I have a listbox to select 1 of 15 items. This selection will allow me to access the proper portion of my data. I want to use this number to concatenate the result * predetermined number to access a cell.
Ex
If result from listbox is
if 1 then I want to access data from cell AA7
if 2 then I want to access data from cell AA99
etc.
I can create the cell I want using the code
="AA"&Y2
but what function do I use to call for the cell?
I need to create a function that adds a predetermined amount (lets say 120) to a cell (lets say A1) every time another cell (lets say B1) reaches a 10 (like 10,20,30,40 etc)
Lets say the B1 is 30, i need A1 to recognize that it needs to show 360 as its value (adding 120 for every 10 of B1)
I have 800 rows of patient information, I need to sample 70 patients. I used the Random.org randomizer to get my 70 patients. That randomizer only gives me the line numbers such as 1, 8, 23, 45, 70, etc. I then need to go to Excel and just pick out the patients on those lines I was given above. Is there an easy way in Excel to have my spreadsheet of the 800 rows and create a (simple) calculation that will pick out the line numbers that I need all at once, so I do not have to go thru manually and choose the data from row 1, 8, 23, 45 etc to make my new spreadsheet with only my sample patients on it. OR is there a easy way to pick 70 random lines from a spreasheet..
View 1 Replies View RelatedCell A1: can contain any number between 1 and 4 (with two decimal places, i.e. 2.36 or 3.99)
Cell A2: based on what number is in A1, this field should return corresponding percentage (%), based on the following criteria:
1: is 100%
2.99: 1%
3 (including) and less (all the way to 4): 0%
Note: percentages between values 1 and 2.99 are equally spread
So let's say, when:
A1 is 1.00, then A2 should return 100%
A1 is 3.26, then A2 should return 0%
A1: is 1.25, then A2 should return 92% (or whatever percentage is correct based on above described criteria)
See example attached. I am building a form where a user need to provide different criteria to receive a specific hourly rate. Conditions are:-
1. Age
2. A / B / C / D
3. Weekend (W) or Mid Week (M)
There are 4 age groups, 4 categories (A,B etc) and 2 Daily rates, therefore there are 32 different possible rates. I have considered nested if statements but I think this would be a very long formula - is this the only answer?
I am using a macro that automatically updates data obtained through a DDE link at 5 second intervals. My code is based off of the article "Automatically Run Macros at a Set Time or Date" found on the Ozgrid FAQs found here: http://www.ozgrid.com/Excel/run-macro-on-time.htm
However, I have this macro execute when I activate a Form Button, not when the workbook opens. So far, this macro works perfectly, and I have no problems. Although, I'd also like to include a Form button to STOP the macro from automatically running if the user chose to do so. How exactly would I go about making this STOP button?
I need a Userform for employee reports which should be accessible for everyone without any struck.If employees update their updates in that form it should be stored in the centralized Data base.Finally the data collection team will take the reports and updates from data base.
View 1 Replies View RelatedI am using Access as a backend and Excel as a frontend. I want to count total number of records for todays where Time<13:01
Modify the following code accordingly?
[Code] .....
Please see attached the Workbook. I need to check the policy Numbers in Column A to be present in Access Table. If yes then write the corresponding ScanDate and BatchNo in columns I and J.
Sun Project.xls‎
I am Generating Excel file with Macro using my asp.net (c#) application.
I am able to generate Excel file in development environment, but in Production it gives following error:
"Programmatic access to Visual Basic Project is not trusted Line: Microsoft Office Excel"
I did googling a bit and found that I have to open Excel file physically make few security related changes in macro as below.
1. Open the Office application in question. On the Tools menu, click Macro, and then click Security to open the Macro Security dialog box.
2. On the Trusted Sources tab, click to select the Trust access to Visual Basic Project check box to turn on access.
3. Click OK to apply the setting. You may need to restart the application for the code to run properly if you automate from a Component Object Model (COM) add-in or template.
Can i do above changes at runtime (using some code)?
I want to create a column where the user can input ANY data (number, symbol, letter, etc.) and create a sum. Basically, I want to be able to add "checkmarks" where the checks have a predetermined value based on the column the check is placed.
View 5 Replies View RelatedI have an Excel file ( named "Classes.xsl"), that has a worksheet (named "RawData") that is layed out something like:
Name Dept Class
John 0547 Class 1
Jane 0368 Class 1
Jim 0368 Class 2
Sue 1235 Class 2
I am trying to get an Access-Like report without utilizing Access. Is there a way to generate a report similar to below using Excel as the data source (could be mail merge, perhaps a macro with a printout) I am not sure which way to try and was hoping someone could point me in the right direction...and possibly provide an example.
