Copy/Paste Error Object Doesn't Support This Property Or Method
Oct 16, 2008
The macro below is stored within worksheet "Data Lookup". When the value in B1 changes, the code is executed but fails when it comes to the paste function. I get a "Object doesn't support this property or method".
Also, it appears the copying is not occuring correctly. It is supposed to copy from the Data3 worksheet but, in fact, its copying from the Data Lookup worksheet. Does storing this macro within a worksheet prevent the macro from moving between sheets?
Sub Worksheet_Calculate()
If Range("B1").Value = Range("N1").Value Then End
Sheets("Data3").Select
Cells(13, 6).Copy
Sheets("Data Lookup").Select
Cells(23, 11).Paste
End Sub
View 9 Replies
ADVERTISEMENT
Oct 3, 2008
When I run my code (which opens Excel from Access) it does everything it is supposed to but I then get the above error but I do not get the error if I open the VBA window and then run the code. (The code is password protected, not sure if this is relevenat though).
View 9 Replies
View Related
Nov 1, 2012
I am using Excel 2003. I get the above error and when I press debug, the issue highlighted is the following:
Code:
graff:
adde.TextBox6.Text = "ok"
shet = ActiveSheet.Name
Set CurrentChart = ActiveSheet.ChartObjects.Add(5, 20, 350, 200)
[Code].....
View 6 Replies
View Related
Jan 8, 2009
I'm getting a really weird error in that I can't reproduce it. It sometimes occurs when I open the document and sometimes not. HEre is the
Private Sub Workbook_Open()
Dim dic, Dn As Range, rng As Range
Set rng = Sheets("Moisture").Range("B2:B1000")
Set dic = CreateObject("Scripting.Dictionary")
With dic
For Each Dn In rng
If Not .exists(Dn.Value) Then
.Add Dn.Value, ""
End If
Next Dn
Set wksPayment = Sheet10
wksPayment.ListBox2.List = .keys
End With
End Sub
The line that hangs up is the wksPayment.Listbox2.List = .keys line. Any ideas or ways to test or further figure out what is causing the problem?
View 9 Replies
View Related
Dec 12, 2011
I'm trying to remove lines in my line charts. I searched the internet and find the following code:
Code:
Sub RemoveLines()
Dim ser As Series
For Each ser In ActiveChart.SeriesCollection
ser.Format.Line.Visible = False
Next ser
End Sub
However, when I run the code, I got "Object doesn't support this property or method". I did select the chart. I have excel 2003 with vba 6.5.
View 1 Replies
View Related
Nov 6, 2013
Following code from net and applied.
But runtime error on the highlighted line: "object doesn't support this property or method
Code:
Private Sub cbAddImage_Click() With Application.FileDialog(msoFileDialogFilePicker)
.AllowMultiSelect = False
.ButtonName = "Submit"
.Title = "Select an image file"
.Filters.Add "Image", "*.gif; *.jpg; *.jpeg", 1
[Code] .......
View 6 Replies
View Related
Sep 14, 2007
I was using the following macro on Excel 2000, 2002 & 2003 for many years without a fuss. Recently, I upgraded to Excel 2007. When I run the macro now, I get the following error message:- Run-time error 445 Object doesn't support this action.
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Documents and SettingsDesktopCommercial Database"
.SearchSubFolders = True
.Filename = "*.*"
.TextOrProperty = "BANK"
.MatchAllWordForms = True
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
MsgBox "There were " & .FoundFiles.Count & _
" file(s) found."
End If
End With
End Sub
Additional info:- The 1st line of my code which is With Application.FileSearch is highlighted in yellow when I run this macro.
View 2 Replies
View Related
Nov 19, 2009
I'm trying to write some code to make an existing chart display the correct series of data. However, on the ".SeriesCollection..." lines, it gives me the error "Object does not support this property or method." I'm using a Bar-Line graph, if it makes any difference.
View 5 Replies
View Related
Jan 5, 2010
I am trying to use the Cells Property in VBA but it is not working and I cannot figure out why for the life of me. Below is my ....
View 9 Replies
View Related
Jan 6, 2009
I have a userform listbox2 that i am trying to save info from to a worksheet.
I am getting the error "Object doesn't support this poperty or method" when I am trying to set the cell of a find ......
