I need a quick way to count the number of items in a column
For example
COLUMN A COLUMN B
apples 3
oranges
pears
bicycles 4
cars
trains
buses
There are over over 17.000 rows
I need to count the total number of times 4 different values appear in a column. This formula works for one value:
=COUNTIFS(Source!$C:$C,$B5,Source!$J:$J,$L$3,Source!$L:$L,$H$1)
Where H1 contains the word Assigned. I need to also find and add to count for matches in I1,J1 and K1 which contain New, Pending and Work in Progress respectively.
1. I need to count how many different items within one column, these are formatted as Text. cells G63:G1600
Sample text:
F41D6
F44DD
FABHD
FAXHD
FDTGD
FFDGD
FFTED
FGDFD...................
2. I need to count how many dates fall during the week using the ending dates. Weeks ending 1/06/07, 01/13/07,etc L2:L53, the dates to count are L63:1600.
Sample Text:
09/05/07
09/21/07
09/07/07
09/17/07
09/21/07
09/05/07
10/03/07
09/13/07
09/12/07
09/18/07
09/18/07.............
Looking for a formula that will give me a count of unique entries (i.e. duplicate entries to not be counted.)
basically a formula that says look in D4:D4001 and count only one of each entry....do not count the duplicate entries.
There is a list of interconnections of panels.
For example:
From To
..................
P1.........P4
P2.........P4
P1.........P5
P1.........P4
P3.........P5
P2.........P4
P2.........P4
P2.........P3
There are hundreds of sheets like this with more complex panel numbers (there are 70 to 80 panels). I want to count the number of times each panel is linked with another panel i.e the number of times its name is mentioned in front of it.
This may look like as follows.
............P3.........P4.........P5
P1..........0..........2...........1
P2.........1...........3...........0
P3..........0...........0...........1
I have data in range A2:E5000. Column D contains cost centers entered by users.
I also have a list of valid cost centers in range K1:K10.
What would be the vba code to check and return the count of the items entered in column D which are not valid, based on the list in range K1:K10?
We have one excel file for monitoring of action items generated by the management after the study. As since there were around 3000+ rows has been generated since in the beginning of 1990's till to-date. So I was thinking of instead of getting the result through filter manually, I want to create a formula that will count of how many has been closed this year and this month out of the total numbers of action items.
Is it possible to use the COUNTIF function formula to count the number of items in column A, and date of column B, and closed in column C.
In below, we can see that there were 4 items under Revalidation has been closed this month and the total number of closed this year is 6.
TYPE
MTD Closing Date
Status[code]......
I know how to use array formulae to create a unique list, i.e.{=INDEX($G$1:$G$760,SMALL(IF(ROW($G$1:$G$760)=MATCH($G$1:$G$760,$G$1:$G$760,0),ROW($G$1:$G$760)),ROW()))}
however this is giving all the unique items from column G and I only want the unique items that have a non-zero value in column H as well. This would be the sumif of all instances that would have to be zero. I've tried to crack it and I've tried to search for solutions but so far no joy.
I have a list of patients with different categories. Count values of HBA1c which are less than 6.5 and those greater than 6.5 ONLY and only for those of the Category named "PreGDM" but not for other categories.
View 14 Replies View RelatedI have a workbook (attached).
I want to count the number of times North AND Win, North AND Lose etc.
Can anyone provide me a way of doing this. I dont want to have to use B2&C2 for example. I know I could do this and then use an IF statement (I think).
I have 2 column: item and quantity. I need to count number of items. In column "a" some item are more than one time. I need something like SUMIF function but by using vba. open attached file
View 3 Replies View RelatedCounting unique items in column (numbers)
View 9 Replies View RelatedI have a two massive spread sheets in which I am comparing items from one with the other and changing in one if the other doesn't match the first. I already have reduced the processing time from 6 hours to about 2 minutes by rewriting the macro to use autofilter to make the changes. The problem I have now is that I need to keep some metrics on the changes i.e. when I apply an autofilter, I need to be able to assign a variable to the number of items actually shown after autofiltering so I can add it to a variable that is keeping track of total number of changes. I know that outside of VBA, in regular excel use, the status bar displays # of total# found during autofilter, so is there a way to tap into the program and pull that number during execution of a macro?
View 9 Replies View RelatedI'm new to the forum - I've done a search but cannot find the answer to my problem.
I work in a hospital and have a list of consultants who refer for a particular type of scan over a period of time.
Each time the consultant refers their name is added to a list so I get a list like this:
Dr Smith
Dr Smith
Dr Jones
Dr Smith
Dr Paeker
Dr Paeker
Dr Jones
etc...
I am working with VB 6.0. So far I have been able to create my recordset, opened excel spreadsheet and imported data to the spreadsheet using the recordset. The spreadsheet has five fields and each field has multiple items as in the example below.
Name:Pass#:Amount:
John:22222:500.00
John:22222:500.00
John:22222:500.00
John:22222:500.00
------------------
------------------
Jane:52522:300.00
Jane:52522:300.00
Jane:52522:300.00
Jane:52522:300.00
------------------
------------------
What code can I use to count all the occurences of "John", "Jane" in the spreadsheet?
I need to make a pivot table with data from 2 columns. The data has columns named Unit Type and Name. There are 9 different unit types and over a hundred different names. I need to find a way to make a table that counts however many times the name VACANT shows up for each unit type. Is this possible using a pivot table?
