I need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
Essentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
Purpose:
Build a roster from:
Sheets(Settings).Range("A21").Value (this value is variable)
Problem:
Find that A21 value in Range T2:T100 (each value in the range is unique)
Copy that value to Sheets("Roster") E8
and the next 9 values to
E14
E20
E26
E32
G2
G14
G20
G26
G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
I'm trying to use a VBA Macro to copy and paste a row of cells from 14 worksheets into in another worksheet in a Colum. The worksheets are entitled Data 1, Data 2, Data 3 and so on until Data 14 and the worksheet that I want to paste the data to is entitled sheet 1. The row of data that I want to copy and paste is in the same place on each worksheet C4 - IR4. I can do this using the Macro recorder but there is a lot of code and ultimately I want this to be part of a much bigger Macro once I get better at figuring this stuff out.
I have read that this can be done by using a Do Until and then using a loop. By the way I am using Excel 2003 with XP.
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
In this folder I have workbooks called:
Function1
Function2
Function3
In each workbook I have 4 worksheets
Cashable12-13
NonCashable12-13
Total12-13
GrandTotal12-13
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am using Excel version 2003.
I have two spreadsheets in Excel 2003.
Spreadsheet 1 has 10 columns of data (A-J). I want to copy a variable number of rows from spreadsheet 1 to spreadsheet 2.
When I paste into spreadsheet 2, I'd like to automatically insert blank cells in three places, taking the total number of columns to 13. I'd like columns C, F and I to be blank, and the last column with data to be M.
I will perform this task regularly, and add the copied cells to the bottom of spreadsheet 2, so I'd only like to insert blank cells within the range that I'm copying, not the entire spreadsheet.
I will then populate the blank cells with a VLOOKUP function. Do I need another macro to automatically add the formula to the cells, or is there a way to include this in the cell-inserting macro?
I have a worksheet with data in it. The data could be in any column or row. I am looking for data which contains the numbers 01. If I find such data, I want to move all the data in that particular cell it to column A.
My code(which is not working) is below. I'm using Excel 2003.
Code:
Sub delete_oldads()
'the code to find 01
Dim cel As Range
[Code].....
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have a value in sheet3 cell "C9". (the value is stewart)
I am tring to have the macro go down column "C" in sheet1 and the value is the same as "C9"s value in sheet3 then copy the 7 cells to the right and paste them in the 7 cells right of "C9" in sheet3.
Example: If the value in cell "C9" in sheet3 = "stewart" and the value in "C109" in sheet1 is "stewart" the copy C110:C116 in sheet1 and paste those values in C10:C16 in sheet3.
I guess you wouldn't have to offset, you could copy C109:C116 and paste it to C9:C16 since its the same value.
Thank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.
I need to firstly find data in the main sheet which relates to the activecell and then I want to copy and paste that data into another worksheet.
The simplest of ways I guess would be the .xldown function however this seems to copy the blank cells as well as the cells with data, which is no good. I have therefore written code as below which finds the first cell with data, copies and pastes, then loops.
How do I set the loop to look at the next cell down from the initial copied cell and if there is data in it to paste it into the cell underneath the one I have just pasted into?
Range("D3") = ActiveCell.Offset(0, 1)
SheetName = Range("D3")
ActiveCell.Offset(0, 2).Select
[Code]....
Looking for days and I have tried all kinds of things but nothing works. The lates was the Kickbutt find function. Let me explain what I am tring to do. I have an estimate work book with 11 diffrent sheets of material. When I create an estimate I go thru the sheets and select the quanitity of each material needed. What I would like to do is search thru all the sheets and find all the quanititys in column A greater than 0, the copy the complete row A to F to a sheet named FoxOrd.
Trying AronBloods "Kickbutt find function" seemed to be the code to use but I could not get x = " >0 " to work. So I got rid of all the default 0 in the qty column and just left it blank and changed the code to x = "*" which searched and found all the numbered rows but this included the header row when pasted to the order sheet
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
I can't seem to find a way to copy specific highlighted/selected cells in a filtered list column and paste them outside of Excel 2003. i.e. in Notepad.
It seems to copy all the data between what is selected.
My Filtered list shows rows 5, 28, 35, 40 and 56
If I selected A5, A28 and A40 and select copy
If I paste it into Notepad, it adds A5, A28, A35 and A40
However if I paste my selected copied cell into Excel it works perfect and only adds A5, A28 and A40.
I have three workbooks that contain various types of information. I have an Overtime workbook that lists employees and calculates the straight time and overtime worked for the day. This is the main log that information will be pulled from.
I need writing a macro that will copy over information to an Absent Log workbook and a Production Model workbook.
The Absent Log workbook:
This workbook contains worksheets from each month. I need excel to do a lookup of the name in the Overtime workbook and copy the information from the "OT" column but if that column is empty I need it to pull the information from the "Personal DT" column.
The Production Model workbook:
I need this workbook to automatically pull the total straight hours and overtime hours to the production model for the correct day. This will also pull from multiple sheets.
I am going to be writing this in Excel 2010 but it will be primarily used in Excel 2003.
I uploaded the workbooks to filefactory.
OT Workbook: [URL] ......
Absent "Log" workbook: [URL] .....
Production Model: [URL] .....
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
1. For a file moving from one cell to the next, down the column, get the values and seach for the values in file number two.
2. If that value is found, copy a cell from file 1 to a cell of a column on the same row where the value was found on.
3. Do what was done on number two, but with a different column.
this is what i have so far...
Sub replace()
'
' Macro2 created by david
'
' for the entire sheet, moving from one cell to the next down the column, changing rows
' search for the contents in another sheet, and then if that is found,
' copy the row number to a variable, and then
' copy column K from sheet 1 to column N of sheet 2, using the same variable above
' after that same, but L goes to P.