View 9 Replies
View Related
Nov 29, 2006
Not sure if I am having a brain fade or not but the following code gives an ‘Object doesn’t support this action’ error (at the ‘with..’ line) and I can’t figure out why.
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "D:"
.FileType = "*.*"
MsgBox (.FoundFiles.Count)
End With
End Sub
View 5 Replies
View Related
Nov 3, 2008
While clicking a button in the excel, am getting a run-time error. Everybody's need is urgent even I understand boss. Anybody else who is in the same shoes as mine. Here goes the solution:
View 5 Replies
View Related
Jul 7, 2009
When I execute this, I got error run-time error 445, object does not support this action. I am using window vista, microsoft office 2007. How can i change the code to make it workable?
View 2 Replies
View Related
Dec 10, 2008
I'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
View 3 Replies
View Related
May 2, 2009
I'm trying to set the print area on two sheets in the same workbook and it is returning Method 'Range' of object' _Global failed error every time and I can't figure out what code to change to make this error stop happening. here is my
View 5 Replies
View Related
May 20, 2008
I start in my "Action Plan for For Single Market" worksheet and if I click on the Command Button I then want to read in a couple of variables, and jump to a second worksheet (called "Market Action Plans") where I then want to copy a range, and then paste it in another area in that same sheet.
I thought I had worked out what to do, but when I execute I get a "run-time error 1004" when the macro gets to the "Range("Updated_Results").Copy" line. Excel describes the error as "Method 'Range' of object '_Worksheet' failed'" - which might as well be a foreign language as far as I am concerned!
Private Sub CommandButton2_Click()
Current_Market_Row = Range("Current_Market_Row")
First_Col_Action_Desc = Range("First_Col_Action_Desc")
Sheets("Market Action Plans").Select
Range("Updated_Results").Copy
Cells(Current_Market_Row, First_Col_Action_Desc).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Sheets("Action Plan for Single Market").Select
End Sub
I am an occasional macro-creator and every now and again, I come across this type of problem where I can't get variables to be reconized, etc. I think it's because I don't understand enough about Private versus Public, and how to declare variables.
View 9 Replies
View Related
Mar 1, 2007
The following bit of code has been working fine but has now started getting the following error;
Method ' sheets'of object'_global' failed
This kicks in on line 3.
The worst thing is it will not let me get into the workbook at all
Sub KillForm()
'Update Names on Sheets
If Sheets("Daily Visits May").Range("e1") = "y" Then Goto 10
If Sheets("Daily Visits May").Range("d1") > 38837 Then Else Goto 10
Worksheets("Daily Visits Apr").Range("B5:C1500").Copy
Worksheets("Daily Visits May").Select
Range("B5").Select
ActiveSheet.Paste
View 9 Replies
View Related
Oct 11, 2012
Why am I getting method range of object global failed error message? The error seems to lie in the line highlighted in red.
VB:
[CODE]Private Sub btnEditDelete_Click()
Dim customerID As String
Dim rowID As Integer
Dim foundFlag As Integer
Dim lastrecFlag As Integer
Application.ScreenUpdating = False
[Code] .....
View 4 Replies
View Related
Sep 26, 2009
I'm so new to VBA this is probably another simple question, but here goes...
The error-text is:
"Method 'Range' of object '_Global' failed"
It happens at:
rng = Range(gCSchedule.Ws.Cells(gCSchedule.DateRow, StartCol))
See following code.
View 8 Replies
View Related
Mar 16, 2009
Method range of object global failed
When i run this ....
View 9 Replies
View Related
Jun 28, 2006
I have a cet of CommandButtons on sheet 1. The code for these buttons is in the code section of the sheet. A named range is referenced in this code. This named range is on sheet 2. Every time I try to reference this or any named range (from any other sheet), I get this "Run-time error '1004': Method 'Range' of object '_Worksheet' failed"
The last time I had this error I was able to fix it by moving the code to Module1. I tried that here, but it did not work (I can't figure out how to call it from the sheet). CommandButton. Here is the code from the sheet for one of the buttons:
Private Sub TBEnterUp_Click()
iLast = Range("WBDate_DayLast").Value '<<<<<<<
iItem = TBEnter.Value
If iItem = iLast Then
TBEnterUp.Visible = False
Exit Sub
End If
TBEnter.Value = iItem + 1
If iItem > 0 Then TBEnterDown.Visible = True
End Sub
It is a simple number advancer. It is working in the UserForm I took it from. I have included a sample file of the problem. Feel free to look at it and borrow anything in it that you might like.
