I am searching for a macro that will find duplicate value in row A2 (id) then copy its corresponding column to a new sheet.. please refer to my attachment, and see the result i want on sheet2 and sheet3
Sample.xlsx‎
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
in creating a Macro which copy and paste the data from "Sample2.xlsx" file to "Sample.xlsx" file after row count in each column. Macro should not overwrite any previous data present in workbook.
Note: Sample2 workbook is containing a Variable Columns. Macro should match the headings of the Column in both workbooks and then copy and paste the data after row count.
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have the following codes, they almost work. I run the first code, and it copies and pastes the data, however, when I run the second code, it deletes the information that was previously pasted on column A.
Code:
Sub copy_Client_ID_Tickets_to_Top5_Ticks()
Dim rng As Range, WS As Worksheet
Application.ScreenUpdating = False
[Code].....
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
I have a requirement to copy a few column(like a,d,e,f) from sheet1 and paste it to sheet2 column.
where column a of sheet1 will be copy to column d of sheet2.if anything data is already there then overwrite that column.
I've two sheets: "present" and "removed". I would like to have a whole row copied and deleted and existing rows moved up in "present" when I type the word "yes" in column E. The deleted rows are to be pasted into "removed", with two extra pieces of data - date removed and name of person removing it - to be asked in pop up boxes and inserted into col F and G respectively in "removed".
View 4 Replies View RelatedI need to copy Paste Column A,B,C and D column into the end of the sheet with their headings.
View 8 Replies View RelatedI have 10 worksheets in my workbook. The two that I'm concerned with in this post are "Main" and "Completed".
If Column AA in "Main" contains the word "Complete" (which is from a drop down list) I want to copy the entire row from "Main" and paste in the "Complete" sheet without over-writting previous pasted rows.
Back in sheet "Main" I want the data in that row to be cleared with the exception of Column A as it contains a formula for sorting blanks. If I delete that row it will mess up my links on other sheets.
Essentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
I have to worksheets, the first is filled out and at the end Ive place a button that I would like to open the second sheet and fill in cells that have duplicate info from the first, so just copy & paste but kind of automated for speed.
I have only got as far as opening the second document with the macro, after that im stuck!
The Info I would like to be copied across from the "service Diary" to the "Service Report" would be As follows:
*CUSTOMER
*CONTACT
*MACHINE TYPE
*SERIAL NUMBER
*QUOTE NUMBER
*ORDER NUMBER
I have 4 sheets called Data, xxx, www and yyy. The sheet names xxx, www and yyy are also words that are existing in the sheet Data in Row C. Am I able to copy paste all the lines existing in the sheet Data including i.e. xxx in Row C into the sheet xxx? This should also work for the words www and yyy.
View 9 Replies View RelatedCopy paste macro that I'm using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.
I'm new to excel and VBA and I'm having problems with a copy paste macro that I’m using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies View RelatedAny way to bypass the unprotect sheet in a shared work book, this is what i came up with so far
[Code] .....
I have a set of data on sheet1 indicating test scores and basic information. At the top of the data, I have some drop-down menus that allow me to select certain minimal score results. I used conditional formatting to highlight the rows of individuals that meet the selected criteria from the top of the screen. You will notice in the screenshot, that I placed a button at the top called "Go!". Ultimately, I'd like for when I push the "Go!" button, Excel will copy the highlighted cells and paste them into sheet2 (beginning on row 2 as I have a title bar in row 1).
ExcelSnippet.JPG
I have a sheet that has columns from A to BS, and the column headers start in Row two.
I need to 1st filter the data by Column E where the data in Column E should not contain a particular Value, like"Sleeve".
Then it needs to copy the Columns A,D,G, BN, BO, BP,BP,BR & BS.
And it needs to delete Rows 3 & 4 from the current sheet, before pasting it in a new sheet.
And at the bottom of the sheet it needs to give me a count of the rows and the month end date for each month.
Sheet 2 has 3 cells with values:
C14, C15, C16
I need VB code to:
copy the values in those cells
Return to Sheet 1, let the user click a cell in any row in Colum F, then Paste them (Special, Values and Transpose)
how to unprotect the sheets in order to be able copying datas to to certain cells.
The unprotection works but only when I start the macro the second time. I do not understand why.
After I did the updates I want to reprotect the sheets but that seems not to work in my case.
ActiveSheet.Unprotect Password:="my_password_here"
'unprotect the sheet
ActiveSheet.Protect DrawingObjects:=True, _
Contents:=True, Scenarios:=True, Password:="my_password_here"
' Reprotect the Sheet
I need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
I'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.
See the attached file for my workbook : Book1.xlsx‎
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
I have a data sheet with large macro for processing the data... the last piece of the puzzle is to cut the entire row and paste it into the next available row in another sheet within the workbook if the value in column N is >0. I have tried a few things that I have found out in various places on the net but i seem to always come up with a loop or error of some sort.
View 8 Replies View RelatedI would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
I have a macro code which gets the file list from a folder i specify and puts it in to an excel sheet as a column. I have then made a drop down list from this so the user can select the file they want.
From this file i wish to copy the data on a sheet that i specify. For example the sheet "dump" from file FR7_19.11.2009.xls (which will be a closed workbook) and paste its content in to the sheet "dump" in Summary.xls
I have a macro which opens up the closed workbook FR7_19.11.2009.xls and copies the sheet "dump" and then creates a new sheet of the same name and content in my current workbook (Summary.xls). However when i wish to select a different file to load in to Summary.xls "dump" the formulas i have been calculating information from this sheet all come up with #!Ref errors. I know this is because the macro i use deletes the old dump sheet before re adding a new one containing new data.
I am therefore looking for a macro which will simply just copy and paste the data from any file i select in to a sheet named "dump" as the data is always set out the same in every file but the values are different. I assume this will then mean that any formulas i use relating to this "dump" sheet in Summary.xls will work because the sheet is no longer being deleted and re-added the data within it has just simply been copied over.