'
'
Windows("file1.xls").Activate
Rng = Selection.Rows.Count
Dim toFind As String
ActiveCell.Offset(0, 0).Select
Application. ScreenUpdating = False
Dim i As Integer
For i = 1 To Rng
Windows("file1.xls").Activate
toFind = Range("A + i")
Windows("file2.xls").Activate
I have a file that has simple stats for multiple days. At the end of each day is a "Summary" line. I can't figure out how to find the lines that have the word Summary in them and copy all the values in that line to another sheet. I've made a mock up of my data. I have minimal experience with Macros, but am learning quickly.
Period Start
Calls
AHT
Sch
Net
SL Calc
12:00 AM
15
299
5.5
1.24
93.33
[Code] .....
Finding any specified Text like "Cube" down a specified Column in this case "D" when Text has been found
Copy the 24 cells directly below and Then Paste to G1.
There are two problems to solve :
My Excel workbook is composed of 2 sheets. The first one is a Dashboard (Sheet1) and the second one (Sheet13) is where the data is.
I would like to press a button on the first one, enter the text to be found into an Inputbox and then copy-paste cells from the second sheet (containing the data) into the first one.
The data is structured in rows, from A to V columns.
I would like, according the row where is located the found cell, copy given given cells from Sheet13 to Sheet1.
Right now, I have a macro performing the search like desired and selecting the found cell :
Code:
Private Sub CommandButton1_Click() Dim FindString As String
Dim Rng As Range
FindString = InputBox("Entrer le contrat de support - rechercher (DSI....) ")
If Trim(FindString) "" Then
With Sheet13.Range("V:V")
Set Rng = .Find(What:="*" & FindString & "*", _
[Code] .......
I would like to copy cells located in the columns A, B, D, E, F, K, S, (T:U) from the row where the searched string has been found in Sheet13. It has to be copied on Sheet1, on two rows : (N29:Q29) & (N30:Q30).
When a new research is done, the previously copied cells should be cleared out.
2. The second point is about duplicating a button with an associated macro. The macro is running like I want but I have to insert 299 more buttons, with the updated formula according to the row where it is located.
However, one part of the macro has to stay the same because all of these 300 buttons increment a single counter located on Sheet1.
Code:
Sub Button2600_Click() If MsgBox("Etes-vous sûr de vouloir ajouter 1 année de support pour" & vbNewLine & Range("E7") & " " & "(" & Range("F7") & ")" & " ?", vbYesNo + vbQuestion, "Modification du Contrat de Support") = vbYes Then
Sheet13.[A7] = DateAdd("yyyy", 1, [A7])
MsgBox "Contrat étendu d'une année."
Dim x As Integer
x = Sheet1.[R11].Value
Sheet1.[R11].Value = x + 1
End If
End Sub
You can get the excel workbook at the following link : [URL] ....
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
i have a macro that opens 10 other workbooks and copies cells onto a "master" workbook. Until recently, everything worked fine. Suddendly, while it opens the 9 books and copies as it is expected, but when it opens the 10th wb, the macro breaks at a very simple copy/paste.
The weirdest thing is that after it breaks, I cannot select any cells neither in the opened wb nor in the master wb. This continues even after I press the "reset" button in the vba. So, I am only able to select objects (text boxes etc) in my wb and not any cells.
Also, the "arrow" icon on the design toolbar is not active. And I've tried pressing and de-pressing the F8 key, but I still cannot select any cells.
I have option explicit in the beginning of my macro. And i'm using excel 2003.
I need a formula that returns the Nth number from a single column that contains a small number of values within a span of 1000 cells. E.g., within 1000 cells there are 36 with numbers and the remaining cells are blank. I need to obtain the first occurrence of a number in the column, then the second, third... to the thirty-sixth. The end result would be a column with 36 numbers with no blanks in between without loosing the correct order of the numbers.
I have excel 2003 and have been tooling around with the index and lookup functions with no success.
I have a spreadsheet that I would like to loop through column "C" and if criteria is met copy and paste A:C on sheet1 to sheet2 over multiple columns alternately. What I mean by alternately is that I would past the first row in column A6 then the second in E6 then the third in A7 and so on until all items are copied. I purposely left a blank column between both columns of information. I've tried sorting/and advance filtering and couldn't get it to work.
Example:
loop through column "C" If I have the Letter "A" copy data to column "A" and "E" alternately back an forth until I no longer meet the criteria. I start putting data on the 6th row due to header information in rows 1-5.
... If column "C" is the letter "B" copy to column I,M,Q,U
Lastly I could always have less rows of information than I do columns. SO the last column could be empty. I always sort my data by column "C" so data will be sequential.
I have the following codes, they almost work. I run the first code, and it copies and pastes the data, however, when I run the second code, it deletes the information that was previously pasted on column A.
Code:
Sub copy_Client_ID_Tickets_to_Top5_Ticks()
Dim rng As Range, WS As Worksheet
Application.ScreenUpdating = False
[Code].....
Excel 2007, Windows XP Pro
Dim strLoan As String
Dim longCat As Long
Dim rHere As Range
Range("A1").Select
[Code] .....
I can see the cursor move to all the desired cells when this macro executes; it just isn't dropping any data where it should be. I have been working at this stage for the last five hours with no success. I don't know whether my copy-paste methodology is broken or if it is my selection criteria
I was wondering if it's possible to copy and paste formulas to a brand new excel sheet. I created an excel sheet with some forumlas but when I try to copy and paste it to a new page it only pastes the values and not the formulas.
Is there any way to transfer the formulas as well?
How do you copy and paste an entire row from and to another excel sheet, with control of where to copy and where to paste.
I have this paste sh_CIF.Cells(sh_CIF_X, "a").EntireRow.Paste
but it is wrong.
