I need to create a function that adds a predetermined amount (lets say 120) to a cell (lets say A1) every time another cell (lets say B1) reaches a 10 (like 10,20,30,40 etc)
Lets say the B1 is 30, i need A1 to recognize that it needs to show 360 as its value (adding 120 for every 10 of B1)
how to create a function in VBA that works exactly as SUMIF, except it will also add a comment in the cell that references the formula, where the comment would be a list of the individual cells being added? Basically the comment would read "2+4+5+6" or "2,4,5,6" or something along that.
View 1 Replies View Relatedi had a basic spreadsheet for my incomings and i got wiped with my hd exploding!! i know how much the total was i just need a way of creating a list of random amounts within a specified range over a year to give to my accountant.
I don't think there is such a function but is there a way that I can have a function that constantly adds the numbers in a column and when the sum of 240 is reached it adds 30. I need it to do this only once and not keep adding at every 240 point.
View 2 Replies View Related=COUNTIF(F3:F38,"=VL") This works for totaling the VL in the cells in the column but what if I need it to add DVL in the same column to that total? So I need it to add both VL AND DVL as one total. I can make it add one or the other but not both
VL DVL
VL VL
VL
VL
VL
5 2
I am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
what function can i use to calculate how much i should borrow when i know what the interest rate is, the length of the loan and the max amount i can pay back per month?
View 9 Replies View RelatedI have 3 fields:
Person, FinancialYear, AmountUSD
Pete, FY12, 8000
Pete, FY13, 7000
Jeff, FY12, 5000
Jeff, FY13, 5500
Sam, FY12, 4000
Sam, FY13, 3500
How to create a pivot table that has a calculated field for the difference in AmountUSD between FY12 and FY13 (for each person).
I'm trying to create a pivot in 2010, which gathers a cumulative amount from data sources within two different worksheets.
View 2 Replies View RelatedI have a listbox to select 1 of 15 items. This selection will allow me to access the proper portion of my data. I want to use this number to concatenate the result * predetermined number to access a cell.
Ex
If result from listbox is
if 1 then I want to access data from cell AA7
if 2 then I want to access data from cell AA99
etc.
I can create the cell I want using the code
="AA"&Y2
but what function do I use to call for the cell?
I have 800 rows of patient information, I need to sample 70 patients. I used the Random.org randomizer to get my 70 patients. That randomizer only gives me the line numbers such as 1, 8, 23, 45, 70, etc. I then need to go to Excel and just pick out the patients on those lines I was given above. Is there an easy way in Excel to have my spreadsheet of the 800 rows and create a (simple) calculation that will pick out the line numbers that I need all at once, so I do not have to go thru manually and choose the data from row 1, 8, 23, 45 etc to make my new spreadsheet with only my sample patients on it. OR is there a easy way to pick 70 random lines from a spreasheet..
View 1 Replies View RelatedCell A1: can contain any number between 1 and 4 (with two decimal places, i.e. 2.36 or 3.99)
Cell A2: based on what number is in A1, this field should return corresponding percentage (%), based on the following criteria:
1: is 100%
2.99: 1%
3 (including) and less (all the way to 4): 0%
Note: percentages between values 1 and 2.99 are equally spread
So let's say, when:
A1 is 1.00, then A2 should return 100%
A1 is 3.26, then A2 should return 0%
A1: is 1.25, then A2 should return 92% (or whatever percentage is correct based on above described criteria)
I am trying to insert three columns within a large amount of data. I am using Excel 2003 edition. The three columns need to measure max, min, and standard deviation of month long ranges and the data goes all the way back to 1993.
Currently, I have a column that has the correct ranges but finds the average for each month
(=AVERAGE($H7214:$H7243))...
And many more ranges as it dates back all the way to '93. Is there a possible way to insert these three columns with their respective commands (=MAX... =MIN... etc.) while keeping all the ranges from the AVERAGE column.
In effect, I am looking to solely switch the begining of the column command
(=AVERAGE($H7214:$H7243)) to (=MIN($H7214:$H7243) etc...
While keeping all of the specified ranges from the AVERAGE column.
See example attached. I am building a form where a user need to provide different criteria to receive a specific hourly rate. Conditions are:-
1. Age
2. A / B / C / D
3. Weekend (W) or Mid Week (M)
There are 4 age groups, 4 categories (A,B etc) and 2 Daily rates, therefore there are 32 different possible rates. I have considered nested if statements but I think this would be a very long formula - is this the only answer?
I am using a macro that automatically updates data obtained through a DDE link at 5 second intervals. My code is based off of the article "Automatically Run Macros at a Set Time or Date" found on the Ozgrid FAQs found here: http://www.ozgrid.com/Excel/run-macro-on-time.htm
However, I have this macro execute when I activate a Form Button, not when the workbook opens. So far, this macro works perfectly, and I have no problems. Although, I'd also like to include a Form button to STOP the macro from automatically running if the user chose to do so. How exactly would I go about making this STOP button?
I need a formula to calculate the amount due based on cumulative sales once a breakpoint amount is reached.
Example:
Breakpoint:
cum sales are > 500 pay at 3%
cum sales are >1,000 pay at 2%
month/ sales/ cumul sales/ amount due
jan/ 100.00/ 100.00/ 0
feb/ 600.00/ 700.00/ 6.00
mar/ 600.00/ 1,300.00/ 18.00
and so on...until the end of year.
I tried using an if formula by could not get it to work.
Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do:
I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
Ok, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
I tried this but it's not working:
=IF(C3="0","",C3-C2)
For the below macro.
ABCDG
CodeTotalBaseNetA1 = 20%
A110083.3316.67A2 = 10%
A2350318.1831.82A3 = 7%
A3220205.6114.39A0 = 20%
A015015030
A1 is the code, take the total(B) and calculate the base(C) on the percentage given in the G, net = B-C. for A2 and A3 it is the same process.
For A0 the total (B) is equal to Base(C) and calculate the net on the given percentage in G.
I want to create a column where the user can input ANY data (number, symbol, letter, etc.) and create a sum. Basically, I want to be able to add "checkmarks" where the checks have a predetermined value based on the column the check is placed.
View 5 Replies View RelatedI'm providing a tool for users that:
- allows the user to select Y / N for multiple criteria
- based on the criteria, calculations are made
- based on the criteria and the calculations, totals are calculated
Here's the formula that's currently NOT working for me . . .
=IF($M8="y",$M12*V$9,IF($M8="N",0)+IF($N8="y",$N12*V$9,IF($N8="N",0))+IF($O8="y",$O12*V$9,IF($O8="N",0)
+IF($P8="y",$P12*V$9,IF($P8="N",0)+IF($Q8="y",$Q12*V$9,IF($Q8="N",0)+IF($R8="y",$R12*V$9,IF($R8="N",0)
+IF($S8="y",$S12*V$9,IF($S8="N",0)+IF($T8="y",$T12*V$9,IF($T8="N",0))))))))
Currently, returns a value of '14' -- shown in the visual provided, should be a value of '21.'
all the data from the form is successfully placed into the assigned work sheet.
My question is
What is the code i have to Assign so it automatically adds a row down?
right now it adds the info but every time I try and put something new it overrides what was placed before..
I have a spreadsheet for my local camera club that needs a few "IF" formulas that I have not a clue at how to accomplish. I have done the rest of the spreadsheet.
The formula needs to be
IF cell A1 = 22 or 23 or 24 (a manually entered number) then the answer = 1
IF cell A1 = 25 or 26 or 27 (a manually entered number) then the answer = 2
Also need another IF formula that adds up various cells: A1 + A2 + A3 + A4 and then adds the same cells on a 2nd and 3rd worksheet, and if the total is zero, then the cell will remain blank in the answer field, rather than having a zero in it.
Is there a formula or a function that adds up all of the sums in a row.
******** ******************** ************************************************************************>Microsoft Excel - Book4___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA14=ABCD14603 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have a macro launched from a command button that sometimes puts a bar at the left side of the window. When it executes the line Sheets("graph").Select the first line in the macro it puts the bar at the right side of the window. The characteristics of the bar are:
1) It is associated with the main excel window - if you minimize the window containing the worsheet the bar is still visible
2) It is one of two widths, about 1/4" or about 2.5"
3) If you move an Excel toolbar to the left side of the screen the bar disappears. If you move the toolbar back to the top of the page it doesn't return but it can appear the next time you run the macro.
4) It only appears some times you run the macro - I can go days without seeing this problem and then it happens every time I run the macro.
In column A, I have numbers ranging from 0-6. In column B, I would like to create a "Y" each time there is a 1 or 2 in column A. How can I create an IF function which will create a Y for a 1 or 2?
View 4 Replies View RelatedI currently have the below in my VBA which adds the text to the subject of an email:
Application.Text(today - 1, "MM-DD-YY")
today = Int(Now()) is part of the macro. How do i format this to display workdays only.
For instance if today is 07/21 (monday) i need this to display 07/18 vs 07/20.
In excel that function would be =WORKDAY(A1,-1) where A1 is =Today(), just not sure how to translate this to VBA.
i have a list of parts that adds up and shows a total at the bottom (great, works perfectly)
in the next column i have a percentage (margin) which again works perfect
ie.
Col A Col B Col C Col D Col E
1 ENGINE 4500 5000 11%
2 SURCHARGE 1800 2000 22%
3 OIL 1 2 100%
Totals 6301 7202 ??%
what i would like to do (forgive me if i have missed something) is for the total value in colum D to add up but for the % in column E not to be included in the total %
Is it possible to have a situation that when the word"SURCHARGE" is in the row then the % will not be added to the total %
In other words i need the surcharge price to be included into the final price, but the surcharge would give me a false figure so that needs not to be included in the total %
I am trying to subtract an amount from a cell until it reaches 0, then move and subtract from the next amount, and so on.
AmountFixed BudgetedResult53.50Subtracted 5 tell it hit zero1.30Subtracted remaining amount until zero43.8Subtracted remaining amount until zero3.8 was left over without hitting zero is good. Is there formula for this?
I am trying to create a scale using IF functions in Excel.
I have a row of numbers that I want to convert to my scale. My scale is fairly simple, less than 1 =1 and more than 10 = 1
After that, any number between 1-2 gets a 10, any number between 2-3 gets a 9, any number between 3-4 gets a 8, etc.
So, what I have done is take a logic if-then function and applied it to my row of numbers. It looks something like this:
=IF(2<D2<3,9)
However, this doesn't work. I have a number (2.55), and instead of showing a 9, it says FALSE. I am pretty sure 2.55 falls between 2 and 3 on the scale. Why won't it work?
Also, is there any way to create a function where I could put each of my if/then functions to create my whole scale? Right now I just have 10 separate columns for each number on my scale.