Counting Filtered Data And Matching To Specific Monthly Headers
Apr 2, 2014
Essentially I want to show how many loans funded in October 2013, from ABC Lending, and I want that result to show in cell K9 of the Sample Output sheet. However, since I'm dealing with filtered data, I cannot figure out the correct combination of formulas to make this happen (e.g., SUBTOTAL, VLOOKUP).
Specifically, I'm stuck with the combination of a) counting the results that meet the monthly date criteria, combined with b) the filtered results. The single cell that I want to solve is K9, on the attached "Sample Output" sheet. Once I see how this cell works, I can figure out the rest. This cell is looking for the number of loans that funded in October 2013, from ABC Lending.
The filtered results are located on the "SCORE Data" sheet. The filter is already configured to only show results for ABC Lending, and the relevant column is labeled "Funded" (column "I"). Since the "Sample Output" sheet is looking for loans that funded in that month, and not a specific date, I created column "U" on the "SCORE Data" sheet, to convert specific day-dates to month-dates.
I have used the snippet of code below many times to delete rows of filtered data. For example, if I want to delete all rows containing "Y" in column F, this code would filter to that criteria, offset it to save the column headings, resize it to avoid deleting the row below the range, then delete the rows. This works beautifully, until I ran into an instance where there were NO "Y"'s in column F. Then it deleted the column headings.
How would I modify the code below to leave the headings in row 1, but delete any other filtered data? (Also, if there's a better way to delete filtered rows but leave headings, I would be interested.)
I have a DATA sheet that is all of the information reported on a monthly basis. This format will never change, but the data will. I have a second sheet called MMUSAGE.
On the MMUSAGE tab, I have identified which headers (in red) from the DATA tab that correspond with the headers in the MMUSAGE tab. Question is: how do I move the data from the DATA tab over to the MMUSAGE tab under the appropriate headers?
Example: IF Product Number on Worksheet(DATA) = Product Code on Worksheet(MMUSAGE) then move all data to Column L.
I came up with some formulas to count my data monthly. I have 12 tables with this kind of formula in it:
[Code] ....
Where B12 is the year and A213 is my month number. My first try on the "date filter" looked like that:
[Code] .........
And it wasn't working so I thought it was because the 31 wasn't a good idea for non-31-days-months but none of the formulas above are working.
(BTW, IDK why it's not working but I have data in my table for months 10, 11 and 12 and the only calculation tables that are calculating data are the ones for months 9 and 10. The results are the same in these two tables and are counting all my Table1[Data1] and [Data2] (the count is not monthly))
I have a filtered worksheet -WB1 (filtered by Column "B"). I want to count the number of cells or rows in column "B"(Only the filtered ones) of WB1. Copy out that exact number of cells from another workbook(WB2) from the bottom moving up(Column "A") and paste it into WB1 column "I".
WB1 - Count Filtered Cell/Row with reference to Column "B" WB2 - copy Cell count bottom to top of Column "A" WB1 - Paste into Column "I"
I have a userform with two listboxes in them, i have set the columns in the listbox to 9 and would like to populate the column headers in the listboxes with the column header of one of the sheets.
I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I have a nice little code which imports data from a mastersheet to my input sheet. Though it will only work as long as the mastersheet is static.
I'm trying to match the product code in column A between my mastersheet and my workbook with a input sheet. And then copy the cell value in column D and E of the relevant row.
The messy part is that some of the products are split into sub categories (less than :$$$:, between :$$$: etc) and they dont have any info in column A.
I'm unsure if this is doable. Is it? And if I get permission to edit the mastersheet somewhat.
I tossed in the start of my currect static c/p, thought I don't think I'm keeping it if I get a handle on this match macro issue.
Code: Dim ws As Worksheet, wb As Workbook, t As Date, wb1 As Workbook, wb2 As Workbook, wbName As String, janei As String, spm As String Dim fil Set wb1 = ActiveWorkbook ChDir ""
How we can select specific cells in the filtered data using VBA in Excel 2010.
I need to select 10th column, 5th row data .. or 10th column, 6th row data .. or 13th column, 8th row data...
