I was able to input barcode reader data into A1, and automatically get the date inserted into B1. I wish the next activecell to be C1, instead of A2 as the above code is doing at the moment - so how do I alter the code above to make this happen?
View 3 Replies
I know that the shortcut for moving the cursor to cell A1 of an active sheet within a workbook is Ctrl + Home. However, I thought there was a shortcut (using just keystrokes) to do this for all the sheets within the workbook. Is there such a shortcut?
View 1 Replies View RelatedWhen I add a text box in Excel 2007, when I type the text box, instead of the cursor moving forward as I type, the cursor stays in the same place and the text moves backwards.
when I try and navigate back through the text, pressing right will make the cursor go left, pressing left will make the cursor go right
I am working with a VBA userform and several textbox's, setting SetFocus and or TabIndex doesn't leave the box ready to accept input and there is no cursor shown to indicate it is ready to accept input.
View 2 Replies View RelatedUsually when I select a number of cells with my cursor excel adds up the cells and shows a total on the bar. It's stopped doing this now and will only show the 1st cell showing "max=No"
View 3 Replies View RelatedI would like to change A1 cell's Interior.ColorIndex to red color and A1's font format to Italic, while mouse cursor on top of A1 cell.
Can i do it with a VBA code or any different way to do it?
For example:
Sub CursorOnA1()
If MouseCursor OnTopOf [A1] Then
With [A1]
.Interior.ColorIndex = 3
.Font.Italic = True
End If
End If
End Sub
I want a macro which will move cursor to right cell of the same row when the user will press enter in a particular sheet of particular workbook. I have tried the ToolsoptionsEditmove selection after enter , but this applies to excel as a whole and needs to be change every time if another worksheet or workbook is used and thus creating difficulty.
Can this be done through a macro as I need the cursor to move to right cell only for a particular worksheet and for a particular workbook?
I want to do a arrangement for a file like this " wherever cursor moves in excel that particular cell will highlight with color and once it goes to some other cell that last highlighted cell will come as a ordinary cell"
View 5 Replies View RelatedI have some code that unhides the next worksheet when the value 'next' is selected at the bottom of the sheet being completed.
I would like to add some code so that the new sheet is opened and the curser is placed in the first cell that needs to be completed (E5).
I want to be able to enter a single digit figure into a cell and have the cursor move automatically to the next cell to the right. then enter a figure in there and have it do the same thing. is this possible and, if so, how?
View 2 Replies View RelatedI work with a sheet with active columns B thru I, which get daily numeric entries. The problem is that I have to enter data in columns H & I first, then go back to B thru G. how to force the cursor to jump to column B when I tab out of I into J?
View 5 Replies View RelatedIs there a way to make the text cursor appear at the start, as opposed to at the end, of a cell when pressing F2 to edit it?
View 3 Replies View RelatedCan a macro start from wherever cell the active cursor is on? or
perhaps from the cell that the macro button is clicked?
What I am trying to do is copy the data from F(whatever) to whatever
the last empty cell is in the row holds the active cursor. Or I can
create buttons for the macro to run, and it could copy the information
in that particular row.
Imagine you have only one column - column A. In column A you have 500,000 + rows with text like the following:
!magnus
snooze'
sleepy/
act noun
act verb
Today&tomorrow
*bialgebras
/dev/ null
dev
ull
1970;
Dwight Schrute
and your goal is to figure out a way to simultaneously transform the above rows into:
snooze
sleepy
act
act
Todaytomorrow
bialgebras
devnull
devnull
1970
DwightSchrute
I know I can use Filter and filter out characters like &'!/; but that takes too long because I have a lot of lists to go through with thousands of entries. There must be a macro that will close spaces between words when only one space exists, but eliminate every word if 2 or more spaces exist between words - as well as eliminate unwanted characters like the ones I described above. I know I could use substitute and eliminate the spaces between words =substitute(a1," ","") but then I'd have to filter each and every instance of unwanted character.
I would love to be able to write a formula that instructs the cursor, after data entered in one cell: say i9, move right in a tab fashion to j9, instead on a downward action to i10.
View 11 Replies View Relatedexist any function that do following?
I am on the row 100 in column G. I had a freeze the first row where i have hypertext and other function. I want add here (in the 1. row) something like hypertext, but i want to stay in the row where i was.
When i am on row 100 in column G and i want to create function which move my cursor to column W but in the same row (row 100 in this case).
Next time i will be in row 154 and i will want to move my cursor again in column W and use this same hypertext/function or what.
trying to find the value of column A (date field) if it exists on the row that the cursor is presently on. I'm trying to check for the value before performing the next function to make sure the user is on a valid row. Cursor could be on any column A to F. Columns are always 6 but the rows can vary.
