I think I am closer but how do I get all of the data from A2 in the origination worksheet and then copy it to the last blank cell in column A in the destination sheet?
Code:
Sub test4()
Dim lastrow As Long
Set StartSheet = ActiveSheet
'MFG PART NUMBER
StartSheet.Range("R2").Copy
Workbooks.Open Filename:="D:\_DoxaMobiusServtrax Import Template"
[Code]...
I have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
I have a source data sheet that has around 50 columns. I want to copy and past selected columns to a destination sheet.
View 1 Replies View RelatedI'm currently working on a problem that I'm having with Hyperlinks. Basically I want to copy the destination data that the hyperlink points to onto another sheet.
The main problem I'm having here is that I cant seem to find a suitable method to do this....I had the idea of using the hyperlink.follow function and then copying the data once I'm there and then moving back to the source hyperlink. My only problem with that is that I dont know how to find the cell address that the hyperlink is in, once I have found that hyperlink.
Therefore my question is two-fold:
- Is there a way to copy the destination data using some sort of hyperlink function?
- If not, is there a way to find the cell address within a worksheet, once a hyperlink is found on that worksheet?
I've attached the spreadsheet below to give a better idea of what Im doing, along with the "findHyperlinks" macro,within that workbook, that I am currently working on.
I have extracted data from multiple sheets and now want to mark this data as "Paid" and for the macro to go back and change the value in the original sheet on a row in column "AR" to "PAID.
All the columns have the same data type in.
The extracted data contains the original sheet name and each row has a unique ID No to it.
I know I probably need to use INDEX and MATCH and then Offset to post value.
Attached worksheet shows the data and columns.
I need to firstly find data in the main sheet which relates to the activecell and then I want to copy and paste that data into another worksheet.
The simplest of ways I guess would be the .xldown function however this seems to copy the blank cells as well as the cells with data, which is no good. I have therefore written code as below which finds the first cell with data, copies and pastes, then loops.
How do I set the loop to look at the next cell down from the initial copied cell and if there is data in it to paste it into the cell underneath the one I have just pasted into?
Range("D3") = ActiveCell.Offset(0, 1)
SheetName = Range("D3")
ActiveCell.Offset(0, 2).Select
[Code]....
i want user using userform to search for the wanted data then the displayed data be copy to another new sheet.. and be able to print!
hope the idea is clear!
i will attach the file in case someone wants to show me the example...
I'm trying to create a database which can analyze data for my thesis.
The idea is the following:
I have all data saved on multiple work sheets in one workbook.
I would like to use the find function and when I search for specific data this is either summarized in a new sheet or else can be printed.
Im going to try to make this as clear as possible. I cant use my actual data because it wouldnt make any sense to anyone so Ive made up an example problem. Here goes...
Lets say in Sheet 1 I have two descending columns of data. Column A is MODEL of Vehicle (Civic for example). Column B is vehicle identification number (xxx for example). Sheet two has 4 columns of data, but only one is really required for this example. Cell A1 is the MAKE of vehicle (Honda for example). Directly below that in Cell A2 is the MODEL of the vehicle (Civic). There are then a few rows of empty space until it gets to the next vehicle MAKE and MODEL.
So in Sheet1 there is a long list of MAKE's in ColumnA and VIN's in ColumnB. Sheet2 Has a long list of MAKE's and MODEL's in ColumnA and random data in other columns.
What I want to do is assemble a Macro to start in Sheet1-A2, read the MODEL then copy the corresponding Vehicle Identification Number in B2. I then want it to go to Sheet2-A2 and start searching downward until it comes across a matching MODEL. Once it finds the match I want it to step downward 2 cells and paste the Vehicle Identification Number. Then return to Sheet1-A3, and repeat the process until EOF.
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
first need to look for "PR" in column G, if found need to cut the entire row and insert at the top of the same worksheet.
View 1 Replies View RelatedI tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
I want to fill all a column bottom-up but without specify cells in format "A1500:A2" like
VB:
Range("H1578").Select
Selection.AutoFill Destination:=Range("H2:H1578")
{H1578 have a formula so...}
I have data in the first 7 columns, with a variable(Range) for the first 5 columns
VB:
Dim oRange As Range
Set oRange = ActiveSheet.Range(ActiveCell.Offset(0, 0), ActiveCell.Offset(89, 4))
{The first cell in it is A1}
My question is : How to fill Range("H2:H1578") using my ''oRange'' variable?
I try with OffSet but my code didn't work. I need to do the same with the 6 columns to the right and then plot in a chart.
I am attempting to create a macro that opens a file named "shrinkage-billing.xls", searches for a variable "PTOSH" in column A, copies the adjacent cell and pastes the data in another worksheet named "Shrinkage Report 2009.xls"
The code follows ...
Since you can copy to someplace with one line of code like this:
Sheets(1).Range("A1:Z5000").Copy Destination:=Sheets(2).Range("A1")
is there any way of doing this with formatting, or are things like paste special features only possible by selecting something?
Ie: Values, column widths, formats, etc. Does the copy destination argument only allow simple copying?
Is there any way to use the formula below and send only the values?
FY07.Copy Destination:=Sheets("Age Roll Up").Range("A1")
I know that I can copy and paste special, but was wondering if I could tweak the above line in any way to?
I have the following code to copy a range to another destination. I would like only the value to go to the destination. How to implement this?
