The attached spreadsheet is an example of a report that is dumped into Excel. It is very messy and needs a lot of formatting. I would like to create a column for the highlighted contract numbers.the contract number changes with each header.
View 7 RepliesMy data is in colunm set #1. I want to create from the data set in column set 1 the data set shown in colunm set #2. I want to automate the process. The program needs to regognize if a name appears only once or more than once. If it appears more than once the data needs to be merged as I highlighted from yellow to green.
View 4 Replies View RelatedI have 2 columns full of information feeding from 2 different sources on our internet database
I would like to collect this information into 1 column to create a drop down list
As these are expanding tables feeding from the internet I don't think copy and paste into one column will work (I'm not sure about this but I would prefer a formula to avoid any issues).
I was going through a thread that is open now about a similar subject: Create Workbooks & Worksheets For Each Group In Table. I tried getting it to work myself but was unsuccessful. I want a code that will create a new workbook for every new Vendor. I tried doing it myself but was getting compile errors... If this is not what I should be using let me know, it works the way I want with just worksheets, i thought it would be an easy conversion to workbooks
Sub PagesByDescription()
Dim rRange As Range, rCell As Range
Dim wSheet As Worksheet
Dim wSheetStart As Worksheet
Dim strText As String
Set wSheetStart = ActiveSheet
wSheetStart.AutoFilterMode = False
'Set a range variable to the correct item column
Set rRange = Range("A1", Range("A65536").End(xlUp))
'Delete any sheet called "UniqueList"
'Turn off run time errors & delete alert
On Error Resume Next
Application.DisplayAlerts = False
Worksheets("UniqueList").Delete
'Add a sheet called "UniqueList"
Worksheets.Add().Name = "UniqueList".....................
Can I create a PivotTable with two columns of data for the same Column header?
I have created a PivotTable in Excel 2003 with months for rows and cities for columns. I would like to have TWO columns of data for each city. The two data columns are: Average House Selling Price, and Number of Houses Sold. When I put both of these data fields into the PivotTable Wizard, they are listed below each other so that each Month occupies two rows, but each city occupies one column. I want the two data fields beside each other so that each month only occupies one row, but there are two data columns for each City.
I am trying to seperate singlr column information into seperate column based on the name in the Data 1 column.
Ex.
Data1 Data2 Result 1 Result 2 Result 3
one100one100two200three1
one350one350two450three2
one500one500two600three4
two200
two450
two600
three165
three236
three450
I have a workbook that lists system analysts and information on the systems they're responsible for. I would like to have an Excel macro that will:
1. Create and name a new worksheet for each UNIQUE value in the 'Name' column (new worksheet for each analyst)
2. Copy their system info to each respective worksheet
I've attached a sample workbook.
I'm new to Excel (4th day in class) and I can't find the answer to what I'm looking for on the net. Part of the problem is that I don't know what to call it, so I have a hard time looking it up.
Very simply put, let's say there are examples numbers 1,2,3,4 put in cells A1 to A4 (vertical) and more example number 50,60,70,80 are put in cells A6 to D6 (horizontal)
What one formula can be written in B1 that I can copy down to B4 that will make B1=A1+A6, and B2=A2+B6, and B3=A3+C6, and B4=A4+D6
Is this possible? If
A B C
0 0 0
0 0 0
1 4 5
2 4 8
0 0 0
0 0 0
0 0 0
2 6 9
8 9 3
3 5 6
0 0 0
In the raw data, the 0s split up the data into different steps. I am trying to create a function that selects the data from the ABC column and puts it into new columns for each step. I.e:
New Columns with:
1 4 5
2 4 8
and
2 6 9
8 9 3
3 5 6
In the raw data files, there will be 10 steps, with a varying length of data.
I need to create a function that numbers rows with respect to data groups in a column (column labeled "Type" in this example). The result would be that shown in column A in this table.
How do I write the function?
#TypeName Date
1CarsJohn1/12/2008
2CarsJane11/10/2007
3CarsMary11/2/2004
4CarsBob12/7/2003
1TrucksMike12/12/2007
2TrucksSandy1/3/2007
3TrucksDale12/14/2006
4TrucksVince4/8/2005
*
I want to create a user defined function to search a column of data for a part number.
If it exists I want to have a the UDf returna "fail" otherwise "pass"
Here is the code I was trying to use
Function firstpass(SN As String) As String
ws = Worksheets("Defects")
c = ""
With ws.Range("a1:a9999")
Set c = .Find(SN, LookIn:=xlValues, lookat:=xlWhole)
End With
If Not c Is Nothing Then
firstpass = "Pass"
Else
firstpass = "Fail"
End If
End Function
This function only returns a "#value" and I don't quite know how to troubleshoot it.
I have a spreadsheet with a column showing dates (dd/mm/yyyy). I need the column next to it to display the month only (Jan,Feb etc).
How do I create a column to show the month only using the date column as a reference.
I have a form in which users will manually enter a date in Column A. I would like to create a formula in Column B which will add 4 days to the date based upon Column A. However, the 4 days should only be added to a select set of dates which I would like to specify. If the date is not found in this select set of dates, then the result in Column B should be the same date as Column A.
View 3 Replies View RelatedI was wondering, is there a function that would take, lets say, every 4th cell value from a column and create another column consisting of every 4th number ?
View 2 Replies View RelatedI need to put the order in the second column of the item that is in the first column.
In the last line item Computer is recorded for the third time.