View 2 Replies
View Related
Sep 6, 2006
i get this error on the line in bold Method Add' of object 'CommandBarControls' failed (run-time error '-2147467259'). im not sure why its giving that problem, but im not very fluent in custom toolbars.
'//The following two procedures add a custom menu to the workbook programmatically//'
'//and then delete it//'
Public currentMonth As String
Sub CreateMenu()
Dim mybar As CommandBar
Dim myControl As CommandBarControl
Set mybar = Application.CommandBars.Add( Name:="CustomButtons", _
Position:=msoBarBottom, Temporary:=True)
mybar.Visible = True
Set myControl = mybar.Controls _
.Add(Type:=msoControlButton, ID:=1)
With myControl...........................
View 3 Replies
View Related
Feb 10, 2009
I am trying to build a macro which will format the columns of a spreadsheet - basically it inserts some columns, writes formulas and highlights them. Here is a code I have got so far...
When I try to run this I get a run time error 1004 - Method 'Range' of 'Object'_Global' failed. The part of the code
Range("N2:N").FormulaR1C1 = "=(RC[-7]/RC[-2])"
is highlighted in the debugger.
Can anyone tell me why this is happening, also it would be great if you could suggest better ways of writing this code - as I am new to vba programming and most of my macros are built using the recorder and then 'working' on them.
View 11 Replies
View Related
Mar 25, 2009
I have an interesting error that only happens when there is one row of data in the worksheet (sheet2 or "Half Payout"). Rows 1 & 2 are headers, row 3 is when the data starts - if any. With either no rows of data or more than one the coding works just fine. Here is the exact error message I'm getting: Run-time error '1004': Method 'Range' of object '_Worksheet' failed.
The following code is supposed to sort the rows of data when opened and then activate the first open cell below B2.
View 6 Replies
View Related
Jan 30, 2010
I keep getting this error on this line
[code]ThisWorkbook.VBProject.VBComponents("Module2").Export FileName[CODE]
of this
View 3 Replies
View Related
Dec 26, 2008
i'm tring to reuse this code which creates a label on excel. The data used to create the labels is on the "Data" sheet and the labels are generated on the "Label" sheet.
The problem is the first time i run it it generates the labels, then whenever i try again it gives me the following error; Method 'Range' of object '_Global' failed. Each row on the "Data" sheet repreents a label.
View 6 Replies
View Related
Oct 7, 2011
Rows keep changing so I have variables to keep track of various locations.
At this point:
tot_new_place equals 30
tot_new_cnt equals 51
I want to take the data in B30:H30 and copy, auto fill to B51:H51
I am receiving the error on this line of code:
Range("B" & tot_new_place & "").Select
Selection.AutoFill Destination:=Range("R" & tot_new_place & "C2:R" & tot_new_cnt & "C9"), Type:=xlFillDefault
View 9 Replies
View Related
Feb 28, 2013
I M Getting Run Time Error 1004 Method Range Of Object _ Worksheet Failed
Option Explicit
Private Sub cboPart_AfterUpdate()
'On Error Resume Next
[Code]...
View 1 Replies
View Related
Jan 13, 2010
I am trying to create a macro in my personal macro book such that whenever any workbook is opened the calculation settings (tools, options, calculation tab) are set to semiautomatic and do not calculate before save. The macro works when I am opening Excel itself (Book1) but when I open an already saved file it gives me
Run-time error '1004'
Method 'Range' of object'_Global' failed
From there I choose Debug, the VBE window comes up, and I hit F5 to continue the code without doing any actual debugging. Here is the code that I am using. This is in the Personal Macro book on the "This Workbook" section....
View 9 Replies
View Related
Jul 28, 2006
I am not familiar with Excel/VBA and I tried a couple of suggestions with no luck. The excel file contains three forms and three modules and it is intended to calculate and build Electrical panels. I didn't write the code. I am just trying to fix the error. I was trying to attach the .xls file but it is 178 KB. How can I post the whole code.
View 8 Replies
View Related
