I want to go dorn column B, starting at B26:B, and if the value in B equals any of the values in C2:C25 than delete that entire row(not just delete the word, because there are values in column C and D that I need gone with the C value).
Each day I am going to have a list of about 300 different ID numbers, which i have already got a macro for creating, that outputs them into a single column on a sheet.
The next challenge Ill face now, is that I'll have a list of maybe 500 ID numbers in another spreadsheet.... I need a way to basically tell excel to keep rows that contain the numbers in 1 column on the list of 500, that correspond with those on the list of 300.
Numbers that are not found on the list of 300 ID numbers, must be deleted, along with the entire row.
I essentially need a macro that runs something like this that i found online, but instead of it just looking for the word "apple" as rows to delete, i would need it to check to see if the number is one of the 300 on my list.... and delete the row if it is not on the list
I have a keyword list in ColA. about 25,000 phrases. What I want to do is create a macro button. when i click on it a pop up box would appear called "Deleting Characters" It will have to 2 rows, 1 saying "More Than",, the other saying "Less Than"
So, beside these words are input boxes. So I can type the numbers "2" and say "50" So it will look at all the rows of data in my ColA (Always from A3 downwards) and deletes all rows with less than 2 characters and more than 50 characters. When it is finished a floating box appears saying "123 Characters Less Than 2 Deleted" "101 Characters More Than 50 Deleted"
Sub NoOfCharacters() Dim lastrow As Long, TotP, TotC, AvC lastrow = Cells(Rows.Count, 1).End(xlUp).Row If lastrow < 4 Then MsgBox "Nothing to sort!" Exit Sub End If Range("B1").EntireColumn.ClearContents Range("B3").Formula = "=LEN(A3)" Range("B3").AutoFill Destination:=Range("B3:B" & lastrow) Range("A3:B" & lastrow).Sort key1:=Range("B3"), order1:=xlAscending, Header:=xlGuess TotP = lastrow - 2 TotC = Application.Sum(Range("B3:B" & lastrow)) AvC = TotC / TotP MsgBox "Total No Phrases: " & Chr(9) & Chr(9) & Chr(9) & TotP & Chr(13) & "Total No Characters: " & Chr(9) & Chr(9) & TotC & Chr(13) & "Avg No Characters Per Phrase: " & Chr(9) & AvC End Sub
"Is there some VBA code which could delete all first, second or third characters of a text? Could it be done to the three last characters from this same text and these be displayed on reverse order?"
I am trying to write a macro that will go through each cell in a column with the following format "| 12- 4" or "| 60-11" and will remove the first to character "| ".
There numbers are lengths, the first being feet the second inches. I would like to achieve in a separate column the numerical length (with decimals) multiplied by 1%. My code is as follows I just need help on the conversion.
Sub newLength() Dim LR, lrow As Integer Dim feet, inches, Line As Double
LR = Range("B65536").End(xlUp).Offset(1, 0).Row For lrow = LR To 2 Step -1 If Cells(lrow, "D") <> Cells(lrow - 1, "D") Then Rows(lrow).Insert Shift:=xlDown End If feet = Left(Cells(lrow, "E").Value, 4) inches = Right(Cells(lrow, "E").Value, 2) / 12 'I need to debug this line, but I suspect there is more I need to do. Cells(lrow, "F") = feet + inches Next lrow End Sub
Sub rightval() Dim myrange, mycell As Range Set myrange = Sheets("Sheet1").Range("A1", Range("A65536").End(xlUp)) For Each mycell In myrange If Right(mycell.Value, 1) = "." Then mycell.Value = Left(mycell.Value, Len(mycell.Value) - 3) End If Next mycell End Sub
I'd like to delete the last three values of one cell only if it contains a period.
I need to delete all the digits before / and also the / - in the valuta columns. But this =RIGHT(B2,LEN(B2)-6) doesnt work It says > the formula you typed contains an error
I have about 2000 rows, all with an amount of words between 2 and 6. I want to limit each row to keep only the first TWO words. Is there a way to do this?
If not, is there a way to limit each row to only keep the first 11 characters?
I can't get this code to work which I want to delete the entire row if the cell in the specified range contains only 3 characters;
Code:
Sub CharCount() Dim cell As Range Dim bottomK As Integer bottomK = Range("D" & Rows.Count).End(xlUp).Row Dim rng As Range Set rng = Range("D2:D" & bottomK) For Each cell In rng If Len(cell) = 3 Then EntireRow(bottomK).Delete End If Next cell End Sub
I need a formula which can clean up a huge data set. Essentially i need to delete the entire word which contains the characters "aceae". note that "aceae" is a suffix, but i need to delete the entire word not just the suffix, plus keep the rest of the string. i have tried the "find and replace" function of excel with wildcard, but that deletes everything before/after without deleting the entire word. i have tried a combination of formulas to isolate the unwanted words, but that method is inefficient and inaccurate. below is a schematic of what im looking to do:
Column A ------------------------------ Column B l. planeri asteraceae africa laselva-----> l. planeri africa laselva l. planeri moraceae europe singer------> l. planeri europe singer origin l. fluviatilis bignoniaceae asia----> origin l. fluviatilis asia alternate l. fluviatilis piperaceae asia---> alternate l. fluviatilis asia
I need a way to check to see if the first four characters of cell A1 is = 2006. If it is, do not delete the row, else, delete the row. Have tried everything I can think of.