View 7 Replies View RelatedI have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies View RelatedI have 3 columns Z, AA, AB. The heading for Z1 is “A”, AA1 is “B” and AB1 is “C”
In column Z2:Z2000, there is a mix of A, B’s and C’s. I want A to stay in Z1 column, B’s to goto AA1 and C’s to goto AB1, also I want this added to a macro that I previously created, so everything happens with one push of a button
Now for save, not sure if this is possible or not, if I can have this added to the macro as well that would be great. When I push my macro button, the file saves to “Dec (today’s date) DB (81).xls” The number 81 is the total count of A, B’s C’s, this # will change depending on how may A, B’s and C’s there are. I really hope there is a way of doing all this
BEFORE
A B C
B
A
A
B
C
C
C
A
A
B
C
SHOULD LOOK LIKE THIS
AFTER
A----B-----C
----- B.....
Essentially, there are two columns I am dealing with. One is "Sales Rep" and it lists all of the sales reps employed by the company. The other is "Zip Code" and that will list all of the zip codes that sales rep is responsible for.
Now, I have a row of data, all of those zip codes listed out, that each rep is responsible for, but my supervisor wants all of the zip codes listed in one cell, in that second column. Example: (02018, 34098, 16711).
The commas are not necessary, but is there any way to get this done other than manually entering them?
I have cut and pasted a large amount of data onto a spreadsheet. The problem is that I have two rows of data that is associated with one another, so lets say A1 has a name and A2 contains that person's age. This process repeats in the same way in A3 and A4 and so on.
I need to move the data from A2 to B1 without using a simple function like =A2 in B1. The reason is that I will need to sort just the Names in column A once I get the the data moved. I am not sure how to do this.
OS=XP Pro
XL=2003 SP3
I need to move data within a cell. Is there a formula that can accomplish this? Here is an example of what I'm trying to do..
Column A
/ TN14YP244f
/ TN15YP245j
/ TN16YP246h
What it would need to do is take the last character in each cell and move it to replace the P in that cell. It should also capitalize the letter. ie: / TN14YP244f would become / TN14YF244
The letters at the end of the cell are always different, however the letter they replace is always the same (P).
What I need to do is have the macro move down a cell each time the data is pasted -
Sub saleschartnew()
ActiveWindow.ScrollRow = 3
ActiveWindow.ScrollRow = 2
ActiveWindow.ScrollRow = 1
Range("G3").Select
Selection.Copy
Sheets("Monthly Sales Chart").Select
Range("E10").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Sheets("Entry form").Select
Range("C13").Select
Application.CutCopyMode = False...............
I did search and found this: activesheet.cells(row,Col).offset(0,1).value = " Properties"
However, my knowledge of VBA is basically zero so I am not sure how this would be implemented into the macro.
My direction keys currently move the screen instead of move from one cell to another. For instance, I will have cell A1 highlighted and then press the down key. Instead of going to A2, it stays at A1 but the screen moves down one cell
View 2 Replies View RelatedI have a cell that has text added to the cell using a function. I need to move the cell to a different location, but without the text.
View 1 Replies View RelatedI am working in excel and for some reason when I hit the enter key it stays in the same cell. I never had this problem before, what did I do and how do I fix it?
View 2 Replies View RelatedI have a worksheet with running macros which hides & unhide rows based on input of data in yellow highlighted cells (see attached). I'm trying to make all cells mandatory. The below code works but I run into problems when certain cells made mandatory are hidden. For example if I select "Expense" as Type of Expenditure in the attachment cell C10 & C11 are hidden so if its mandatory I won't be able to move forward to next cell.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Application.EnableEvents = False
Me.Unprotect "dawnwh81"
Dim myCell As Range
Dim myRange As Range
[Code]....
Inputting a value in a cell and need to use vba to transfer it to another sheet in the same workbook. Need it to go to the first empty cell in a column upon clicking a button.....then change the value in the original sheet and repeat (upon clicking button again).
View 2 Replies View Relatedhow to filter rows of data, in ascending or descending order, whilst still retaining formatting (in my case cell borders) and conditional formatting?
At present, when I filter rows in ascending / descending order, the cell formatting & conditional formatting stays in it's original position, rather than moving with the cell. I can't find a way to resolve this.
The attachment below is a basic example of what I am trying to accomplish. I am looking for VBA code to take data from E3 in "Historical1" sheets and move it to down into the table in column E that corresponds to the date in D3. The other "Historical" sheets will work the same way. Cells D3 and E3 in each of the "Historical" sheets equal back to cell on the "Entry" sheet. This is a very basic example of the ultimately bigger data base I am building. why I am utilizing a entry sheet to elevate the need to go to each sheet and enter data.
View 2 Replies View Related
