Copy Determined Columns From Source To Destination Sheet In Particular Order
Oct 27, 2011I have a source data sheet that has around 50 columns. I want to copy and past selected columns to a destination sheet.
View 1 Replies
ADVERTISEMENT
Copy Formula With Source Destination
Dec 10, 2009I am sure this is simple but cant get me head around it (tried paste & paste link).. I am wanting to copy formulas in file (A) to file (B) with data source linked in the file (A).
i want is when i copy the formulas to file (B) sheet 2 and it should retain the original path say H:excelfile A[sheet1]$G$1+....xls and source from which the data is being used.
Match Data On Source And Destination Sheet And Change Value?
Jan 17, 2014I have extracted data from multiple sheets and now want to mark this data as "Paid" and for the macro to go back and change the value in the original sheet on a row in column "AR" to "PAID.
All the columns have the same data type in.
The extracted data contains the original sheet name and each row has a unique ID No to it.
I know I probably need to use INDEX and MATCH and then Offset to post value.
Attached worksheet shows the data and columns.
Find Data In First Spreadsheet And Then Copy To Last Row Of Destination Sheet
Nov 8, 2012I think I am closer but how do I get all of the data from A2 in the origination worksheet and then copy it to the last blank cell in column A in the destination sheet?
Code:
Sub test4()
Dim lastrow As Long
Set StartSheet = ActiveSheet
'MFG PART NUMBER
StartSheet.Range("R2").Copy
Workbooks.Open Filename:="D:\_DoxaMobiusServtrax Import Template"
[Code]...
Edit A Source Value From A Destination Cell
Jul 29, 2008I'm positive that this is a dumb question that's been answered elsewhere, so pardon my n00bness -- this is a one-time project for a non-programmer.
My manager needs to edit values in a spreadsheet. This person is non-technical and put off by spreadsheets, so I want to create a custom view of the data to show only the editable data (with pretty colors and fonts, etc.)
I have a source worksheet and a display worksheet. I need the display worksheet to show the values in the source worksheet, and I need changes in the display sheet to change the referenced data in the source sheet. For example, if cell Source:A1 = "thingamabob", then cell Display:A1 = "thingamabob". If user changes cell Display:A1 to "hoodgie", then cell Source:A1 changes to "hoodgie".
Essentially, the user has to be able to edit the source cell via the display cell.
Is that possible?
Again, please excuse my ignorance -- for all I know, this may be an automated function in Excel... but I've been trying to figure it out for two hours and so I thought I'd ask you nice people.
Find Specific Value In Column Of Another Sheet Then Copy Range Of That Row Onto Destination Workbook
Jun 19, 2014I have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
Moving Data From Source To Destination With Open / Close
May 12, 2014My first shot at a function! hows it look?
Code:
Function wbIsopen(wbname As String) As Boolean
On Error Resume Next
WbIsOpen - (workbooks(wbname).Name = wbname)
End Function
[Code]...
This is also my first shot at using a DIM and Set. I am attempting to move the data from 1 workbook sheet to another after it has been sorted. But if i only have the source open i want it to open the destination workbook and sheet then paste and close the source sheet. If the source is open I want it to go to the next command.
Extract All Approx Match Determined From Expandable List In Sheet Two And Create Table?
Nov 18, 2013I download a daily inventory file from my supplier.
.
I sell only selected products from that file.
.
I would like to use a list of the product part numbers of the products I sell on sheet 2 (Inventory) and have all the results from sheet 1 (ProductFeed) built into an expandable table on sheet two including all the parts numbers (expandable because I will add or delete part numbers from the list) I have listed and not just one part number but several.
.
Second issue: the download file contains part numbers in column "A" with variables like 418, 418_color, 418_size etc.... I would like all part numbers that begin with the number 418 and the ones that contain the variable added to be listed in the new table so I will get a list of all part number 418 and the variables which include 418 in them.
.
I want to return the results of the whole row(s) of the matched data as well in the new table.
.
I have attached a file of the working data that I have with the data I will use although the ProductFeed will change daily which I intend to copy and paste into the table each day.
