I have a calculator and I am trying to set a macro that will take the cells highlighted copy them to another sheet, change the format to standard( no background color) make the data fit in one page and print it.
this is what I got so far:
Sub Set_Print()
'
' Set_Print Macro
' set printing area and print
[Code]......
Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies View RelatedI have a problem when I want to print, it will only print a set area. How to I make it print everything, so it prints everything till the last letter on the page?
View 10 Replies View RelatedWithin one worksheet: Is there a way to apply page numbers and/or footers only to a print area so that if I change the print area the page numbers will begin at 1 again.
View 1 Replies View RelatedMy macro "prints" (saves) my sheet as Pdf-file.
I wish to improve this such as print/save is based on the active area I choose at the time.
Now I must hide a lot of columns (show only the ones I will print) before "printing":
Columns("A:Z").Select
ActiveSheet.PageSetup.PrintArea = "$A:$Z"
I just want to select some columns and set this range as a print.setup area.
I am trying to write a macro that publishes the print area as a non-interactive web-page to a file that sits in the same location as the spreadsheet from which the macro is being run.
I am using the the following macro:
I am trying to dynamically set my print area and page breaks on a large sheet.
Basically I want to get the last column and last row in used in the sheet. And to create boxes (24x30) until I get all the way horizontally and vertically.
I have a workbook with multiple sheets that I need to print.
Is there a way to create a fixed print area within which you can mess around with formatting without extending or shrinking the print area?
I have tried adjusting the margins settings so that they are all the same, but this does nothing to keep a fixed print area.
Once a user of my workbook has input various price levels on the Input Page, the data is sorted on the output page. As the data on the Output Page is quite vast and not all of it is relevant on a particular day, the user is interested in just printing a certain range of data that are in 5 columns. I am trying to figure out how to set up a macro that will allow the user to enter into an Input Box the range to print (ie. Cells C25:G60).
I found one example on this site listed below that allows one to do that but I would like to make it more user friendly. I do not want to make the user have to write out Excel cooridinates. Specifically by allowing the user to input in the Input Box a High price level in Column C and a Low Price level in Column C ; The macro will look in Column C for the highest instance of this High Price and begin the range down to the last instance of the Low Price (there can be several instances of the exact price level.) The macro would then create the print preview of the cells Cxx:Gyy.
Sub SelectPrintArea()
Dim PrintThis As Range
ActiveSheet.PageSetup.PrintArea = ""
Set PrintThis = Application.InputBox _
(Prompt:="Select the Print Range", Title:="Select", Type:=8)
PrintThis.Select
Selection.Name = "NewPrint"
ActiveSheet.PageSetup.PrintArea = "NewPrint"
ActiveSheet.PrintPreview
End Sub
I have multiple data validations with input messages. For the new user, this is handy, but for the person that does this a lot, they get in the way. When I open the sheet, I can move one message to the side of the page and the rest of them come up at the same spot but when I save, exit, and reopen, the message comes up beside the cell and I would like it to always stay to the side of the page.
View 9 Replies View RelatedAny macros for deleting any data not on the print area.
View 3 Replies View RelatedI have a code Ive been trying to get to work. It works fine with selecting the print area based off a cell value, it just wont update when ever the value changes.
This is on the Sheet's code
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target Range("A1") Then Exit Sub
Call PrintbyName
End Sub
And this is in a module
Sub PrintbyName()
Dim rng1 As Range, rng2 As Range, rng3 As Range, rngPrint As Range
'Refer to the named ranges
With Worksheets("Permit Page")
Set rng1 = Range("$A$1:$bx$603")
Set rng2 = Range("$A$1:$bx$493")
Set rng3 = Range("$A$1:$bx$493,$a$549:$bx$603")
[code]......
I wasnt sure if I was suppose to fill out where it says "nothing".
How can I print 2 selected area (highlighted area). I know there is a trick to do that. Right now I can only select (highlight) one area to print, but would like to know how to print 2 or more areas at same time
View 7 Replies View RelatedI am trying to set the print area based on cell values, but I keep getting errors when running the macro. It fails where I have highlighted, but rc.Value shows as the proper number.
[Code] ....
I'm looking for a way to set the print area based on the value of a cell. I have a worksheet that prints a 12-page document, with data pulled from separate sheets. At the bottom of these twelve pages is an additional 2-page section that I only need in certain instances.
For example, if a cell (let's call it A1) on Sheet1 says "brown," I need the print area set to include these additional pages. If that same cell ('Sheet1'!A1) reads "yellow," however, I don't need to include the 2 pages in the print area.
I have a template worksheet that several people use and print from.
The range on this worksheet used is A1:C499
I want the VBA to look at tha last cell that is populated in column A and set the print area to suit.
i.e. the last cell used in column A could be A277. then I'd want the print area to be A1:C277.
I just converted from Excel 2003 to 2007 and print previewed a worksheet and find a tiny image with a small portion of the print area. When I look at the sheet in page break preview mode, I see the 8.5 x 11 sheet broken up into approx 77 smaller sheets. When I try to move the page breaks to include the whole sheet it states the change cannot be made as it will result in an image less than 10%. I have attached two images - the first shows the print preview I get, and the second show the multiple pages when I view in page break.