How to select this data using VBA.. I am struck here .. If I give the below code.. the hidden cells inbetween the filtered data is getting selected.. only the first row is getting selected correctly.. i.e, ..rnVisible(1, 2).Select .. If I change the row like rnVisible(2, 12).Select its selecting the hidden cells ..
Dim rnVisible As Range Set rnVisible = ActiveSheet.Rows("2:10000").SpecialCells(xlCellTypeVisible) rnVisible(2, 12).Select MsgBox ActiveCell.Address
I cannot get various formulas (Countif, Match, Frequency, Etc) to work properly.
I am trying to arrive at a total number of matches of numbers in cell range B1:G1 with any numbers entered into the cell range of K1:P11 and have the total of matches display in cell H1. However I do not want to count duplicate numbers from the K1:P11 cells. (if the number 5 in posted in K1:P11 multiple times I only need it reported once in H1)
B1:G1 is the constant and the numbers will not change - K1:P11 cells will be populated by adding numbers until the all the numbers in B1:G1 is completed and match.
I have made a spreadhseet that track what games an official referees (sheet 1), what games they are touch judge 1 for (Sheet 2) and what games they are touch judge 2 for (sheet 3).
Sheet 4 then adds all these up for me and tells me as an good approximate estimate how much each official should get paid in way of expenses.
Simple enough so far.
I have a list of 3 letter codes on sheet 4 for each official that I put in the matrix of games. It's using these 3 letter codes that it adds it all up. This works fine
How can I get it to tell me if any 3 letter codes entered into the matrix (Sheet 1!D4:CD82) Do not match my list (Sheet 4!A5:A71). (an error detection system if you like).
To make it more interesting I would like it to ignore blank cells (games not played yet).
I'm not bad on excel formulas, but I can't get my head around how to do this.
I’m currently pulling data into two columns labeled “Monthly” & “Non-Monthly” respectively. They indicate work orders with a frequency of “Monthly” or “Non-Monthly”
The Monthly data is obtained using the following formula:....
I want it to count and fill in a range in column A until it sees a blank or notices the change in value in column B. In the example below i hope it shows what i need to do. i left the last group without numbers to show that is where it needs to start counting over again. i am basically wanting to count down 1st place 2nd place etc.
I'm trying to count the number of cells that contain a date in a filtered row. I've been using the following formula, but it keeps coming back with a value of 0, even though there are 3 in the filtered row;
I’ve got following formula counting different kind shoes that are black and sneakers and above formula work very well. What I wonder is if you can convert above formula to count these items in a filtered list. Could you use the subtotal-function in any way?
I need to sum a specific range of values between two headers in several dynamic sheets. The values in the sheets always starts in row 10 and column H (Forcast). For example the header could be "Sales" in column A. Then I want to sum values above the header "Sales" in forcast column H. The next header could be "Operations", where I want to sum the values between "Sales" and "Operations" in column H. Next header could be "Rents" then I want to sum the values between "Operations" and "Rents" in column H, and this is how it continues... Is there any macros for this?
I'm trying to get a forumla to tell me if a filtered column is showing a unique entry.
suppose column A has as follows
A1 - Bob A2 - Bob A3 - Sam A4 - Bob A5 - Sam
Now, if I filter by ANY column, I want to have a formula that will tell me if the filtered/visible name(s) in column A is only 1 name. Mind you, if the user filters by criteria in a another column, the unique name may show in column A, only once or multiple times depending on how the other column is filtered.
I've tried count, counta, countif and such but doesn't seem to deal with what I am trying to do.
I'm trying to calculate the number of rows in a matrix that have a complete row of data. I would noprmally do this using nested if formuals and a count function, but the columns of the matrix are filterable so the count won't work.
Is there a combination of functions that will adapt as I filter data?
I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
I have a fairly large spread sheet where I need to count the number of instances where the number in one column matches the number adjacent to it in a second column.
I have a sheet with data which is all sorted by columns.
What I want to be able to count the occurrence of an instance when 2 cells in the same row (but in different columns) match my given criteria.
Ive been using 'countif' to count the instances in a single column and I am now aware that this is about all it can be used for.
An example of my data is:
A B 1 a 1 a 1 c 2 d 2 c 3 b 3 b 3 c 3 d
What I want to be able to count for example is how many times '3' & 'b' occur on the same row (in this case the answer would be 2).