MATERIALSSEQUENCEComputer1Computer2Mouse1Mouse2Computer3
I have a model built that calculates the daily Profit and loss ('Data for Pivot' tab, column M). I would like to calculate the cumulative profit and loss and am having a difficult time doing this with a simple formula. The Daily P/L column is empty (#NA value is in the cells) up until cell C138 as there is no data before that (which is the way it is supposed to be). However, once data has begun to be populated the daily profit and loss is shown (in this case from M138 onwards). The issue I am having is that I cannot seem to be able to create a formula that will capture the cumulative P/L. My desired result is evident in cells N179 onwards, as it simply captures the cumulative p/l. However, this only works if I change the formula once data is populated (in this case cell N177 is where i put in a new formula; the previous formula can be seen in cells N3-N176). If I attempt to put in the formula that is in cell N177 for all of the cells in column N, it gives me an error. Thus, I think that this may need to be programmed via VBA, but I have not been successful in doing this. The issue is that the data population in this model begins on different cells based on the different inputs that I put in ('Mov_Avg_Chart' tab, cells c6 and c8). Thus, I can't hard-code a formula based on a particular cell. If anyone can help me with this,
View 8 Replies View RelatedI have two columns(1 and 2), Column two will for each data set have two common values. For most of the data set where column two have the second common value, i can find it based on column 1, but where column 1 differs, i do not know how to get data based on column two.
See attached, column 1 and 2 data. Column 3 I took out one common value, column 4 I just did a IF function to populate blank spaces with common value, but for row 24 - 26 if does not work because column 1 does not follow same logic. Is there a way to populate a third column with one value(can be either of the two common values in column 2(note there will be multiple data sets)?
doc list.xlsx
I have a spreadsheet with up to 3000 rows. I have created a macro that subtotals column J and L based on changes in col. A. I now need to create a range beginning with column "A2" thru Column "D2" to last row of data in column a, but offset (-1,0) due to the Grand Total Row. I then have a macro to do a Go To Special to fill the blanks. I am having trouble because each month the number of rows will change.
View 3 Replies View Relatedi have an excel sheet ,i need every one use this sheet has to fill the spceific cell in one coloum and he couldn't save his editing without fill the requeired cell by pop up message let him know that he has to fill this cell and high light the cell for the user at the same time
View 2 Replies View RelatedI have seen this done before I need a Row with Attached sub rows IE... you can expand or close contents clicking a + or - see below
a b c d e f
1
2+ Omaha Office contents
6- Miami Office Contents
7 Computer inventory no.
8 Chair inventory no.
9 table inventory no.
10- Dallas Office Contents
11 Computer inventory no.
12 Printer inventory no.
13+ LA Office Contents
17+ Washinton Office Contents
I am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
I'm trying to reduce some manual labor that I do each month by figuring out a way to create additional tabs for every different "branch" within a given column from a master table. The branch numbers may not necessarily be the same each month as some old may go and some new ones may come.
I have attached two excel workbooks. One shows the master "Data Table" and the other shows what I want it to look like "After Sorting". As you can see, I have to create a separate tab for each of the branches listed in column A on the master table. This becomes really cumbersome, especially when we really have about 20 branches but I'm only using these 6 for the example.
Data Table.xlsxAfter Sorting.xlsx
Time. What formula do I use?
6:30AfterBreakfast
7:30AfterBreakfast
8:00AfterBreakfast
8:30AfterBreakfast
9:00AfterBreakfast
9:30AfterBreakfast
10:00Before Lunch
11:00Before Lunch
12:00Before Lunch
13:00Before Lunch
14:00Before Lunch
14:30After Lunch
14:45After Lunch
15:00After Lunch
16:00After Lunch
17:00After Lunch
18:00After Lunch
18:30After Dinner
18:45After Dinner
19:00After Dinner
19:30After Dinner
I want to create a row for each of the 52 weeks in a year. I want the weeks to begin and end on thursdays. Is there a way to automate this so that I do not have to maunally enter in each week? I need to do this for 2008 and 2009.
For example
7/31/08 - 8/7/08
8/7/08 - 8/14/08
8/14/08 - 8/21/08
etc....
Basically what I want to do is take any value that isnt "0" in column F and place it in another column in a nicely formatted table. So basically get rid of all the zeros...
Im sure this has been done and asked before but I have no idea what to search for or if there is some easy forumla in excel for situations like this.
How to create a column that has ascending values ie: increment of 1 eg. 1,2,3,4,5,6 ......
View 2 Replies View RelatedI have a spreadsheet with these columns:Group_Name
Contact Name
Company Name
Contact ID
Situation:
The Group Name Column has the name of the group that the Contact Name is a member of. The Contact Name could be a member of many Group Names and therefore there may be many rows of the same Contact Name one with each Group Name that they are a member of. I have manually created separate columns for each Group Name in the spreadsheet that is attached.
Goal:
I would like to have a macro that will look at the Group Name column and create a new column for each distinct group. I then would like the macro to go down the Contact Name column (I believe that I will have to have it sorted)and look at the Group Name that is listed in that row and put "True" in the Group Column that was created in the above step. Then, go to the next row, if the Contact Name is the same, look that the Group Name column and put "True" in the corresponding Group Column in the FIRST ROW OF THAT CONTACT NAME. Then Delete that row.
I have a spreadsheet that I use to populate a MySql database. It has a hierarchical relationship in the spreadsheet which is accomplished through a column called GUID and another column called Parent GUID. I've been using a website to generate GUIDs for me and pasting them into the first column one at a time, then copying to the second column where necessary. It takes forever.
So, I'm wondering if I can write (or better - paste!) a function that will automatically generate the first column of GUIDs. I've googled and found several functions that create a guid, but I don't really understand how to call the function from excel. Also, I don't want to manually call it thousands of times. I'd just like to call it once and have it generate GUIDs for the entire column.
I'll still copy and paste to fill in the Parent GUID column.