Set rngtocopy = Nothing
On Error Resume Next
Set rngtocopy = Range(rngdata(2, 9), rngdata(lngrows - 2, 9)).SpecialCells(xlCellTypeVisible)
On Error Goto 0
If Not rngtocopy Is Nothing Then
rngtocopy.Copy Destination:=Cells(5, 14 + cc + (t - 1) * 3 + (i - 1) * 17)
I am sure this is simple but cant get me head around it (tried paste & paste link).. I am wanting to copy formulas in file (A) to file (B) with data source linked in the file (A).
i want is when i copy the formulas to file (B) sheet 2 and it should retain the original path say H:excelfile A[sheet1]$G$1+....xls and source from which the data is being used.
ws5 and ws7 are defined and working due to other parts of the code already using them. ive copied the syntax from some of my other copy destination codes the only difference here is instead of ("A2:J10") ive got "(Cells(2,1):Cells(iRow, 10)" as the row number for this is variable, and it is calculating the correct value for iRow and iRow2. its probably something stupid im missing but i cant figure it.
View 7 Replies View RelatedI would like a button in (Sheet2) to do this operation when clicked: jump to (Sheet1) and enter Sheet2's name into cell B4, where this button is used in many sheets similar to Sheet2(aka2,3,4,5,6...) that all do the same to jump to sheet 1.
View 2 Replies View RelatedI have a spreadsheet that I have been entering and deleting data from. Currently there is data in A1:J1 only, however, when I Ctrl+End my cell focus is on J242. I have deleted rows 2 through 300 and cleared all from the Edit menu on cells A2:J242, both to no avail. How do I clear this so that if I Ctrl+End it goes only to J1?
View 2 Replies View RelatedI have a NAMED RANGE of data consisting of 4 columns and as many rows as is selected. Name it CompTable1.
I loop through all of the 4 columns of data to format it (as shown below). This snippet is for column 1 of CompTable1 (a public variable as string) and I basically have the same situation for each column of 4 but replacing each respective x in cells.(n,X) & offset(0,-x) to take into account of where I wish the data to go as I loop through. Ultimately 4 (For Next) loops.
[Code] ......
The new range with 5 columns is as follows:
Column 1 from CompTable1 = Column 1 of new range
Column 2 of new range is blank for something later
Column 2 from CompTable1 = Column 3 of new range
Column 3 from CompTable1 = Column 4 of new range
Column 4 from CompTable1 is not used in the new range but is formatted
Column 5 of new range is blank for something later
This certainly works very well and with my amateur VBA status am quite proud of how far I have come in a few months. Is it efficient? Is it free of possible errors? Likely not. I wish to rid myself of the "Select" each cell plaque though maybe using a resize, offset or copy destination operation but can't seem to get it working. Once I do get the data in the new range, I format everything without selecting quite well with my methods described above.
I have this code that copies existing folders to a new destination path. How do I change the code so that the From path and To path is based on cell value rather than writing it into the code?
Code:
Sub Copy_Folders()Set Fobj = CreateObject("Scripting.FileSystemObject")
Fobj.CopyFolder "C:UsersHengDocuments1243-01234photos", "C:UsersHengDocumentsCasework1243-01234photos"
End Sub
i am writing a custom copy/paste routine which will paste data from a selection if the cell being pasted to is not locked.
The user will select the text for coping and then launch the routine.
The routine will query for destination cell and then process the paste.
This is my routine so far:
Sub testCopy()
Dim c As Range
Dim MyRange As Range
Dim Dest As Range
Set MyRange = Selection
Set Dest = Application.InputBox(prompt:="Select a cell", _
Title:="Paste Destination", Type:=8)
For Each c In MyRange
If Dest.Locked = False Then
Dest.Value = c.Value
End If
'dest = ?
Next c
End Sub
What I need to know is how to increment the dest reference so it is in the same 'relative' position from the initial dest that c (from the selection) is in or is there a better way to do this?
I want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 1)
Set ws = Sheets("A")
For bi = 1 To 1
vData(bi) = Application.Choose(bi, ws.Range("A1"))
[Code]....
I am trying to write some code that will copy the worksheets from one workbook (wkbSource) to another (wkbTarget), but I need it to maker sure the worksheets being copied from wkbSource don't already exist in wkbTarget. If they do exist, it just skips and moves to the next worksheet. Here is the code I have already, I thought that by adding the On Error Resume Next to the code it would just skip it, but for some reason it is still copying the first duplicate workbook, then it skips.
Code:
Dim wkbSource As Workbook
Dim wkbTarget As Workbook
Dim WorkbookName As String
WorkbookName = ThisWorkbook.Name
[Code] .........
I am trying to copy data from one spreadsheet to another but am having trouble with the VBA code. I am new to doing this so have looked online and tried to find the code to do it. I have come up with the code below but it keeps failing at the While section.
Sub Starters_Click()
Dim Counter As Long
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
Dim Source As Workbook
Dim Dest As Workbook
Dim OriginalWorkBook As Workbook
Set OriginalWorkBook = ThisWorkbook
Const MyDir As String = "C:Documents and SettingsAdministratorDesktop"
On Error GoTo Err_Execute
Application.ScreenUpdating = False
For Counter = 1 To 100
Set Source = Workbooks.Open(MyDir & "HRTest" & Counter & ".xls")..............
I have a list of names in column "A" worksheet1. I need to copy the name from "A1" sheet1 to "A10" on sheet2 Then print a range called "Document" from sheet2 Then get the next name "A2" sheet1 etc. down Until it reaches a " " in column "A" sheet1
View 7 Replies View RelatedI have data in columns a - d; the number of records can vary from a few to a huge number which (to me) makes the problem more complex.
I need a macro that will copy every 3rd record into rows e - h; and every 5th record into columns i - l, etc.;