View 3 Replies View RelatedFor each of my staff I need to count if they worked 15 or more days in the 30 days preceding a statutory holiday. (As a follow on problem... If they have worked 15+ shifts then I'll need to calculate the sum of their hours over the 30 days / 30).
I tried the functions below but they didn't work. (the Name1 column records the number of hours worked that day's shift) The actual count in my test case is 5.
=COUNTIFS([stat],"=STAT",[Date],"<[@Date]",[Date],">=[@Date]-30",[Name1],">0") result: "0"
=COUNTIFS([@stat],"=STAT",[Date],"<[@Date]",[Date],">=[@Date]-30",[Name1],">0") result: #VALUE!
=IF([@stat]="STAT",COUNTIFS([Date],"<[@Date]",[Date],">=[@Date]-30",[Name1],">0"),"NO") result: "0"
I have this work sheet with several formulas in columns Z to AD. All of them highlighted red work fine as for as I can tell. I am stumped with the one needed for the cell highlighted yellow AD2. It should count all the dates in AD1 that are Requested Changes Made and/or Rejected in Column "M". AD2 is a total of today minus 8. Equipment Change out - TEST.xlsx
View 5 Replies View RelatedCan someone please help me with formulas to calculate the # of Unique Customers, #of Items, and Amount for Q1, Q2, Q3 and Q4 for the year in A2 (which contains a drop-down list).
Please see attached sample workbook. (I can’t figure out how to combine the formulas for count unique items with a specific quarter.)
I need a formula to count the total items per unique id. For example
Column A Column B
11111 Basketball
11111 Basketball
11111 Basketball
33333 Baseball
33333 Baseball
22222 Hockey
Output to Column C,
ID 11111=3 Basketball
ID 33333 2 Baseball
ID 22222 1 Hockey
I would like to count items that appear in a list that will also appear in several rows. The list is also in no particular order. I have attached an example which may make it clearer than a wordy explanation.
View 2 Replies View RelatedI have a table lists producted items and quantities per weekdays as follows:
Weekday
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Produced item
Yellow
Yellow
Yellow
Red
Green
Blue
Yellow
Amount
1200
300
790
275
942
612
421
What I need is: If I specify the weekday; to start from; and number of days, then I should get the total productivity by item..
For example:
Tue (i.e. starting weekday)
3 (i.e. number of days)
Results:
1090 - Yellow
275 - Red
I've an excel sheet with 1000 rows data. I need a formula to count number of unique items in a column with a condition. Please find a sample data sheet.
I've tracking list that has ordered and delivered items for a given month on weekliy basis such as Week1(W1), Week2(W2), etc. I need a formula to count number of unique item delivered on this month.
Item 1 to item 8 delivered and item 10 also delivered in week 4, So totally I need to get the result as 9.
I was trying to use "countif" for validating and counting each row, it's throwing value! Error =1/(COUNTIFS(A:A,A2, c2:c23, ""&0)) i.e., = 1/countifs(unique items from column A, then nonblank cells in column C) but it's giving Value error..
I just need to count the unique item with another condition.
Item details
Order week
Delivered Week
Item 1
W1
W1
Item 2
W1
W1
[code]....
I would like to make a list like the one below
1 - 50 mm 87 pieces
51 - 100 mm 99 pieces
101 - 150 mm 46 pieces
151 - 200 mm 42 pieces
etc..
I have a list with values all ranging from 1 - 200 mm. Which formula can I use to sum them up in the above 4 classes?
I have a table of data, from which I have created lists for “items created within a period” (the items are paintings on canvasses).
Each list displays which canvasses were completed within 2 dates.
My main data table is large (over 1000 lines and growing) and I need to extract the total quantity of each canvas size that appears in each period list.
My sample attached shows sample data, with corresponding lists of canvasses created within each time period, together with the result I am looking for (shown in red).
is there a formula that gives a true or false statement upon searching a list (ie A2:A6) and finding multiple entries? like, when i search A2:A6 and there are two fields that contain the word "hello", is there a function to say "true, there are multiple entries of the word 'hello'"
View 2 Replies View RelatedI have a Excel sheet and I have put Autofilter for a particular category I choose I need to count number of items in another column(autofilter) , for eg... there are two columns Category , Items When i choose a particular Category I need to count number of Items in the autofilter for that particular category?
View 9 Replies View RelatedI have a sheet with a top to bottom date/chronological list of Horse races arranged so;
Column 1 Column 2 Column3 Column4
Date/Time Race type Empty Horse Name
e.g
01/03/2008 12:30:00 1m stks Mad Robber
01/03/2008 12:30:00 1m stks Don't Run
01/03/2008 12:30:00 1m stks Laughing boy
etc
Then next race
i'm looking for a Macro that will add up the number of horses in each race and enter the number for a given race in Column 3 for each horse in that race. So the example above would become;
01/03/2008 12:30:00 1m stks 3 Mad Robber
01/03/2008 12:30:00 1m stks 3 Don't Run
01/03/2008 12:30:00 1m stks 3 Laughing boy
Then next race down the list;
01/03/2008 12:40:00 2m gtd 1 Walk fast
etc
I found this formula and it works great, but I need to count only items with black font. We use red font to identify lost items so don't want to count them as part of our inventory.
View 14 Replies View RelatedAs the subjects states I need to count the unique entries in a filtered range.
View 7 Replies View Related