Formula In Destination Workbook Will Not Update When Change Tab Name In Source Workbook
Jul 17, 2014I am working with multiple workbooks with several tabs in each one. I need the forumula to update the "sheet name" from the source workbook even if the destination workbook is closed.
this is a portion of the forumula I am working with:
=SUM(IF(AND([L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4>=182,[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet26!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet27!$I$4
Copy Data On New Lines From A Source Sheet Based On Criteria
Oct 2, 2006I have a source sheet which contains data. Within this data there is a column (column 3) called Name and I would like to take the data from this sheet and paste it onto a new sheet but in grouped format. So take all instances where it finds criteria 1, then 2 and so on and just paste it on a new line each time it finds a criteria. So far I have the following code to search
Sub loopy()
Dim rngTemp As Range ' the range variable declaration
Dim intCounter As Integer 'counter as integer
' the following loop goes through all the cells in column a up until the last used cell in the column
For Each rngTemp In Range("a1", Range("a" & Rows.Count).End(xlUp))
'increment the counter if the cell has value fridge
If rngTemp = "Fridge" Then intCounter = intCounter + 1
Next rngTemp
MsgBox "There were " & intCounter & " cells equal to Fridge"
End Sub
Copy Chart To New Sheet & Have Charts Source Data Reference It
Jan 24, 2008Sheet1 contains a chart using a dynamic name in Source Data: Values. The dynamic name data is controlled by another cell. When I copy the sheet - i.e. Sheet1 (2) - and change the control cell, the Source Data: Values in the copied sheet still refers to the original Sheet1.
View 3 Replies View RelatedReference A Source Workbook By Having The Title In Destination Workbook?
Jun 6, 2014I want see if it's possible to take the name of the source workbook and put it in a cell in my destination workbook and then use that as the reference in formulas. The source document title includes a date that changes yearly, or in some instances changes entirely, and I want to keep the formulas in the destination workbook intact. I don't want to have to go to every instance where I have used the source workbook and change the title. Instead I would like to copy the source workbook title, paste it into the destination in the same cell and have that propogate the needed changes into the destination workbook formulas.
View 2 Replies View RelatedRe-Order Columns Based On Column Order Of Another Worksheet
Mar 1, 2008I need a way to re-order an excel worksheets columns based on another worksheet.
Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.
How can i reorder the columns without physically having to cut and paste the columns to match?
I have attached a sample spreadsheet.
You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.
Copy Variable Range & Copy Formulas From Destination
Mar 2, 2008I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
Sorting Chart Legend To Match Source Data Order
Feb 23, 2012The order of entries in my chart legend make no sense to me. Why is it not matching the order of the source data?
View 1 Replies View RelatedAutofill Destination By Columns
Dec 20, 2009How exactly do I autofill by columns? In this example I recorded a macro and cleaned it up autofilling through E1 but it could be a number up to 50.
View 2 Replies View RelatedIncrement Columns For Destination Range
Feb 19, 2007I'm trying to download stock price history inside a loop and move the destination range over one column for each new symbol. I want to keep moving the results from the query over one column each time it loops through....
View 4 Replies View RelatedAutoFill Destination - General Way To Specify Destination Range
Apr 14, 2013I want to fill all a column bottom-up but without specify cells in format "A1500:A2" like
VB:
Range("H1578").Select
Selection.AutoFill Destination:=Range("H2:H1578")
{H1578 have a formula so...}
I have data in the first 7 columns, with a variable(Range) for the first 5 columns
VB:
Dim oRange As Range
Set oRange = ActiveSheet.Range(ActiveCell.Offset(0, 0), ActiveCell.Offset(89, 4))
{The first cell in it is A1}
My question is : How to fill Range("H2:H1578") using my ''oRange'' variable?
I try with OffSet but my code didn't work. I need to do the same with the 6 columns to the right and then plot in a chart.
Copy Destination Syntax
Oct 17, 2008I am attempting to create a macro that opens a file named "shrinkage-billing.xls", searches for a variable "PTOSH" in column A, copies the adjacent cell and pastes the data in another worksheet named "Shrinkage Report 2009.xls"
The code follows ...
Copy Destination With Formats
Apr 20, 2012Since you can copy to someplace with one line of code like this:
Sheets(1).Range("A1:Z5000").Copy Destination:=Sheets(2).Range("A1")
is there any way of doing this with formatting, or are things like paste special features only possible by selecting something?
Ie: Values, column widths, formats, etc. Does the copy destination argument only allow simple copying?
Copy Destination Of Values Only
May 1, 2012Is there any way to use the formula below and send only the values?
FY07.Copy Destination:=Sheets("Age Roll Up").Range("A1")
I know that I can copy and paste special, but was wondering if I could tweak the above line in any way to?
Copy Only Values To Destination
Feb 14, 2008I have the following code to copy a range to another destination. I would like only the value to go to the destination. How to implement this?
Set rngtocopy = Nothing
On Error Resume Next
Set rngtocopy = Range(rngdata(2, 9), rngdata(lngrows - 2, 9)).SpecialCells(xlCellTypeVisible)
On Error Goto 0
If Not rngtocopy Is Nothing Then
rngtocopy.Copy Destination:=Cells(5, 14 + cc + (t - 1) * 3 + (i - 1) * 17)
Copy Destination Object Error
Oct 1, 2009ws5 and ws7 are defined and working due to other parts of the code already using them. ive copied the syntax from some of my other copy destination codes the only difference here is instead of ("A2:J10") ive got "(Cells(2,1):Cells(iRow, 10)" as the row number for this is variable, and it is calculating the correct value for iRow and iRow2. its probably something stupid im missing but i cant figure it.
