Correct Syntax Of ROUNDUP / ROUNDOWN
Jan 8, 2007
A UDF function seems to interfere sometimes with the rest of the workbooks entire process for some reason.
I could use the CEILNG function to work around the glitch, but it does not seem to allow the flexibility required because it takes everything to 1. So for example if a Value is 9.24, CEILING will Sum to 10 when when it must be 9, unless I'm missing something.
But if the Value is 9.25 or 9.26 then rounded value must go to 10
The basic math required in the formula bar then is: ...
View 9 Replies
ADVERTISEMENT
Feb 10, 2009
trying to write a formula in a VB to some cells:
View 3 Replies
View Related
Apr 26, 2007
What I want to do is make a simple text link inside of a cell so when it's clicked on it executes the CommandButton(x) VBA script.
I'm guessing =HYPERLINK is going to be the best method.
Like so:
=HYPERLINK("Forms.CommandButton1","E-Mail")
View 9 Replies
View Related
Jul 1, 2008
I have over 60 sheets within a workbook. There are some sheets that I want to hide or unhide depending upon the macro. I have the MR and searched in several areas but keep coming up blank with how to either select or hide these sheets.
This is from the MR:
Sheets(Array("Process", "Utilities", "CodeRef", "DataRef (3)", "DataRef (2)", "DataRef", "Dept Summary New", "Summary_Dept", Summary_ Monthly")).Select
When I try to use this in the code it errors out.
View 9 Replies
View Related
Feb 24, 2014
I have the following code, which executes just fine:
[Code].....
The problem is that I need to run this again in a different column, and the data is held in another sheet that I have given the variable StepTwo to.
I'm not sure of the syntax to do this. Basically - this is what I need the code to do:
[Code] ....
Understandably this is totally incorrect, but it's the best I can do to explain what I'm actually trying to do....
The two parts of SUMIF are both held in a workbook that I've given the variable "StepTwo" to. Both sets of data are also held on Sheet(1) of that workbook.
View 7 Replies
View Related
Jan 27, 2009
I trying to populate cells with a correlation function using VBA, I have set up dynamic references/arguments for the fuction to take on however I just can't get it to work. Currently instead of populating the formula into the cell, it's just populates it as a string based on what's entered below =correl(Ystart &":"& yend, xstart&'":"'& xend").
FYI - The correl function takes on two ranges,. I've predefined these below.
Sub testing()
lastcell = ActiveSheet.Range("c575").End(xlUp).Row
firstcell = ActiveSheet.Range("c1").End(xlDown).Row
Ystart = ("b" & firstcell)
yend = ("b" & lastcell)
xstart = ("c" & firstcell)
xend = ("c" & lastcell)
Range("c575:c580").Formula = "=correl(Ystart &":"& yend, xstart&'":"'& xend")"
'this works
'Range(xstart, xend).Select
End Sub
View 9 Replies
View Related
May 20, 2014
I'm working on a workbook that will track staffing patterns.
The workbook has three worksheets: Sheet1 "RCS", Sheet2 "HCT' and Sheet3 "Hidden". I've attached the workbook to this thread. The password for the form is "j".
On Sheet3 "Hidden" I have two tables that are set up to collect the SUM of columns on Sheets1 "RCS" and Sheet2 "HCT". I'm finding the SUM of each range by way of the background color. I've set up the following formulas and when the "data collection tables" are in the same worksheets as the original information, the formula's work perfectly:
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] ........
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] .......
I have two more functions that aren't working due to the fact that the source values are percentages and NOT plain numbers. The above functions work great for SUM but not for percentages. EXAMPLE--Let's say, 3 sub percentages it gives me the SUM of the 3 percentages (i.e. 85% + 100% + 100% = 285% instead of giving me 95%.
[Code] ........
How might I use the following functions to find the average of the source fields instead of the SUM?
View 7 Replies
View Related
Jul 19, 2006
I´m writting a macro. It works find until a certain point. When I want to change some outputs of the macro without changing the syntax, it display an error mesage while runing the macro. It says Else without If. Which is quite disturbing because the Else was not creating any problem before. Here is my macro before I changed the conditions (this one work nicely)
Sub Copy_Sheet_Beta()
Set wba = ActiveWorkbook
On Error Resume Next
If IsWorkbookOpened("Projekt.xls", "C:Documents and SettingsfrederikSkrivebordRedd Barna") Then
Workbooks("Projekt.xls").Activate 'In case open, just activate "Projekt"
Else
Workbooks.Open Filename:="C:Documents and SettingsfrederikSkrivebordRedd Barnaprojekt.xls"
End If
Set wb = Workbooks("Projekt.xls")
wb.Activate
If Not SheetExists(wba.ActiveSheet. Range("C1").Value) Then
MsgBox "overall doesn't exist!"
