Counting The Cells That Contain A Specific Value
Mar 12, 2008
I am doing a simple count and it returns a value of zero.
I am wanting column D that equals "Macro" to return the number of rows that column D has Macro in it? I used = Count and I used = sumproduct and =count returned me a zero value and there are several hundred rows that meet that criteria and =sumproduct returned a zero value as well????? What am I doing wrong? Is it so simple that I'm missing something?
=SUMPRODUCT($D$3:$D$1400="Macro")
View 9 Replies
ADVERTISEMENT
Jul 23, 2014
This code colours the NEXT cell when a certain cell houses a value.
Private Sub CommandButton1_Click()
Dim Rng As Range
For Each Rng In Range("G2:C1417")
If Rng.Value = 6 Then Rng.Offset(1, 0).Interior.Color = vbBlue
Next Rng
End Sub
So in this case if a cell has a value of 6 then the Next cell down is colour coded blue.
Here is my question.Is there a way I could write some code to count the number of newly coloured cells on the sheet and then print the total.This would save me having to go through long sheets counting manually.
View 6 Replies
View Related
Jun 10, 2009
I want it to count and fill in a range in column A until it sees a blank or notices the change in value in column B. In the example below i hope it shows what i need to do. i left the last group without numbers to show that is where it needs to start counting over again. i am basically wanting to count down 1st place 2nd place etc.
View 8 Replies
View Related
May 9, 2014
I'm trying to build a function, but I haven't been able to successfully navigate some of the eccentricities of Excel formula-building.
Right now I am working on counting all of the cells that contain numbers (so likely just a =COUNT function), but will be eventually getting other descriptive stats as well. My problem is that I would like to create a formula that will perform the counting/mean calculation, etc., but only on a specific column that has the header cell that contains several specific words. Rather than having to type in the target words for each column, I would like to have the target words in the function be imported from multiple designated cells.
For example,
I want to find how many numbered cells are found in column E headed as "dog brown," but I also have columns headed as "cat brown" "dog black" etc. (which I will be using the formula on later) to paint a small picture, in my descriptive table, "dog" is in B31 and "brown" is in C30, then "cat" in B32 and "black" in D30.
View 11 Replies
View Related
Aug 7, 2009
I am sure this should be REALLY simple, but i just can't find the answer i'm looking for. I have a sheet which changes daily in quantity of information. I want some simple code which counts up the number of populated cells in column A and returns the answer to a cell in another worksheet - or just automatically use it to print that number of pages.
I think i should be able to do the printing side, but, currently have no idea how to count up the number of populated cells in the row. If someones feeling very generous though, giving me the code for printing that number of pages too would save me some work (the worksheet which needs printing is different to the worksheet which needs the number of cells adding up.)
View 2 Replies
View Related
Mar 27, 2014
I wanted to count the number of instances that Matt's been late. If there are consecutive timestamps (ex. 600-620, 620-640) that he's been late, I wanted Excel to display 1 and then I'll just sum it up. Or if Excel can do this directly, add all the instances because what I actually need is the total per person.
In this example, I would need a result of 4 instances.
tell if the blank cells will affect the formula or if I still need to do something about them.
View 3 Replies
View Related
Apr 20, 2009
Basicly we pay single rate between 8.00am and 8.00pm at all other times and on bank holidays and weekdays we pay an enhanced rate. If I can calculate the standard hours then the remainder of the hours are enhanced. Aim to count how many work hours fall between a standard start time (SHS) and a standard end time (SHE) (currently 8.00am and 8.00pm), that do not fall on a weekend and are not a bank holiday.
Column B = Start time (eg 06:00)
Column C - End time (eg 22:00)
Column D= date (from which day of week is derived)
Column E = Y or N for whether it is a bank holiday or not..............
View 4 Replies
View Related
Nov 21, 2011
I have a range of cells (A1:K20 for example) and I'd like to have Excel count the number of times a certain set of initials (PT for example) showed up in any of the cells within the range.
View 7 Replies
View Related
Mar 4, 2007
I am looking to count the number of cells in a range c22:v22 that have bold red font, from conditional formatting.
View 9 Replies
View Related
Sep 14, 2009
I’m looking for a formula that will count the number of occurrences of “YES” in column A between a specific date range (column B) BUT only if the it's categorized as "LAB" (column C).
Up until now I’ve jerry rigged the spread sheet to do it with various filters, if, and countif formulas but I’m looking for something that will fit in one cell and lower the overall size of the file.