View 7 Replies View RelatedEnter Sheet Name To Destination Cell
Feb 15, 2010I would like a button in (Sheet2) to do this operation when clicked: jump to (Sheet1) and enter Sheet2's name into cell B4, where this button is used in many sheets similar to Sheet2(aka2,3,4,5,6...) that all do the same to jump to sheet 1.
View 2 Replies View RelatedCopy Columns Resulted From Another Columns Operations And Paste In New Sheet
Dec 30, 2008when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
View 2 Replies View RelatedExcel 2007 :: Resize - Offset And / Or Copy Destination
Jan 29, 2014I have a NAMED RANGE of data consisting of 4 columns and as many rows as is selected. Name it CompTable1.
I loop through all of the 4 columns of data to format it (as shown below). This snippet is for column 1 of CompTable1 (a public variable as string) and I basically have the same situation for each column of 4 but replacing each respective x in cells.(n,X) & offset(0,-x) to take into account of where I wish the data to go as I loop through. Ultimately 4 (For Next) loops.
[Code] ......
The new range with 5 columns is as follows:
Column 1 from CompTable1 = Column 1 of new range
Column 2 of new range is blank for something later
Column 2 from CompTable1 = Column 3 of new range
Column 3 from CompTable1 = Column 4 of new range
Column 4 from CompTable1 is not used in the new range but is formatted
Column 5 of new range is blank for something later
This certainly works very well and with my amateur VBA status am quite proud of how far I have come in a few months. Is it efficient? Is it free of possible errors? Likely not. I wish to rid myself of the "Select" each cell plaque though maybe using a resize, offset or copy destination operation but can't seem to get it working. Once I do get the data in the new range, I format everything without selecting quite well with my methods described above.
Copy The Destination Data Using Some Sort Of Hyperlink Function?
Nov 10, 2009I'm currently working on a problem that I'm having with Hyperlinks. Basically I want to copy the destination data that the hyperlink points to onto another sheet.
The main problem I'm having here is that I cant seem to find a suitable method to do this....I had the idea of using the hyperlink.follow function and then copying the data once I'm there and then moving back to the source hyperlink. My only problem with that is that I dont know how to find the cell address that the hyperlink is in, once I have found that hyperlink.
Therefore my question is two-fold:
- Is there a way to copy the destination data using some sort of hyperlink function?
- If not, is there a way to find the cell address within a worksheet, once a hyperlink is found on that worksheet?
I've attached the spreadsheet below to give a better idea of what Im doing, along with the "findHyperlinks" macro,within that workbook, that I am currently working on.
Copy Folders To New Destination Based On Path In Cell
Sep 27, 2013I have this code that copies existing folders to a new destination path. How do I change the code so that the From path and To path is based on cell value rather than writing it into the code?
Code:
Sub Copy_Folders()Set Fobj = CreateObject("Scripting.FileSystemObject")
Fobj.CopyFolder "C:UsersHengDocuments1243-01234photos", "C:UsersHengDocumentsCasework1243-01234photos"
End Sub
Custom Copy/paste - Cell Reference For Destination
Jan 30, 2007i am writing a custom copy/paste routine which will paste data from a selection if the cell being pasted to is not locked.
The user will select the text for coping and then launch the routine.
The routine will query for destination cell and then process the paste.
This is my routine so far:
Sub testCopy()
Dim c As Range
Dim MyRange As Range
Dim Dest As Range
Set MyRange = Selection
Set Dest = Application.InputBox(prompt:="Select a cell", _
Title:="Paste Destination", Type:=8)
For Each c In MyRange
If Dest.Locked = False Then
Dest.Value = c.Value
End If
'dest = ?
Next c
End Sub
What I need to know is how to increment the dest reference so it is in the same 'relative' position from the initial dest that c (from the selection) is in or is there a better way to do this?
Check If Sheet Exists In Destination Workbook Before Copying
Nov 26, 2012I am trying to write some code that will copy the worksheets from one workbook (wkbSource) to another (wkbTarget), but I need it to maker sure the worksheets being copied from wkbSource don't already exist in wkbTarget. If they do exist, it just skips and moves to the next worksheet. Here is the code I have already, I thought that by adding the On Error Resume Next to the code it would just skip it, but for some reason it is still copying the first duplicate workbook, then it skips.
Code:
Dim wkbSource As Workbook
Dim wkbTarget As Workbook
Dim WorkbookName As String
WorkbookName = ThisWorkbook.Name
[Code] .........