Class EnrollmentClass 1John 0547
Jane 0368Class 2Jim 0368
Sue 1235
How can you access a cell's value via a vb variable that contains the cell's address. I have a vb variable named cellAddress (string) that contains "$A$1" and I want to assign the contents of what cellAddress points to another VB variable - how do i Do this?
e.g. if cellAddress = "$a$1" and A1 contains "xyz", I would like to assigne "xyz" to a new vaiable by referencing just cellAddress??? Also - Can anyone reccomend a good Excel VB book? A book that maybe stresses the VB language rather then a cook-book approach.
A cell is having some content eg. "This is MrExcel Forum". Now the user selects (By dragging the cursor or Shift + Arrow keys) - "is MrE".
Is there a way i can access only this selected data thru vba?
Something like when u select some text in a cell & right click > Look-up , the selected text shows up on the look-up box.
We have a program that creates a database for every order we make. The database has the same name for every order but it creates a different folder for each order. So my database name is constant but the folder is different for each order. I have the following macro that works ...
View 9 Replies View RelatedI am trying to add a button on my spreadsheet that will give the person Access to one cell only. The cell in its normal state is Locked. The cell is ALWAYS in Column F of a sheet titled Master. The button is located on the sheet titled Master.
The real problem may arise in that once the person has access to the cell and they make their changes I need that cell to return to being Locked and the sheet once again Protected with Filtering.
Does this make sense to anyone? Can it be done and if so any suggestions?
I'm looking for a complete working example of how to write a single cell to a Access table using a SQL command. More to the point, i'm looking to UPDATE an access table field with a certain record ID with the current contents of a cell. I am using Excel 2003.
I would be most thankful you give you permission to marry my daughter.
Is it possible to use cell references to define parameters in an SQL query to an MS Access database?
I assumed it was similar to using SQL but I'm getting an error in excel.
Here is my query: .....
The error I get in excel is: "Invalid character value for cast specification" and it wont let me specify a cell.
Using Microsoft ® Office Excel 2003 (11.8220.8221) SP3, I started with a sheet, Sheet7, that pulled the first non-blank error message found in a common cell (i.e., A7) in Sheet3.1, Sheet3.2, ... , Sheet3.15, Sheet3.16. All of these sheets resided in a single workbook, and worked correctly using the following VBA code snippet:
View 5 Replies View RelatedSAMPLE FILE "error_finder.xlsx (36.5 KB)" attached...
The VP of our company needs me to create a spreadsheet.
For this s/s I need the following:
Imagine 2 sheets in Excel...
sheet1
sheet2
sheet2 has sequential numbers in column1 starting in row2 with the number 1 until wherever..., so cell A2 has number 1, cell A3 has number 2, etc...
Manually, a user has to fill in certain text next to a number.
This for example would look something like this:
_|A| B
-|-|-----------------------------------|
1| | Error-description
-|-|-----------------------------------|
2|1| Whatever the 1st error would be...|
-|-|-----------------------------------|
3|2| Whatever the 2nd error would be...|
-|-|-----------------------------------|
4|3| Whatever the 3rd error would be...|
-|-|-----------------------------------|
5|4|
-|-|-----------------------------------|
6|5|
-|-|-----------------------------------|
and so on...
All this would be on sheet2
In a cell on sheet1 I now need the number from column A displayed, that has the latest entry in column B.
In the example above this would have to be the number 3 in cell A4, because right next to it (in cell B4) is the last entry "Whatever the third error would be..."
Addition: There are several sheets, each sheet stands for one error listed on sheet1 in column A
sheet1 for example would look like this:
_|____A____|_B_|_C_|_D_|
-|---------|---|---|---|
1|_________|833|933|934|
-|---------|---|---|---|
2| error 1 |___|___|___|
-|---------|---|---|---|
3| error 2 |___|___|___|
-|---------|---|---|---|
4| error 3 |___|___| 3 |
-|---------|---|---|---|
In this example, because "whatever error" (cell B2 to B4 on sheet2) was found on press 934 was the 3rd error (cell A4), the number 3 (cell A4) would have to be populated on sheet1 in cell D4.
I have my ms access and ms excel which is connected each other .