Im not very good with pivot tables and have tried but have not managed to find an answer. I really hope that someone can help as Ive been working on this probelm for days and quite frankly its doing my head in :-)
I have a table which is refreshed from a view on our SQL server. I use a part of this data further on and would like to automate the following: I would like to have a range set which I can use to loop through data. The range should hold the filtered data of table "PremiumTable", the columns "Grouping2", "Price", "Grower"
I have found a couple of posts giving the ability to create a range of visible cells and specific columns, but I wasn't able to combine this yet.
Is it possible to copy data that has been filtered on one tab into filtered data on another tab? I've attached an example, i'm trying to copy the values from column C on the 'From' tab to column D on the 'To' tab. I think the data is always going to be an exact fit in terms of the number of cells copied from and to.
My task is to combine two large databases into one spreadsheet by extending the number of columns. The data from each database is 90% matching based on an identification number, however occasionally there are additional rows or unmatched identification numbers that need to be kept for analysis.
When this happens, there needs to be a blank row inserted to represent the missing data in the rest of the corresponding row.
I am having trouble finding a quick way to do this because I have approximately 12,000 rows (and columns up to DV when combined).
for example:
p1 data data data data p2 data data data data
[Code] .....
needs to become:
p1 data data data data
[Code] .....
I am guessing I will need a macro of sorts, So far I have made one column that tell me if the ID's are matching or not (1 or 0) and if they are not matching (0) I manually insert the rest of the row that is missing or make space for the duplicate data (which needs to remain).
I have a table of yearly totals for the amount spent by x. I also have a growth rate for each month so for example in 2001 in jan the growth rate might have been 0.3% and feb 0.5% What I want to do is for each month based on the growth rate and the total produce a value for each month which sum to the total amount. It's also important to note that it restarts each year.
I have two tables, Table1 one has only customer codes in it, and I have Table2 with plenty of customer codes and those customer name, surname, age, location...
And I want to match and copy each of those customer codes in Table 1 all the information which is on Table2
Table 1: 50025 50026 50086
Table 2: Considering that name, age and location is each in separate cell
I have student demographic data, then I have to track how each student did on each question, but each question also corresponds to a reading standard and I need to pull two pieces of info from that. How they scored on the assessment (# of answers correct), and if they missed a certain standard twice or more (There are 4 instances of StandardA in the test and they had wrong answers on 2 or more of them). I have the solution to the first part. I entered the results of each question as a 1 for correct and 2 for incorrect then did a countif and only counted the 1s. I am stumped on getting an analysis of how each student did on the indicators. Since the indicators can occur more than once, generating a pviot table doesn't work in this instance, it'll count of 1s and 2s for StandardA, StandardA2, StandardA3, etc. and not the counts of 1s and 2 for all instances of StandardA.
Example:
What I want:
For student Bob - Number of times he answered incorrectly StandardA, StandardB, StandardC, StandardD, etc.............
Types: close to 4,000 total cells in the column with multiple repeats Amounts: Obvious Names: Only 6 available names (i.e. Tom, Bill, Fred, Richard, Sam, Alex)
It looks like this:
Type Amount Name Type 1 | $$$$ | Tom Type 1 | $$$$ | Bill Type 2 | $$$$ | Fred Type 3 | $$$$ | Richard Type 3 | $$$$ | Tom Type 3 | $$$$ | Sam Type 3 | $$$$ | Alex Type 4 | $$$$ | Fred
What I want to do is create a table with the parameters using the information contained in the previous table:
Type Tom Bill Fred Richard Sam Alex Type 1 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$ Type 2 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$ Type 3 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$ Type 4 | $$$$ $$$$ $$$$ $$$$ $$$$ $$$$
Is there any way to convert the first table to the second table? I'm using Mac OS/X
I am doing a simple count and it returns a value of zero.
I am wanting column D that equals "Macro" to return the number of rows that column D has Macro in it? I used = Count and I used = sumproduct and =count returned me a zero value and there are several hundred rows that meet that criteria and =sumproduct returned a zero value as well????? What am I doing wrong? Is it so simple that I'm missing something?
