How can I delete characters unallowed in file names in cell text all in one go instead of below long macro. (i.e. can you minimize the below vba)
These characters that I wanna delete
"/", "", ":", "*", "?", "< ", ">", "|"
Code:
Range("A1").Select
Selection.Replace What:="""", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
[Code].....
"Is there some VBA code which could delete all first, second or third
characters of a text? Could it be done to the three last characters
from this same text and these be displayed on reverse order?"
Example:
AAAASAHDASK
AAASAHDASK
AASAHDASK
ASAHDASK
SADHASAAAA
ADHASAAAA
DHASAAAA
From the names listed in column A, in the table listed below, I wish to delete everything
to the right of the first two characters.
So the new column A would look this.
A
1
E HAZARD
2
F LAMPARD
3
F MALOUDA
[code].....
I have a worksheet with many tables that I use in formulas.
I like tables for a couple reasons, one being the ability to insert/delete rows without affecting the rest of that worksheet row.
Also, automatic copy of formulas/formatting is great.
But, what I really like about tables is the ability to use the naming conventions in formulas.
Problem is when I save this worksheet, after I close it and open it back up, all table references in my formulas have been converted to cell references.
Example:
Code:
=IF((SUMIF('Quote 1'!$M$28:$M$43,">"&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&tblOSSRV[Min Order Cost])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],""&tblOSSRV[Min Parts Per Line])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],"
I am currently using cell references to create a depedendent list with data validation. How to make cell references show up with some invalid characters?
For example, one of my cell references is Youngs_Market_Company. However, when pulling up the cell, I want it to be displayed as Young's Market Company.
I have a Text-File with characters coded in simple chinese (gb2312) rsp. codepage 20936 and I want to read this file, paste the content in my worksheet. Later (after a chinese edited the text) I've to write this back to a text file.
The only way I found to make this, is by copy/paste e.g. from WordPad, but I want to automate it with VBA.
I have a very large file of data, over 500,000 rows, opening in one sheet in Excel is not an option with my current version. In each row I need to change the characters in positions 41-44 from whatever they current are, to '9999'. I'm sure there has to be a way I can do this using vba, does anyone have a sample snippet of code, or another post they can point me too?
View 9 Replies View RelatedI have a formula which I have been using for testing up till now. =IF(LEN(Q3)
View 4 Replies View RelatedWant to do something *almost* exactly like a previous post but that post is now closed. Extract Each Sheet To Text File & Save as Sheet Name .txt` I want to extract data from individual worksheets from a workbook in excel to individual text files with the **same name as the original excel file** plus incrementing suffix.
Example: File_Name.xls with worksheets: Sheet1, Sheet2, Sheet3
==> Result...... File_Name_01.txt, File_Name_02.txt, File_Name_03.txt
don't delete - this is not a duplicate post. Previous code 1) creates text files with "sheet name" as was the original post's intent (not "file name") and 2) it does not iterate through each sheet (only processes Sheet1 regardless of selected sheet in the workbook)
Sub wsToText()......................
I can't get this code to work which I want to delete the entire row if the cell in the specified range contains only 3 characters;
Code:
Sub CharCount()
Dim cell As Range
Dim bottomK As Integer
bottomK = Range("D" & Rows.Count).End(xlUp).Row
Dim rng As Range
Set rng = Range("D2:D" & bottomK)
For Each cell In rng
If Len(cell) = 3 Then
EntireRow(bottomK).Delete
End If
Next cell
End Sub
I need a way to check to see if the first four characters of cell A1 is = 2006. If it is, do not delete the row, else, delete the row. Have tried everything I can think of.
View 5 Replies View RelatedI'm trying to find a way to save a file based on the contents of cell A2. I've modified the code to Create Worksheets for Each Item in an Excel Table of Data, so that it creates a new workbook for each item. I am also trying to get it to save the master workbook based on the first 2 characters in the cell. Here is the code I have, at the moment (the FAIL.xls is what I put in for testing)
If Range("A2").Value = "YE*" Then
ActiveWorkbook.SaveAs "YE_Master.xls"
ElseIf Range("A2").Value = "NE*" Then
ActiveWorkbook.SaveAs "NE_Master.xls"
Else: ActiveWorkbook.SaveAs "FAIL.xls"
End If
I've tried this, string arrays and everything else I can think of, and it's failing every time.
As I have been working I have highlighted cells and typed different names in the Name Box thus creating different lists. How do I delete the lists after they have been created?
View 2 Replies View RelatedI have a cell (B2) I would like to apply multiple data validations to.
I know I need to use the custom formula option but don't know how to write the formula.
I don't even know if it is possible, but here is what I'm after
I need to make sure the cell is 4 digits long
I need to make sure the cell starts with a zero (Because the cell starts with a zero I have it as a text cell)
I need to make sure the 2nd number is not 0 if A2 begins with 5 (A2 is also a text cell).
I have a task I would like some assistance with…
I have a work book that I have to copy over 70 times for over 70 work locations. As you can see, this will require different file names for each location.
I would like some have help with a code that I can use. If possialbe I like a code that will make copies of the file renaming each with the names I have on another list. Is this feasible?