Else........................................
View 2 Replies
View Related
Feb 15, 2010
I'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.
View 4 Replies
View Related
Jan 26, 2014
We receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
#####################
149 entries
Column A - Date - OK
Column B - Customer_Phone - Errors (Should be 11 digits)
Row 21 - Customer_Phone - Error (Not 11 digits)
Row 108 - Customer_Phone - Error (Contains letters)
Column C - Outcome - OK
Please correct and re-check.
#####################
View 4 Replies
View Related
Jul 3, 2008
I have a table with 3 columns of dates and then a column with Set # that I
feel in the box #.
I need to see how many items processed for each set per day.
Example:
[url]
The problem is that it counts the correct amount but not with the correct
dates.
The formula that I use is:
=SUMPRODUCT(--($I$3:$I$8<>"")*(($C$3:$C$8=39601)+AND($E$3:$E$8=39601)+AND($G$3:$G$8=39601)))
View 14 Replies
View Related
Apr 24, 2014
How to roundup the value in B2 cell. I provide you the manual output.
View 3 Replies
View Related
Apr 20, 2014
i m using this to get average
r4/s4 = result(t4)
r4 = 5
s4 = 517
Result(t4) = 517/5 = 103.4
now i use the roundup function to get the decimal less value
=Roundup(t4,0) = Result = 103
i want both function in one function to get result
View 2 Replies
View Related
Apr 29, 2013
I need a formula that will roundup the amount in a cell to the nearest 50 (as in 246 £ will become 250 £)
View 4 Replies
View Related
May 24, 2007
I am trying to get excel to roundup to the nearest 100 any numbers that are in 3 columns. Each row in these columns are then added together for a total sum of that row. How can I get all the numbers in these three rows to be rounded up to the nearest 100 after entry?
View 3 Replies
View Related
Oct 6, 2008
I'm using this formula below but it's not rounding up correctly.
=SUMIF('[Bill''s Angels Bowling.xlsx]Variables'!$D$8:$D$71,V3,'[Bill''s Angels Bowling.xlsx]Variables'!$I$8:$I$71)
The list of numbers is follow
45.815625
34.509375
30.7125
21.009375
Should be as follow
46
35
31
21
Total should be 133 I'm getting 132
View 4 Replies
View Related
Feb 22, 2010
I am trying to create one formula (in one cell) so that it performs the following three things:
1) Rounds any number to the nearest dollar
2) Makes the minimum dollar value $2.00
3) If another cell (G2) reaches $100.00 or more, I want it to revert to another cell's (B2) value.
So, in essence, I want to combine the following two things:
=MAX(2,ROUNDUP(F2,0))
AND
=IF(G2>="100",B2)
I do not know how to correctly order these so that it performs all three things I'm looking for it to do. I've posted this before, but was given an answer that created a circular reference and did not make the minimum value $2.00.
View 7 Replies
View Related
Jun 11, 2009
Which returns 0.03316
When I look at the formulas in B17 by clicking on the name of the fuction and then clicking on the function button, the roundup function arguments shows 0.071. Also the vlookup function arguments shows 0.071. Yet I get the #n/a as the result from the vlookup in B17.
I have tried coercing the formula by addin +0 like =VLOOKUP(ROUNDUP(B15,3)+0,$N$2:$O$91,2,FALSE)
I have also tired *0 like =VLOOKUP(ROUNDUP(B15,3)*0,$N$2:$O$91,2,FALSE)
Here is a kicker... When I replace B14 with 0.9 or 0.7 or 0.6, the formula works. but I get a #N/A on 0.5.
View 9 Replies
View Related
Oct 26, 2006
Is there any way that I can apply the roundup feature to an entire workbook without having to do each cell individually?
View 9 Replies
View Related
Mar 13, 2014
I'm on Excel 2010 and I need to round up a complete price list to a 0.90 decimal.
