I know this question may have been posted before, but I can not seem to get this to work with my formula. I have a formula to count the values of a column so that I can convert it to a graph. I am giving a value of 1 to cells that contain numbers between 0 and 9.5 and giving a value of 0 to cells that contain numbers greater than 9.5. It works fine except that I have some blank cells that I do not want to get rid of and it is counting those as zeros and giving them a value of one. I want to ignore the blank cells or give them a value of zero.
I have attached a spreadsheet with some tele numbers. What i need to do is to find out which column only has 1 telephone number, eg. only a cellphone number, etc. I have aboout 50 000 records that i need to check if only 1 telephone number is available. Can i use the countblank function?
I am trying to write a formula for the following can anyone help please? I have column D with blank cells and some with purchase order numbers in them. I want to count the blank cells in column D but only if the blank is 3days older than the date recorded in column A. Once I have done this I want to count ther same on every work sheet and I have 24 off them and get one answer. This will tell us all the outstanding purchase order older than 3days
I have a Colom with dates, some cell are coloured and others not, some of the non-coloured cells have dates and some not. I would like to count ONLY the non-coloured cells without dates in them.
I am trying to put together a table from which I'll attach a chart showing-at a glance-where open complaints are in our process:
are they open, closed, waiting for samples, waiting for QC, QC'd pending admin approval, etc.
my log consists of a lot of columns which track various pertinant info about each complaint. Such as A-complaint ID, B-date opened, C-date closed, K-initial QC investigation, L-final QC, M-admin status (pending/approved/denighed), N-notes (boiler plate notes like "pending ra samples" or "closed").
I used this formula alot in my various analyses =SUMPRODUCT(--(YEAR(Log!open)=$O74),--('ComplaintLog (101408).xls'!iqc="pending")) without issue.
Until now. I want to search multiple criteria starting with the year (2009, in this case) and whether or not the issue is closed (date in column C). Only need a count.
How do I append the sumproduct formula? I've looked at isblank but get crazy results from #value to #name to 340 (I only have 292).
I have the column E in excel labeled 'Notes' in tab 1 adding at the bottom of the column using(=COUNTA(E2:E29), so if the cell is empty it doesnt add it up in the totals. In tab two i have that same column linked via formula. In tab 2 its counting the empty cells because even though they appear blank they have a formulas in them how do i get it to not count those cells. here is the formula im using in column E tab 2.
I have a spreadsheet that is used to capture information about Service Requests that my team handles in a 6 month period. At the end of January, the metrics for January will be added and the metrics for July will "fall off".
I need to be able to calculate the number of requests that were still active for each month. The formula I have created for this is below:
=COUNTIFS(Table1[Date Submitted],"Month Beginning of the First Month Being Reported", Table1[Date Closed], ">A Day Before Current Month Closing")
So, if my reporting period was July 2012 to December 2012, my formula for December would look like:
This accounts for anything that was opened in the months that was not closed before the month closing of the current month being reported.
I have two issues that I'm having with this formula:
1. The formula does not take into account the Service Requests that do not have a date in the "Date Closed" columns. Is there a way I can also count the items that have a blank "Date Closed"?
2. This formula will have to be changed every time a month "falls off". For example, when the reporting period changes from July to December to August to January, the formula for December will change to:
see attached doc. The graph is showing the overall % from the table above. However months april-december are blank although they have a formula in them. This is causing the graph to show thes months as 0%.
I have a simple date formula that I want to present "yes" in a cell when another cells date is less then or equal to "Today". I just can't figure out how to make it show my result cell as blank if my date cell is blank?
here is my formula.... =IF(G8 <= TODAY(), "YES", "")
Using formula rather than VB, I would like to calculate the number of blank cells that appear in a column BEFORE the first active cell but exclude any blank cells that appear after the first active cell. To elaborate, I have sheets that contain the days of each month and I need to exclude for other calculation purposes, the number of days (cells) where no entry of data has been input at the beginning of a month, NOT after the first data entry. ie. September has 30 days.