To make it even more complicated I’d like to feed the formula the date range information from another editable cell so that it can basically be queried for whatever dates my boss is concerned about at that second.
View 2 Replies
View Related
Sep 11, 2013
I have column A and B , in Column A cells i have words that I need to count the number of specific letters from them.
like :
A2= Apples
I need B2 to show the number of letter "A" in A2's text.
View 4 Replies
View Related
Jan 13, 2014
How to perform this function on Google Spreadsheets (which appears to be slightly different to Excel);
Calculate the sum of the numbers in column D that occur on the 10th January 2014?
And also, Calculate the sum of the numbers in column D that occur between 9am and 10am on the 10th January 2014.
View 1 Replies
View Related
Feb 2, 2009
Please see the attached xls file so see what I am referring to.
I have shipments that are going to different destinations (rotterdam, austria, london, etc.)
I would like to count the arrival dates in column H that fall under each week's span, but ONLY IF its corresponding value in column F is 'rotterdam'.
Column C contains the ideal numbers that I would like column B's formula to return. I plan on doing this for the entire year, but if someone can some up with a formula, I might be able to modify it for the rest.
Note: This is only an example spreadsheet, I am going to be referencing an external file with much more information on it.
View 6 Replies
View Related
Apr 2, 2014
Essentially I want to show how many loans funded in October 2013, from ABC Lending, and I want that result to show in cell K9 of the Sample Output sheet. However, since I'm dealing with filtered data, I cannot figure out the correct combination of formulas to make this happen (e.g., SUBTOTAL, VLOOKUP).
Specifically, I'm stuck with the combination of a) counting the results that meet the monthly date criteria, combined with b) the filtered results. The single cell that I want to solve is K9, on the attached "Sample Output" sheet. Once I see how this cell works, I can figure out the rest. This cell is looking for the number of loans that funded in October 2013, from ABC Lending.
The filtered results are located on the "SCORE Data" sheet. The filter is already configured to only show results for ABC Lending, and the relevant column is labeled "Funded" (column "I"). Since the "Sample Output" sheet is looking for loans that funded in that month, and not a specific date, I created column "U" on the "SCORE Data" sheet, to convert specific day-dates to month-dates.
View 3 Replies
View Related
Aug 22, 2014
I am trying to create a graph that is conditional on two different columns. The first column is a date column, the second column has various categories. I want to show how many times each category appears per month. This database is continually added to so I wanted the formula to reflect the entire column range.
For example, let say I have 5 categories (Grapes, Apples, Peach, Pear, Banana). Column A would show a date (in a M/D/Y format) and Column B would list the fruit type. I want to show how many Grapes were input in January, February, March, etc. and then move on to show how many apples in each month, and so on.
View 5 Replies
View Related
Nov 7, 2008
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
View 9 Replies
View Related
Oct 9, 2009
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
View 14 Replies
View Related
Apr 30, 2007
I'm trying to use a conditional format on a range of cells so that if there is more than 1 "A" contained in any given row, the cells containing the "A"s are highlighted (e.g. red)
I've tried:
=COUNTIF(B2:K4,"A")>1
but it doesnt work & now I'm stuck.
View 9 Replies
View Related
Oct 23, 2007
Is there a function in Excel that will count cells that are different from one another? I.e. it would not count the same value twice. For example, in column A:
a
a
b
a
b
b
c
a
c
The result would be 3. However, if I replaced the first "a" with a "d" I would get 4 as a result. Basically I want to know how many different arguments there are in a list. I could not find a function that does this in the Excel list of functions.
View 5 Replies
View Related
Nov 22, 2008
I am now attempting to do the same type tally except I want a tally for "in conference" Wins/Losses.
I tried the same "SUMPRODUCT" formula as before except this time I held the control key down so as to use only the cells desired. I'm getting "VALUE" for my answer though.
The row I have added in for in conference tally is row 3.
All blue colored cells are for the ACC conference and the green are for the SEC.
Is there a way to get the win/loss figures for selected cells / rows only?
View 8 Replies
View Related
May 5, 2009
I am trying to create a formula to count the # of names up to a certain word. So Cells A1-F1. Are a list of names, the Last name in the list starts with VACANT. How do I create a formula to count the # of names in the list upto the work VACANT? So if VACANT moves to C1 it would decrease the # of names.
View 9 Replies
View Related
Apr 27, 2007
I have written some VBA code to to test if there are 8 names within a range (EF5:FH5, these are 8 merged cells, (4x4 cells)), if there is 8 names within the cells, ie not any empty cells, then the coding will add the new staff name to "trigger_box_1b", and if not then "trigger_box_1a". These trigger boxes are then used to populate further cells.