I'm writing a macro in excel that edits a text file runs another program that uses this text file as its input and then stores the results. Perameters are then changed in the input file and it is then repeted over and over again. One of the parts I am stuck on is I need to delete the last 5 lines in the input file called INPfile.txt. See below:............
This section is always at the end of the file, is 5 lines long and always starts with [DEMANDS] and always ends with [END].
I use the Append command to write a line to a text file. I have about 3 excel files appending data to the same text file.
If someone were to write a line in error I would like to have the ability to delete it.
I am trying to read a text file into a variable with VBA. The files I try to read usually have a bunch of unrecognized characters in them and I can't seem to read through them. I am looking for some code that will delete all unrecognized characters until it finds a string I specify.
Example of file
ΚW
¾J Y D Y ³F Y ZE Y ¨B Z ˜6 Z
GOOD DATA
My code works fine if I manually delete all this stuff before GOOD DATA, but wont work if I dont. My "responseposition" is always 0 unless I delete all the nonsense.
Sub findvalues()
Dim strText As String
strText = GetFileContent("C:currentday.gdbm")
cardstring = "GOOD DATA"
responsePosition = InStr(1, strText, cardstring, vbTextCompare)
MsgBox (responsePosition)
End Sub
Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
I pasted in 1369 characters (including spaces) to a cell, and NO MATTER what I try, all characters will not print.
If I have the cell up for formatting on the function line, all text can be seen, but for some reason it cuts off the last sentance or more and will not show it in print preview.
I've tried all kinds of cell text formatting, cell merging, etc. with no luck. The only work around I found is to just have the "missing text" on the following row.
This is very similar to my previous post, which was solved. Now that I've extract the numbers, I need to extract the text for the specific work activities, for example 13Z or 9GGG. I'm assuming some variation on this formula:
=LOOKUP(9.99E+307,--MID(C4,MIN(FIND({1,2,3,4,5,6,7,8,9,0},C4&1234567890)),ROW(INDIRECT("1:"&LEN(C4)))))
is the solution, but I'm struggling with making the correct alterations.
Is there a function that can remove all text and other characters from cell and only keep the numbers? The numbers can be randomly in the cell so not only in the end or beginning.
See attached file.
This should be simple, but I am struggling with finding a way to use the search or find function to identify text characters. This is my situation, I have for example a cell that contains FW023 or D1234. I need to be able to count the number of characters that are text.
i would think I would be able to do it with the search or find function, but can't figure out how to get it to just count the number of text characters with in it.
a formula that will count the txt chars in a cell example ie "aa99" result would be 2 or "aa99aa" equals 4
View 9 Replies View RelatedI have some cells in a spreadsheet that contain unique numbers as the beginning of the cell (these numbers are always ten characters). In the rest of the cell there is text. the data would look something like this:-
SGGHNVT561 - 3yr Maintenance
I also have some cells which dont have the unique number at the begging, so the data would just look like:-
3yr Maintenance
In another table I have a list of the unique numbers and the name that they correspond to, for example (this is the 2 columns)
SGGHNVT561 - Dave
HUKIDO8946 - Stuart
HJUTIFHE78 - Graham
I have ben trying to construct a formula that only searches the beginning of the cells to see if it containts one of the unique numbers and if it does to put the name of the person beside the cell. If the unique number is not there to return a value like 'Check'.
i tried vlookup but then i ran out of ideas :/
this is what i came up with so far:-
=IF(P7="","",VLOOKUP(P7,'[Master List.xls]Sheet1'!$B$2:$C$5,2))
The only problem i can see that this is looking for the full cell to be within the master list - but its really just the first 10 characters I want it to check
I have around 50 text files with similar design per attached file. I need to import the text files with criteria below:-
1. include file name
2. let user choose the folder
3. exclude data from "work in process summary" to "work in process cost totals"
4. only have one title in the excel files which all text files is combined "Item, Line ....."
5. If the text files do not have title like "Item, Line, ..." do not import
Is it possible to have all criteria listed above by running a macro?
A.txt
In an active cell I have this value : " Hello.xlsm"
I need a MACRO code that will take out the characters ".xlsm".
I am trying to focus on the active cell and not a range.
I have a cell which contains the following information:
01E4R3; 01W5; 01M4G3; 01W5
I want to sum up just the numbers in that cell. In this example, the answer should be: 30
Is there a way to specify if there are 46 characters in a cell, to apply text wrap, indent the second line, and resize the row height to 25.5?
For example, I always will have text on merged cells B7:C7. I'd like to have a macro that determines if the text goes over C7 (I figured that it would take 46 characters to do this), that the merged cells will be text wrapped, then row 7 will be resized to 25.5.
I know how to record a macro that will text wrap and resize the row height but am not sure how to do the "if" condition.
I wish to limit the number of text characters in a cell and have excel prevent the entry of additional characters after limit is reached. I have tried the Data Validation but it does not preven the entry of additional characters. I want to be able to show the error immediately when the limit is reached and no additional characters are permitted.
View 3 Replies View Related