Cut And Paste Single Column Data In Different Column According To Year
Dec 5, 2012
I have a file which is divided into 2011, 2012, 2013 and 2014 years in column A. I want these data in different column according to year. For example, Column E(2011), Column F(2012), Column G(2013) and Column H(2014).
Attaching sample a file with sample data to be converted.
It is also to be in consideration that data in column B and C should not be repeated and all year data should come in front of it.
I want this by coding or formula only. I dont want to use pivot table for this.
Expecting Result.jpg
View 7 Replies
ADVERTISEMENT
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Oct 18, 2009
I have 4 columns
Column A is "Customer Number"
Column B is "Date Can Opened"
Column C is "Month" (currently blank except header row)
Column D is "Year" (currently blank except header row)
I would like a macro to do 2 things here....
1. Extract the Month part of the "Date Can Opened" column and put it in column C.
2. Extract the Year part of the "Date Can Opened" column and put it in column D.
Currently, the "Date Can Opened" column is formatted as a date like */14/01 taken from the Number tab in the Format Cells dialog box) ...
View 9 Replies
View Related
Mar 11, 2013
Macro for a repetitive task. I have data in every 3rd column (max of 11 columns) that I want to extract and append the data in column A in sheet 2. The data contains some blank cells and I'd like to remove them also.
I've attached an example in this workbook : tractdata.xlsx
View 4 Replies
View Related
Feb 16, 2008
Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls
I'm assuming this would be done with VBA or a really exotic macro.
The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.
The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.
next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.
I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.
View 9 Replies
View Related
Oct 8, 2013
The data exists in a spreadsheet that has Data from Column B2:CQ18, but it needs to be dynamic and update anytime someone clicks the button (the button is fine and works with all the other Macros)
Here is the code I have so far.
Code:
Dim LastCol As Range
Dim NextColPaste As Range
With Worksheets("Run Hours")
Set LastCol = Range("M3:M18").End(xlToRight)
Set NextColPaste = LastCol.Offset(, 1)
LastCol.Select
End With
That Code will Select the data in row 3 only and not the whole range of 3:18
I have tried Range (LastColData & "3:18").Select and that selects everything on the whole page from row 18 down.
I have done a lot of searching and for some reason this dynamic selection and pasting of data is escaping me this morning
View 1 Replies
View Related
May 18, 2007
Is there a function to put in a new column to get the abbreviated year and month of a previous column in the same row???
Ex. Row A B C D
3/14/2007 5/16/2007 2007-3 2007-5
Instead of using the YEAR MONTH funcion for each row is there a universal function that I could designate to the whole column of C and D something like C=YEAR(A(row#))???
View 3 Replies
View Related
May 14, 2009
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
View 3 Replies
View Related
Mar 21, 2008
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies
View Related
May 11, 2013
I want to group data (rows) using month and year in date column using macro.
For example.
Date ID Amount
01/01/2013 12345 $100
02/01/2013 13452 $73
03/01/2013 12232 $50
04/01/2013 34232 $125
01/02/2013 12322 $67
02/02/2013 12345 $100
03/02/2013 13452 $73
04/02/2013 12232 $50
05/02/2013 34232 $125
01/03/2013 12345 $100
02/03/2013 13452 $73
03/03/2013 12232 $50
04/03/2013 34232 $125
I want to group rows by mm/yyyy in date column. Also I want sum amount column by month.
View 5 Replies
View Related
May 1, 2014
I am working on a spreadsheet to track membership data. In Col A, I have the year that the member started their membership. In Col B, I have the dd/mm/yy that their membership renews.
For instance:
ABC Company began membership in 2002 (Col A). The next billing cycle (membership renewal) is scheduled for 7/1/2014 (Col B).
Is there a formula to take the month and day from Col B and the year from Col A and combine them? For the example above, I want the result to read: 7/1/2002
View 2 Replies
View Related
Sep 3, 2013
I have this data:
Box
Name Number A B C D E F G
Fx 2 A C E
Bx 1 B D
FX 2 A C F
And I would like it in a single column:
Name Number Box
Fx 2 A
Fx 2 C
Fx 2 E
and so on.
I want to make this automatic. The problem is the names of the boxes can change and the data can vary.
View 1 Replies
View Related
Apr 11, 2007
what's the quickest way to convert an array (range) of data to a single column?
I have varying numbers of rows with varying cells of data in each row. I need to quickly compile (transcribe?) all the data into a single column.
View 9 Replies
View Related
Apr 2, 2008
I have a very large spreadsheet, 25 columns and over 16000 rows. I want to merge all of the values into a single column. One caveat, not every cell has data in it, as shown below:
C1 C2 C3 C4....C25
2
View 9 Replies
View Related
Mar 7, 2014
I'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
View 14 Replies
View Related
Sep 19, 2012
I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
View 1 Replies
View Related
Jan 31, 2013
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
View 2 Replies
View Related
Jan 14, 2014
I am creating a tool that is populating information off of another excel document and presenting the information in a different format then the data originally appears. Basically I am unsure how to create a formula, for example, in cell A1, that as I drag it down (A2, A3, etc) the column letter in the formula advances but the row number remains the same. In another words as the formula moves into cell A2, the "Sheet1!D3" changes to "Sheet1!E3", where as normally it would advance to "Sheet1!D4". I just started back up in excel, im sure this is way easier then I am making it seem but I have been unable to come up with a solution.