View 4 Replies View RelatedI have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.
View 4 Replies View RelatedI need a macro that will print a hidden page that is linked to the page I have active.
It needs to be able to find the correct hidden page that corresponds to the active page because there are multilple pairs of the hidden/visible pages. The name of the hidden page is the same as the visible one with "printout" added to the end. When created, the sheet code names are sheetn and sheetm; n and m being consecutive numbers.
with creating vb code that will select certain rows in a spreadsheet, set the print area to those rows and print them out, and then reset the print area back to default.
The data is all on one sheet, but is split into 5 different areas, each below the next, with the column headers at the top of each.
e.g.
header_____header_____header
data_______data_______data
data_______data_______data
data_______data_______data
header_____header_____header
data_______data_______data
data_______data_______data
data_______data_______data
and so on. At the press of a button it'll set the print area to the first section and print (the section includes the headers as well as the data). Then at the press of another button it'll set the print area to the next section. There could be any amount of rows of data in each section so it needs to cope with that.
I have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.
Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................
On my billing/table of contents sheets, there's an imaginary thick blue line that surrounds the bottom/right side of my chart, and everything outside it is grey/non-existent. I can click and hold this blue line to expand it over other cells to make them 'appear'. I have no idea what all of this is called.
The amount of columns I use for each sheet is static, but the amount of rows varies with each job. As it stands, I have to raise/lower that blue line every time I have new data. Is there any way to force this line to move up or down depending on the existence of data in cells automatically?
I have 2 workbookts: 1) Product; and 2) Buyers.
1) In the Products worksheet, every column has data about the books' description like:
A | B | C | D | E
Serial | Desc. | Author | Pubd. | year
Column A contains serial no. of the books, ordered from 1,2,3,4,5,6,7 to .....so on...
Columns B,C,D and E, have other details of the books.
2) In the Buyers worksheet, there are two columns;
A | B
Serial | Buyer Info
These are the details people who bought the particular book order by the serial no. of the book purchased.
Required
I need to make a new column in the first worksheet i.e. Product, say F, which I want to read all the buyers' info of that purchase the book with that serial no. and concatenate them together in the same cell separated by a comma.
How do you format a cell to allow a page break?
Be able to type a word and hit enter and have the cursor move to below the word you typed
I have a sheet that will be about 5 pages long if printed. To minimize wasted ink and paper, using VB I would like to be able to have it only print the portion uses (data entered) along with a section at the top and bottom. The section at the top would print on the top of the first page and the section at the bottom would print on the last page.
I know I could record a macro to select an area and print that but it would not do what I am trying to accomplish.
I have an excel sheet with lots of rows (it goes up to BAA) I would like to be able to print certain parts with a VBA
for instance if Sales is selected from a drop down (lets say A1) the macro will print
Area : C7:Z500
Scaling: fit to 1 page
Orientation: landscape
Color: Color
or if Sales next year is selected
Area : C7:D7 AA7:AZ500
Scaling: fit to 1 page
Orientation: landscape
Color: Color
etc....
I use the code below to print a portion of a sheet. My problem is that the area always changes. The $A$476 should be the first cell in that column that contains "HEA" The "536" in $F$536 is the last row that contains data. There are conditional formats all the way down to row 1,000 but not data
Private Sub CommandButton1_Click()
Dim strCurrentPrinter As String, strNetworkPrinter As String
****strNetworkPrinter = GetFullNetworkPrinterName("Adobe PDF")
****If Len(strNetworkPrinter) > 0 Then ' found the network printer
********strCurrentPrinter = Application.ActivePrinter
********' change to the network printer
********Application.ActivePrinter = strNetworkPrinter
********ActiveSheet.PageSetup.PrintArea = "$A$476:$F$536"
********ActiveSheet.PrintOut** 'print something
********' change back to the previously active printer
********Application.ActivePrinter = strCurrentPrinter
********ActiveSheet.PageSetup.PrintArea = ""
****End If
End Sub
Obviously there is a function also that finds the full network printer name, I didn't think it was important, because my issue is the print area. Everything else works fine. If you need it let me know and I will post it.
Looking for a macro that will set the print area on an accounts spreadsheet to the last non blank row, bearing in mind that all the rows contain formulas, have tried some macros but they assume the cells with formulas in them are non blank
View 4 Replies View RelatedGoal is to select range from active cell ( where coursos is ) to the top of that row. For some reason
ActiveSheet.PageSetup.PrintArea = Range("xey1":ActiveCell())
Does not work?
Making a macro that selects active cells (so anything with text in) and sets that as the print area.
Using the default builder I have:
Range("A1:AA44").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveWindow.SmallScroll Down:=30
Range(Selection, Selection.End(xlUp)).Select
Range("A1:AA692").Select
ActiveSheet.PageSetup.PrintArea = "$A$1:$AH$692"
[Code]...
Can trim this code with something
Range("any containing data").Select
ActiveSheet.PageSetup.PrintArea = "selection"