How to count 3 the same names or more located in different cell in a row and be counted as 1(Excel File).
1 name1 name1 name1 2 name2 3 name3 4 name4 5 name5 name5 name5 6 name6
I would like to count the number of time a name occurs in a range. I tried using a simple pivot table but it did not work because I may not always use all of the names from the list. Also I would like to avoid using the count if formula if possible. Is there a way to use a pivot table to do this?
View 6 Replies View RelatedI am trying to use a countif formula to count how many students a teacher has. Here is the formula COUNTIF(fceteacher!C:C,E2) I am using a dropdown list to count how many students the teacher has.
View 4 Replies View RelatedIs there a way that excel will count how many cells in a column have data in them, in this case peoples names?
View 3 Replies View RelatedI have a column of random names, say 200 of them in column A. I want to have column D show a name if (and only if) it appears more than once and have a count of how many times it appears in column E.
I can't use vba.
I have a list of 60,000 names in a spreadsheed, column A has the NAME, Column B the STREET NUMBER and Column C the STREET NAME. Heres a small sample.
WADE FRED100603RD ST
CHALWIN E100733RD ST
JAQUE D J101263RD ST
JAQUE D J101263RD ST
JAQUE D J101263RD ST
JAQUE D J101263RD ST
JAQUE D J101263RD ST
BAXTER P M101593RD ST
BAXTER P M101593RD ST
MCLEOD E A101603RD ST
MCLEOD E A101603RD ST
MCLEOD E A101603RD ST
As you can see some of the names repeat, and that is exactly what I want. I want to write a formula in Column D that will indicate how many times each name appears so that it will show, for example, a "5" beside JAQUE D J" and a "2" beside "BAXTER P M".
I have tried using EXACT, MODE, IF ... COUNTIF wouldn't work because there will be some names that are duplicate but at different addresses, besides the range would be enormous.
Is there a particular function which will allow me to count particular names inside cells, e.g, in cell A1 there are three names(Ben, Jack, Tom), cell B1 (Jane, Tom, Andy). I'm looking for a formula which will count the number of occurrences of Tom in cells A1 and B1.
View 3 Replies View Relatedi know its out there, i just cant find it. I have a list of names in a specific pattern of cells on a spreadsheet. I would like excel to give me a number of how many names i have in this spreadsheet. I know COUNT does numbers, but is there a formula that counts names?
View 2 Replies View RelatedI have a column that can have a single name or multiple names typed in each cell. I would like to use a vlookup table to match against the cells values. Exact matches are no problem when it is a single name, but I need a formula that matches up the name, but does not need to match the entire cell text (name1, name2, name3,...) and can count the number of cells that contained this text with in a range. In the example above, I have three names.
If those three names are listed in the vlookup table, I want to count each one so that I can sum up that company 1 appeared x number of times with in the column and is x % of all company names, company 2 appared x number of times and is x% of all companies, and so on. My formula to match exact text values looks like this: =IF(ISERROR(VLOOKUP(D4,$H$7:$J$48,3,0)),0,VLOOKUP(D4,$H$7:$J$48,3,0)) This works fine if the cell value is simply company 1, etc.
I cannot get various formulas (Countif, Match, Frequency, Etc) to work properly.
I am trying to arrive at a total number of matches of numbers in cell range B1:G1 with any numbers entered into the cell range of K1:P11 and have the total of matches display in cell H1.
However I do not want to count duplicate numbers from the K1:P11 cells. (if the number 5 in posted in K1:P11 multiple times I only need it reported once in H1)
B1:G1 is the constant and the numbers will not change - K1:P11 cells will be populated by adding numbers until the all the numbers in B1:G1 is completed and match.
Range
B1 C1 D1 E1 F1 G1
2 7 19 45 22 13
H1 Total of matching numbers in cell range K1:P11
I have a long customer listing, names 5 to 36 characters and several with their location in the name as well as a few common duplicate names. I am trying to produce sheet where the customers name once selected opens in the customers spreadsheet and data can be added/amended for sales etc.The lists are not in alphabetical order as when created a customer number is automatically allocated. My aim is just to type in the first letter of the name and the dropdown appears the customer is selected and their card appears. I have tried data validation, lookup, vlookup, Dropdown and Match/find. they only return the first record found and no sign of any others. Find returned all instances of the letter appearing in every name.
View 9 Replies View RelatedCan I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedCode:
Sheets(Array("Sheet 1", "Sheet 2")).Visible = False
How do I convert the above to using Sheet Codes Names, Sheet1 and Sheet2?
Want to ensure my code will work if the user changes the sheet name.
I have a worksheet with many tables that I use in formulas.
I like tables for a couple reasons, one being the ability to insert/delete rows without affecting the rest of that worksheet row.
Also, automatic copy of formulas/formatting is great.
But, what I really like about tables is the ability to use the naming conventions in formulas.
Problem is when I save this worksheet, after I close it and open it back up, all table references in my formulas have been converted to cell references.
Example:
Code:
=IF((SUMIF('Quote 1'!$M$28:$M$43,">"&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&tblOSSRV[Min Order Cost])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],""&tblOSSRV[Min Parts Per Line])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],"
Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
Is it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?
If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.
I am using Excel 2003 and Windows XP.
I have been given a list of my firm’s target clients (in excel) and an opportunities report (exported into excel) from our CRM system, which lists all the opportunities (i.e. opportunities to sell/provide products/services) that have been created for each client. Some of the column headings in the opportunities report are as follows:
Client; Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created etc.