I have a spreadsheet that i manually edit each and everyday e.g.
A B C EABGL/UD NDT254892 MRMR/RUS/ELQNS259762 LSL/UW/B LQNS267259 WWEX/UQ bbr263666 LWL/KL/B 270407 MYTCJ/UB NDT271774 LNL/SB/UB HLC - 271955 SMMQD/WT HLC - 269516 EACO/TN/UGBBR257827 NILVA/UC EUi273645
For everything that doesnt equal EM, LN, LW and TH in column A, everything should be deleted in column B.
For the remaining EM, LN, LW and TH, i would then like it to delete / (forward slash and all characters after this) so that this would make my life easier.
I have one column with many numbers. Some have one dash and some have two.
Example: 123-123456-65 012-789546-1 98B12354-889
Is there a way that I can remove all characters after the last – (dash) in the number? Example:
If number is 123-123456-65 Then 123-123456
If number is 98B12354-889 Then 98B12354
If someone could just lead me in a direction, I might be able to figure it out. However, my code is elementary and most of the time, I record macros and the play with the code until it does what I want.
I am trying to detete rows that have several specific values, upper and lower case, (A-H) in any of several columns (B through H). I can delete upper and lower case "D"s in column B, but I'm having difficulty stringing together several variations and getting at the "D"s that are midstream (such as: ADeC), I tried ("*D*") to no avail.
With . Cells(Lrow, "B") If Not IsError(.Value) Then '**** If LCase(.Value) = LCase("D") Then .EntireRow.Delete
I'm making a register and need to count the attendences (marked on the register as 1) and the number of authorised abcenses (marked on the register as AA).
I'm using the SUM function to count the attendences but wondered if they was a formula that would allow me to just count the AAs from the list.
I have a large list of phrases, about 30,000 all in Col A. (From A3 to be exact)
What I want is to sort by number of characters. I know excel can sort A-Z,,, but I can't see by number of characters??
Is there anyway I can sort this list by No of Characters please??
List does include letters and numbers. But they are mainly 3-4 keyword phrases.
This is so from a large list all the least amount of characters will be at the top of the list so I can easily see them,, and probably delete most of the 1,2,3,4 character returned results.
I'm using Excel 2007. I want to write a formula that will list all characters in a string to the left of a "-". See below example. What formula would I use?.......
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
I'm currently working with 3 dropdown lists depending on each other using data validation and =indirect(). I arranged them like in a top-down approach where you have a mother-list and child-lists (categories-->subCategories-->subCategoryCriteria). The user should easily chose first a category then a subCategory etc... This part works perfectly
My question is: when a user chose in the dropdown list e.g. a category, a subCategory and a subCategoryCriteria and he now maually deletes the value in the highest level, which is the Category (mother-list), all sub level values like subCategory and subCategoryCriteria will stay. It shouldn't be that way, because it's not logical. If you turn a tree upside-down (top-down approach) and cut one of the higher positioned trunks, all lower positioned trunks will fall off as well, right? So, my question is: can I use a conditional formatting or a formula to delete or fade out the value in the lower lists when the higher list value is being deleted?
I tried to use If-formula in combination with indirect in data validation, like =IF(A1="";("");INDIRECT(B1))...just and example.
The value doesnt need to be deleted, it could also be automatically face out like white on white or something. It's just confusing for the user if he deletes the highest choice and the lower choices still stay.
I have a large list of parcels to be delivered which have names, the last 2 letters of the postcodes, addresses tel. no. etc. I have created a custom sort list of postcodes in the order I want to deliver them. I can only list a total of 85 postcodes since there are 2 characters in each postcode and a return at the end of each line, hence 85*3=255.
Is there any way I can make excel sort my list of parcels using a spreadsheet list of the 2 postcode letters of unlimited length? There is a theoretical maximum of 676 postcodes in my area (26*26) so I would need it to be at least this long. It would also be more convenient if it were an excel based list since the editing of such a list would be more convenient.
I am working on an email marketing project and i have a small problem. I have two different email list. One (List A) is a large list of potential leads. The other (List B) is a list of leads we are not supposed to market to. I need to delete every lead on List A whose email address is also in List B, so that we do not send unwanted emails to our clients.
The best way i have to do this so far is to go through line by line, which is very impractical.
In case it matters here is out list format. Each list has 10,000 + leads. Each lead occupies a row. The row stretches across 13 columns and each column holds a different variable about the lead (names, state, email address).
How to sort a column of data based on a custom list with more than 255 characters.
I have created a named range with 40 entries and then added data validation in the cells of column D using the above named range. However, I want to be able to sort column D in the same order as the named range but the custom data sort lists are restricted to 255 characters.
I work in a fruit and veg business and they are using parchment and quill still, well it certainly feels that way. I have been asked by customers to provide an online order form which i will email to them and they can fill in and email back, i scanned an invoice and used OCR to upload it to excel and it has come out quite well.
Basically there are three columns of product lines and then directly to the right of each product is a column i have entitled Box & KG respectively, if the customer types a number into the box column i want it to automatically add 'Bx' to the end so this if they typed 5 in a cell in the box column it would look like this '5 Bx' (obviously without the quotes), and the same for the KG column but it would denote 5 KG instead, also i would want it to add in the space as well after the value.
Is is possible to get a dropdown list to show the actual characters as they appear in windings or marlett as shown in the source? When I try I am just getting a load of u's with accents and dots above.