=> now in my ms access have a table name (tblMonth) has columns (year,MonthNum,StartDate,EndDate)
HERE: sample in january(1) and feb(2)
YearMonthNum StartDate EndDate
2014 130/12/201305/01/2014
2014 106/01/201412/01/2014
2014 1 13/01/201419/01/2014
2014 120/01/201426/01/2014
2014 127/01/201402/02/2014
2014 203/02/201409/02/2014
2014 2 10/02/2014 16/02/2014
2014 217/02/201423/02/2014
2014 224/02/201402/03/2014
=> and for my ms excel has its columns (year,month,date) in this if i input the date that is base in the database range from StartDate TO its EndDate will automatically put the month and year which base also in my database (year,MonthNum)
HERE:
A1 B1 C1
Year Month Date
A2=2014 B2=January C2=01/01/2014
I have a master spreadsheet that houses most of the information that remains in my control, and several other user spreadsheets that update cells from that master through links.
I am having some problems lately with users doubleclicking the locked linked cells in their workbooks, and excel then wanting to open and give the user access to my master spreadsheet. Is there a way to disable this feature? I would like it to not even acknowledge the action if that's even possible because it confuses them as to why they are getting a prompt to open another document.
Cell A1 = 3
Cell A2 = 4
Is there a formula to calculate
(3*4)+(2*4)+(1*4)
I need to multiply every integer less than the number in cell A1 and greater than zero by the number cell in A2. I was thinking factorial, but that's not it... Can't remember from my math days.
I have numbers in b2 to b5 say
10
22
35
50
I have numbers in c2 to c5 say
1000
1580
3000
45000
I have numbers in cells d1 to kq1 (1 to 300) d1=1, e1=2, f1=3 and so on
What I want to do is:
In D2 through to kq2 it puts the number in to the cell that correspnds to a multiple of the number in b2.
That would put 1000 in cells m2,w2,ag2,aq2, ba2 and so on
In D3 through to kg3 it it puts the number in to the cell that corresponds to a multiple of the number in b3
that would put 1580 in cells y3,au3,bq3,cm3,di3 and so on
Trying to have a formula assign a number to a cell depending on a number in that cell.
Example
In all cells in a range from C8 to G13, if there is a 1, i want the number in C20 to show, if there is a 2, whats in
D20, 3/E20, 4/F20, 5/G20, 6/H20
I'm making a Excel 2013 spreadsheet that has formula in a column that auto enters a number 1-40 when something is entered to the left of that cell. There are 300 rows in the spreadsheet. I would like to make a drop down list in a column cell to the right that would delete that number in that cell from the drop down list. For example cell C1 has 39, that 39 then is deleted from the drop down list. C2 has 22 in it, click on the drop down list cell and it shows 1-40 less 39 and 22.
View 11 Replies View RelatedLooking for a way to search an active cell (that has been found using macro) for numerical data and if there is some present paste this in a different location
If there is no numerical data in this this cell then paste a 0 in a different location
An example of the string contained in the cell
Product 7.5% wheat <- i would want 7.5 (or 7.5%) copied to a different cell
or
Product X <- i would want a 0 copied to the cell the 7.5 would be in from the above
I can find the cell to search in, i just do not know the correct way to extract the information I need.
I have Sheet with 40 employees who each proposes their work schedule, so I have to give each Employee access to the same sheet and want highlight and unlock only those cells that specific employee can use.
Each employee has to login from a drop-down (sourced from Sheet.Employee Master), so their unique Employee Number is in "A13" of Sheet.LOGIN
Can I identify the ROW number and then use that ROW number in a macro to highlight and unlock specific Range of Cells in Sheet.PROPOSED SCHEDULE?
---where "Sheet.LOGIN("A13") = (the value in the cell Col A:"row" of Sheet.PROPOSED SCHEDULE)
I have attached a scaled down version of the Workbook.
Following code is scaled down-- this is for Employee 02 who appears on ROW 16 of the sheet. (macro is same for each employee, just uses a different row)
Create some sort of formula combination or macro that will: Recognise a cell with a value of 1, 2 or 3 in. If 3 is in the cell, the cell to its left will be counted and added to a total. If the cell that has 3 in changes the value is removed from the total. Ive tried lots of methods but i cant figure this one out!
View 6 Replies View Relatedcan I set a cell in excel so that if a number in a different cell is above a certain number it will turn green and another cell to turn red. I have attached the file.
View 4 Replies View Related