Private Sub Trigger_Box_1_Change()
Windows("Admin Skills Matrix.xls").Activate 'puts focus on correct spreadsheet
Sheets("Skills Matrix").Select 'puts focus on correct page
Select Case WorksheetFunction. CountIf(Range("EF5:FH5"), 0).double
Case 0
Trigger_Box_1b.Text = New_Staff_Name
Case Else
Trigger_Box_1a.Text = New_Staff_Name
End Select
End Sub
the problems I have be having is that VBA is not recognising the Countif function ("Compile Error: Invalid qualifier", then highlights the Countif). I have tried using a CountA function with the same responce. I have tested the rest of the coding and know that it's working fine (don't think anyone would like to see 75+ pages of VBA coding)
View 3 Replies
View Related
Oct 18, 2009
I know this question may have been posted before, but I can not seem to get this to work with my formula. I have a formula to count the values of a column so that I can convert it to a graph. I am giving a value of 1 to cells that contain numbers between 0 and 9.5 and giving a value of 0 to cells that contain numbers greater than 9.5. It works fine except that I have some blank cells that I do not want to get rid of and it is counting those as zeros and giving them a value of one. I want to ignore the blank cells or give them a value of zero.
=IF(AND(F2>=0,F2
View 9 Replies
View Related
Mar 24, 2014
My data is as follows:
Month 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Number of Starts 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Rolling Number of Cases 10 20 30 40 50 60 70 80 90 100 110 120 120 120 120 120 120
In my dataset above the cases finish after 12 months (hence why there is a maximum number of cases).
What I am seeking is a method to count along a certain number of cells, then sum the contents of those. For example, I would like to count the contents of up to 12 cells, then sum those 12 cells.
Where it gets difficult is as follows:
- In month 6, I am just counting the contents of 6 cells (months 1-6)
- In month 12, I am counting the contents of 12 cells (months 1 -12)
- In month 18, I am counting the contents of 12 cells (month 7 - 18)
View 5 Replies
View Related
Mar 5, 2009
way to count cells in a spreadsheet (not values in the cells but just the cells themselves). So I have a whole bunch of cells, some are red, some are blue, some are green based on the info i have to keep track of.
so can i write some COUNTIF for red cells green cells, etc
View 14 Replies
View Related
Feb 4, 2010
I have attached a spreadsheet with some tele numbers. What i need to do is to find out which column only has 1 telephone number, eg. only a cellphone number, etc. I have aboout 50 000 records that i need to check if only 1 telephone number is available. Can i use the countblank function?
View 2 Replies
View Related
May 19, 2014
A cell on sheet1 needs to count the number of cells on sheet2 (D3:D31) that has a complete (top, bottom, left and right) border. This is my best shot at it.
[Code] .....
Sheet1 cell I input =CountBrds('sheet2'!D3:D31)
One issue, on sheet2 for example cell D4 is merged with E4 and F4 as is every even cell in the D column down to row 30. Not sure if that throws a wrench in things or not.
View 4 Replies
View Related
Aug 25, 2009
I have a large number of customers listed in an excel sheet that may recieve a visit from my organisation. The reason for the visit may vary and sometimes a customer may recieve more than one visit. Each Row (or record) maps to a customer. Each column has a visit type which I insert a date in to say when the customer has been visited.
I am looking for a function that will return if a customer has been visited or not. As dates can be summed like numbers I am currently saying in the "Visits Recieved" column =if(sum of dates (visit type colunm) >0, 1,0) Then I simply sum the column to get my answer of how many csutomers have been visited.
View 2 Replies
View Related
Jun 9, 2006
I have a column (within a database) containing hundreds of Project Numbers
(e.g., P8763, PA3229, P1090.1, etc.), and the same Project Number can appear
more than once in the column. I need to count the number of unique Project
Numbers within that column, based on the criteria of another column. Is
there a way to do that using a combination of the DCOUNTA function and a
formula?
View 11 Replies
View Related
Nov 25, 2006
I am trying to write a formula for the following can anyone help please?
I have column D with blank cells and some with purchase order numbers in them. I want to count the blank cells in column D but only if the blank is 3days older than the date recorded in column A. Once I have done this I want to count ther same on every work sheet and I have 24 off them and get one answer.
This will tell us all the outstanding purchase order older than 3days
View 9 Replies
View Related