View 4 Replies
View Related
Jul 26, 2013
I'm doing a termination report at work and I need to create a pie chart based on data in a selected column. Ive never used excel charts before but I cant get the pie chart to display the information that I want.I created a sample workbook. Its very a simple column of data. I would like a pie chart based on the percentages of "yes" to "no". I havent been able to get it to work.
View 6 Replies
View Related
Jun 7, 2014
I am having data in two columns (A & B ). Now I want to get the data in the single column(column C) . Here column A(Name) & Column B(Mobile No). it is something like below.
Here is my input data:
I want to get output results like below in the column C
View 7 Replies
View Related
Nov 12, 2009
I have to worksheets: Sheet1, Sheet2. In sheet 1, I have some data like this (in first col is 1, second col is a, third col is c etc. ):
1 a b c d
2 e f g h
.
.
.
.
I need in sheet 2 in range A1(only in this range one big text), something like this: a,c,e,g ........ ( row1-col2,row1-col4,row1-col2,row1-col4 ......) ( separated by ","). The number of rows from sheet 1 is variable. The dataf a,b,c,d,e,f,g,h ... is some random text.
View 4 Replies
View Related
Oct 19, 2007
I am trying to take data from multiple rows and columns (matrix) and reformat it all to fit in a single column.
It would be great if I could select the cells I want to reformat into the single column as the number of rows and columns containing the original data is not always the same (ie 20x20, 21x35, 56x200) etc...
View 9 Replies
View Related
Jun 18, 2008
I have a worksheet of data collected from on online list of names and addresses all in one column. I'd like to pivot the data so I can sort it, etc. Unfortunately, the entries are not the same length (meaning some have five rows some have six or seven, etc. I have created an only file so everyone can see the issue.
a href=[url]
View 4 Replies
View Related
Sep 23, 2006
I'm looking for a way to sort dates from several columns into a new single column (perhaps multiple columns if the entry columns become too numerous). I've included an example. There are currently only 4 columns, but there may be as many as 20 in the future, each with 20 dates under each heading. Any blank cells would be eliminated. If I filled a blank with a new date, that date would be placed into the chronological column. So basically, this would take the date from several different categories and create a single calendar of events.
View 8 Replies
View Related
Apr 8, 2008
I have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?
View 3 Replies
View Related
Aug 16, 2014
I have thousands and thousands of rows of data which look like the spreadsheet screen shot shown in this image:
ExcelConsolidateRaw.JPG
I want to consolidate them so that they look like the spreadsheet screen shot shown in this image:
ExcelConsolidateDesired.JPG
How to insert it into a module in the VBA editor.
View 3 Replies
View Related
Mar 28, 2012
in moving data from multiple columns to a single column. I have attached a sample image from an excel file which details the requirement. The first column contains a qualifier, that should remain constant when the data from columns B to the end move to a single column "B". The number of columns for each row is different, however, there is a maximum number, say 25. As mentioned in the image, when the data from columns B to the end is moved in to column B, column A is retained fixed, to the original value, and the original data below it is pushed below. Any pointers to how this can be achieved by VBA or without VBA?
View 6 Replies
View Related
Jan 20, 2008
a way to separate out data that has been all entered into a single column
code .....
The above information is a sample of the data. The data has been entered into 1 column, column A.
I want to separate the entries in to 1 column each for vehicle ID, full journal description, actual journal, EE code, Report total and equipment description.
View 9 Replies
View Related
Oct 29, 2008
transposing and sorting data into multiple columns.
Column 1 for example will have the Parent's Name. Column 2 will have the Children.
If Mark has 3 children, X Y and Z
Jim has two children, A and B
then I want Column 1 to display Mark and Jims Name and column two should display all the children
Here is how I want the data:
Column1 Column 2
Mark X
Mark Y
Mark Z
Jim A
Jim B
Please see attachment.
View 3 Replies
View Related
Feb 29, 2008
I saw this thread from June Cut & Paste Macro: Move Address From Column To Row and I think this what I would like to have my macro do. I have one column which is copied and pasted as text in excel and there is several blank rows.
I attached the spreadsheet example - it has 40 lenders, with the top row being the lender name (A1), followed by address(A2), city-state (A3), two blank rows(A4-A5), lender type (A6), approved date (A7), one blank row (A8), lender specialty (A9), telephone (A10) , e-mail address(A11) and two blanks rows (A12-A13) and A14 starts over again. For this example there should be 8 columns and 40 rows (lender name, address, etc...). As I mentioned I think the previous thread's macro would work with some minor tweaks. I couldn't figure out the best way to handle the blank rows and or remove the blanks and what to add or take out of the macro code.
View 2 Replies
View Related