Here is the formula that I have in my cell : =((J5-(J5*N$2))*M5) I need to round the result to XXX.90
View 4 Replies
View Related
Jan 25, 2008
I have a formula that calculates a revenue per day by taking total revenue devided by total days, from that I have another cell doing a VLOOKUP on that to find what tier that value falls under almost like a grade book, however I need the division to be rounded up if greater than x.xx5 because when I do the VLOOKUP sometimes it drops the product to the lower tier when I needed it rounded up. example:
=IF(ISERROR(Data!H6/Data!E6),"",(Data!H6/Data!E6))
if the value of those were to actually equal 1.256 I want to be able to have the VLOOKUP return the tier for 1.26 not 1.25
View 7 Replies
View Related
Jan 8, 2014
I've got a data dump that must be edited/converted prior to pushing it into a different main frame system. There can be NO decimals in the end result. Here's the challenge:
______Col A____Col B___Col C___Col D____Col E
Row1__TOT_____1Q_______2Q_____3Q______4Q_____
Row2__20.00____5.00_____5.00____5.00____5.00___
Row3__26.00____6.50_____6.50____6.50____6.50___
Row4___0.00____0.00_____0.00____0.00____0.00___
Row5_139.00___34.75____34.75___34.75___34.75___
Row6__13.00____3.25_____3.25____3.25____3.25___
Starting on Row 2, there's a break down of 4 quarters of data divisible by 4 using the whole number TOTAL of Parts in Col A.
The analyst must first break it down into 4 parts (as done in Col B through E). Then, round up and down appropriately to ensure that NO DECIMAL data is entered into another main frame system.
Can't copy one formula downward because if it ends in .50, the up/down sequence is diff from how it would be rounded if it ended with .75.
Need vba to be smart enough to evaluate "IF" and apply "THEN" according to what it sees in Col B's data and convert B, C, D and E appropriately. (I will tie this to a button within a toolbar to run the macro/vba when the conversion of B thru E is needed.
EXAMPLE:
IF B's data ends in: xx.00 or xx.50, then convert those 4 quarter's data accordingly:
ROUNDUP, ROUNDdown, ROUNDUP, ROUNDdown, (this one doesnt really matter but works)
IF B's data ends: xx.25, then convert those 4 quarter's data accordingly:
ROUNDUP, ROUNDdown, ROUNDdown, ROUNDdown,
IF B's data ends: xx.75, then convert those 4 quarter's data accordingly:
ROUNDUP, ROUNDUP, ROUNDUP, ROUNDdown,
Using ROW 6 as an example for how to handle xx.25's:
B6 would convert up to 4
C6 would convert down to 3
D6 would convert down to 3
E6 would convert down to 3
TOTAL after conversion = 13
View 9 Replies
View Related
Jul 8, 2014
I'm having the following problem:
A1 & B1 = variable inputs from a calculator
Value C1 is calculated as follows: IF(A1<=0,"",(B1*G1))................(where G1 is a fixed value with 6 digits)
MY PROBLEM: The result in C1 should always be a ROUNDUP value.
I just don't know how to combine ROUNDUP with IF(A1<=0,"",(B1*G1))
View 4 Replies
View Related
Nov 25, 2008
Im having problem with If/Then/Else Statements Not sure what the problem is. I have a text box a user inputs whatever in to create two new tabs one is the tab name then the next is tab completed. It isnt liking my syntax I have here.
View 7 Replies
View Related
Nov 25, 2008
if I copy and Add it created a new workbook not the current on im in. What am I doing wrong?
View 5 Replies
View Related
Jan 28, 2009
Getting a syntax error which and I'm not sure what I've done wrong. This is the bit thats causing the problem:
View 2 Replies
View Related
Aug 27, 2009
what is wrong with this syntax:
View 2 Replies
View Related
Dec 1, 2009
I would like to have an email generated when a cell changes to a particular value. I've developed the macro to send the email with a saved attachment.
When I try to OJT-Engineer the text for the module, I can't get it to recognize the macro. It's a syntax issue, it seems.
What I need is for my module to initiate a macro when a cell changes to a value.
This is the code EXACTLY as it appears:
View 9 Replies
View Related
Jan 10, 2010
A theoretical question following an empiric result.
For the command “SendKeys”, for instance, take these two lines:
View 14 Replies
View Related
Sep 17, 2008
What is wrong with the syntax of this formula?:
COLUMNS(INDIRECT("AverageDemand!$A7:"&A$7))+4
I'm getting #REF errors and I can't work out why...
View 9 Replies
View Related