The first data entry is the 10th and there are no entries (thus far) after the 10th, the result that I seek, will be 20 (although only one cell has data), being the days left in the month AFTER the first entry. I have looked at COUNT functions but cannot find an solution. Perhaps it's not possible using basic formula?
I have a formula counting non blank cells in another sheet 'Mem' I know there are 21 entries in Column M, which it used to show as the result. Today it shows 0. The 21 entries are still there.
Code: =COUNTA(Mem!$M:M)
The cell containing the formula is B6. The bottom bar of Excel has: Ready Circular:B6
why it is counting every blank cell as 1. I have tried to copy my data as paste as special value and run pivot again but I get the same result. For you visual consideration, I've attached a sample spreadsheet.
I need to fill the following table in another sheet counting the amount of Blank cell there are according to Month, Team and if the name row is filled. I have tried Sumifs, sumproduct,countblank typing them in as arrays but don't seem to be getting anywhere
I have the following formula which counts number of days between dates in two adjacent cells excluding holidays
=NETWORKDAYS(U311,V311,$AA$4:$AA$14)-1
The $AA$4:$AA$14 refers tote range where the excluded holiday dates are stored.
I have included the -1 at the end as it over counts by one day every time. i.e. if the same date is in both cells it counts 1
However if no date is in both fields it count -1 (minus one)
If a date is just in one field it counts a very high number, example below.
-1
16/07/2014
-29879
20/06/2014 08/07/2014 12
[code].....
is there a better formula to use for this? How do I get the result to show ZERO when both cells are empty? can I get the result to show number of days to present date where there is only a date in first column?
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
I am trying to conditionally format the top middle and bottom thirds of a range of data. Problem is, that the range needs to be flexible as sometimes there may be a maximum of 36 cells with data, but sometimes there may be less (so there are blank cells in the range that need not be counted). The methods I have tried always include the blank cells, and so it is not equally formatting the thirds (as it includes the blanks cells as part of the bottom data)....
Here are the 2 methods Ive tried so far using excel 2003) Top 34%: =IF(INT(COUNT($D$3:$D$38)*34%)>0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D $38)*34%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D $38)*67%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D $38)*100%)),MAX( $D$3:$D$38))
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells A40 A41 A42 A43
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.
See attached workbook : Work Order Summary Sheet.xlsx
However, in addition to what the macro already does, it is possible to add another work sheet in the same work book that outputs the values in separate cells? It also has to output the data in order: for example, in the first work sheet the data is inputted at random and has spaces but the macro will have to remove all the blank cells and output them in order based on the first value in the test string, 1, 2, 3, 4, and then 5;
I have a spreadsheet for which I have to set up a formula to get the minimum value from a range of cells, but that range can include blank cells, errors (#DIV/0) and zeros, all of which I want to be ignored. I can work out how to ignore EITHER the zeros
(=MIN(IF(C10:G100,C10:G10)),
or the error cells
(=MIN(IF(ISNUMBER(C9:G9),C9:G9)),
How to exclude both. If I try to combine both of these exclusion criteria it doesn't work and I end up with the answer #DIV/0, which is one of the values I want it to ignore.
I have a similar question regarding coloring of empty cells between two cells with specific numbers as posted in below thread : [URL] .....
This is exactly what I want. But here I have some problem with formula.
=COUNTIF(A1:Z1,1)=1
Above formula could pick cell value 1 and color the empty cells in a row between the cells having value=1. But if I want to use the same formatting for other numbers like 2 or 3 it doesn't work.
For example in row(A1:Z1) I have A1=1, D1=1, and F1=2, K1=2, and O1=3, U1=3
I required multiple conditional formatting that could color the cells based on values first from A to D then from F to K and finally from O to U.
I'm using above formatting it works with cells having values 1 but its not working for 2, 3 or any other cells values.
I have already tried replacing 1 in above formula with 2 and 3 but it doesn't work.
I have attached the sample. I need the cells without the employee or without a boss to highlight a color and i also need the date of certification to highlight if it is more than one year old.
