
Sub Macro2()
'
' Macro2 Macro
' Macro recorded 7/28/2007 by i8ig
'
If Target.Column = 1 Then
If Target.Value = "Med" Then
Rows(Target.Row).Interior.ColorIndex = 4
Range("H3").Select
ActiveCell.FormulaR1C1 = "=IF(RC[3]="""","""",RC[3]-3)"
Else
If Target.Value = "Tasc" Then
Rows("4:4").Interior.ColorIndex = 44
Range("H4").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
Else
If Target.Range = "NBAR" Then
Range("J5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-5)"
Range("I5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
Range("H5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
End If
End If
End If
End If
End Sub
I continue to receive an error '424' object required and I cant find it
I have two worksheets one called "invoice" and one called "tenants"
"Invoice" has a userform where I want to enter a tenancy number and then lookup the tenants name and address from "tenants"
I have put the following macro in
Sub lookup()
Dim res As Variant
res = Application.VLookup("A1", Tenants.xlsx("Sheet1"), "$A:$H", 2, False)
If IsError(res) Then
MsgBox "not found"
Else
MsgBox "found at pos: " & res
End If
End Sub
but get the following error - "object required"