What I need to do is lookup each client, from the target clients listing, in the opportunities report to see whether an opportunity has been created; and if so, return the row of values (i.e. the Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created) for that client. The result will be placed next to the name of the client in the target client worksheet.
I have a couple of problems. Initially I tried to use the VLOOKUP function to lookup the client name in the opportunities report and return the Opportunity ID (I then planned to use the same formula to return values from the other columns); however, as the client names in the target client listing were not always written the same way as they were in the opportunities report, the formula often returned #N/A. The formula I used was
=VLOOKUP(A8,'Opportunities Report'!A2:F51,2,FALSE)
So for example, the first client that I was looking up was written as “ABC Ltd” but in the opportunities report it was written as “ABC Limited”.
My second problem was that for some clients, there were multiple opportunities listed in the opportunities report. Where this was the case, there was a separate row (repeating the client name in the first column) for each opportunity created. I think that was messing up my VLOOKUP formula as well.
Is there a way to look up the client name, from the target client listing, in the opportunities report even if it’s slightly different and return the row of values for each opportunity created for that client on a separate row?
I have a list of names in a single cell. They are all seperated by a comma, then a space. Example would be: John Smith, Steve Wilson, Wallace O Malley, etc. What formula could I use to pull out the names individually, starting from the farthest right?
View 2 Replies View RelatedI'm trying to sort out a list of names from a website that publishes names in the following format:
DOE John
VAN GOGH Vincent
DA VINCI Leonardo
NADAL PARERA Rafael
JIMENEZ RODRIGUEZ Miguel Angel
What I'd like to do is get the names in the following format
John Doe
Vincent Van Gogh
Leonardo Da Vinci
Rafael Nadal Parera
Miguel Angel Jimenez Rodriguez
Basically all the last names - which are all capitalized - would be moved to the end of the text string. Of course any leading spaces should be removed and I guess using the Proper() function, all capitalized words could be capitalized in a standard way.
I found the following function, here: [URL] ...
but what it does is just take the capitalized words and separate them into a separate cell, which is not all of what I want.
create a script that will replace the names in column A on sheet1 from a Master sheet in the same workbook?
The problem is that different users are entering data on sheet1 col A in different ways example someone may enter Johnc or John C Or John What I want is for something to run down col A on sheet1 and look for the like name on the master sheet if the name matches then do nothing but if the name is like another name on the master sheet then replace the name if they are almost alike.
I need to create a function that selects 4 names randomly from a list of 15 names and displays the 4 randomly selected names in the one cell. Also, you cannot repeat the same name in that cell, (i.e. bob cannot be selected twice in his group of four)
View 1 Replies View RelatedI need to make this macro read FOLDER names instead of FILE names. When I posted this question yesterday to get this macro, I wasn't told that each file in its own folder. I need the folder names now.
_____________________________________
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Ford"
.SearchSubFolders = False
.Filename = "*.*"
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
For i = 1 To .FoundFiles.Count
Cells(i, 1) = .FoundFiles(i)
Next i
Else
Cells(i, 1) = "No files Found"
End If
End With
End Sub
I was given this spreadsheet to count attendance by entering the entry date and exit day, however it's counting the first day and the last. I'm needing it to only count the first day and not the exit day.Book2.xls
View 1 Replies View RelatedHere's what I'm trying to do:
In a spreadsheet I have a series of names with associated data, for instance: ...
I have a database output file where one of the columns contains managers names, often more than once. I want to apply an autofilter on manager name and then copy the result to another sheet or sheets. My criteria for the autofilter is a variable pointing to a list of names that at present I maintain by hand; a for-each-next loop then cycles through the names.
What I would like to do, before running the autofilter code, is to create the list of names via code. This would then automatically pickup names that are missing.
The code I have so far is below:
Public Sub find_managers()
Dim managers1 As Range
Dim names1 As Range
Dim n1 As Variant
Dim n2 As Variant
In my mind it should check the names in the unique list against the imported list and add any missing names.
I have a column which contains names e.g
Mr D.H.JONES
Mr Derek Harold JONES
I want last name first,then space,the other names. This is because I am using VLOOKUP and the sheet I am looking up has the names in this format.
I have the list below and would like to create a new list which contains only names with corresponding values and lists them.
+ A B
1 James 3
2 Derek
3 Brett 6
4 Allan
5 Jess 7
6 Sam 10
7 frank 10
The solution should look like:
+ A B
1 James 3
2 Brett 6
3 Jess 7
4 Sam 10
5 frank 10
I need to compare two lists of client names. One list has 59k names to be compared to second list of 1000 names.
The list of 59k are listed in column D and the other list is in Column E. I tried conditional formatting but unfortunately some of the names are slightly different I.e. fair point communications vs fair point communications inc. I was trying to put in v lookup with a trim function but it didn't seem to be working.
I have two columns listing about 400 and 500 names respectively.
First Column has names in alphabetical order and the second column is random.
One column has names in this format: Last name, First name
And the other column lists the names as first name and then last name without the comma
I am trying to see if the list of names in one column exists in the other.
Is there a way to see this without changing the format of the names in each column? If so do I have to erase the comma?
Name Lists (1).xlsx
I have a task I would like some assistance with…
I have a work book that I have to copy over 70 times for over 70 work locations. As you can see, this will require different file names for each location.
I would like some have help with a code that I can use. If possialbe I like a code that will make copies of the file renaming each with the names I have on another list. Is this feasible?