In my excel sheet, data present in the column are in dynamic range. After that I want to delete or clean all blank column which is bordered and in fill color. What VB program I have to write.
E.g. if data is present upto column 'J', then I have to clean all columns from 'K' onwards..(where bordered and fill color there)
I have workbooks with 100's of worksheets That are all in the same format, a bordered section at the top and a non bordered section below it. Some of the sheets have a blank bordered row at the bottom, and some don't. What I would like is a macro that checks down column A for the last bordered cell, checks if that cell is empty, and if it is delete that single row, so that the non-bordered section of the sheet remains as was. If the cell is not empty, continue to the next sheet.
View 9 Replies View RelatedI am using this formula:
=IF(INDIRECT($E$1&"!$B4")=0,"",IFERROR(INDIRECT($E$1&"!$B4"),""))
Now, if that cell happens to be blank, I want it to be grey. But if data is drawn into the cell, I don't want it to be grey.
i found a link to my problem in the subject title below,
http://www.ozgrid.com/forum/showthre...t=45580&page=2
The guy at the end of the post says he got it working in the end, but no one seems to have posted the final solution - could someone tell me if the solution is actually in the thread, and if so where!
My problem is outlined by this guy - basically i want to be able to delete rows in a range that have no fill color, and so keep the ones that are colored.
I am looking for code that would delete all columns in a worksheet that do not contain a fill color.
View 9 Replies View Relatedhow to sum/count cells based on background color [url]
how to delete cells based on background color?
I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
My macro works fine but I'm interested in seeing if I can speed it up. What I'm doing is starting at the bottom and comparing it with the row above and if they match in font color it will fill the top with orange and delete the bottom. This works but usually takes several minutes.
Public Sub ADMINCompareList()
Dim varTest1, varTest2
Dim lng As Long, i As Integer, iTest As Integer
Application. ScreenUpdating = False
Worksheets("ADMIN").Activate
For lng = ActiveSheet.UsedRange.Rows.Count To 2 Step -1
If Not Range("M" & lng).Font.Color <> Range("M" & lng - 1).Font.Color Then
Goto newrow
End If
varTest1 = Intersect(Range("J:W"), Rows(lng))
varTest2 = Intersect(Range("J:W"), Rows(lng - 1))
For i = 1 To 14....................................
I need VBA code to fill a column with a color. I need it to stop when there's no more data. instead of filling column to the end of the entire page. and each sheet i open will have different amount of rows.
View 9 Replies View RelatedI am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I've an excel table containing the list of expenditures of employee. I've to sort the table and use different colors for different employee rows.
How can I do this task using formula? Is this possible?
Please see the attached excel sheet for the sample table and desired output.
If A1 has a value of ABC,
A2-A5 are blank
A6 has a value of DEF
A7-A10 are blank.
Is there a formula that will fill A2-A5 with ABC,
look at the value of A6 and see that it is different from A1-A5,
or not blank,
change the fill value to the new value, A6,
then fill down the value of A6 into A7-A10
instead of manually using the fill handle?
I have been using this code I found awhile back to fill blank cells in a column with the preceding value. but it leaves the very last cell blank. Like this.
A
B
41055182
905182
41054750
905182
[Code] ........
Is there a way to add possibly a "Do until column B is null or """?
Code:
Sub FillBlanks()
Dim rRange1 As Range, rRange2 As Range
Dim iReply As Integer
If Selection.Cells.Count = 1 Then
MsgBox "You must select your list and include the blank cells", vbInformation, "OzGrid.com"
[Code] ........
I have a formula
=LEFT(L2,FIND(".",L2,1)-1)
I need a macro to copy this to the last blank cell in the column, the last blank cell will be different each month otherwaise i would have just been able to enter a range L2:L6000.
How do I make this to work with dynamic range instead running for complete column? For example: Run this code until last active cell in Column A. Column A will always has value so if cell A25 is last active cell in range then this code should stop executing for column R25. So execution of this code would depend on active cell in column A.
Columns("R:R").Select
Dim Cell As Range
For Each Cell In Selection.Cells
If Cell.Value = True Then ' if true do nothing
Cell.Value = ""
ElseIf Cell.Value = False Then ' if false change to Null
Cell.Value = "Null"
End If
Next
I would like to automatically color fill a series of rows based on like information from a single column. When the information in the column changes then the rows would either stop filling (this would be best) or fill with a different color until the information changes again.
Summary: series of alternating rows would either be filled or unfilled based on changes from the column information.
Hope this isn't too confusing. Below is an example except I would want the cells filled, not the text or numbers to change. The highlight is changing based on the changing of the numbers.
ABCD 12345
ABD 12345
ABCD 12349
ABDF 12349
ABCD 12358
ABF 12358
I have a userform that I am using to populate a column with data. I have the following code to find the next blank cell on the first row to enter the data from the first textbox in the userform
ActiveSheet.Range("av1").End(xlToLeft).Offset(0, 1).Value = TextBox1
I was then going to populate the rest of the cells in the column by changing the range "A1" to "A2" and so on. The problem I have is that not all of the cells have a compulsory entry so when the end(xlToLeft) function may not always end in the same column and the data will be staggered.
First Entry
A B C D E
1X
2X
3X
4
5X
Second Entry
A B C D E
1XY
2XY
3XY
4Y
5XY
What I want to do is find the first blank cell in the first row, as that will have a compulsory entry, and then fill the rest of the cells in the same column. So if the first blank cell is D1 i want to go down then D2,D3,D4 etc.
I can do it going across the rows but cannot figure it out using columns.
I have the following data:
Excel 2010ABCDEF2Subset 13datadatadatadatadata54datadatadatadatadata65Subset 26datadatadatadatadata47datadatadatadatadata48Subset 39datadatadatadatadata410datadatadatadatadata411datadatadatadatadata412datadatadatadatadata4Sheet1
I would like to count up from the last row and color row with blank cells in column F light blue, but only through Column F. THe result would look something like this:
Excel 2010ABCDEF2Subset 13datadatadatadatadata54datadatadatadatadata65Subset 26datadatadatadatadata47datadatadatadatadata48Subset 39datadatadatadatadata410datadatadatadatadata411datadatadatadatadata412datadatadatadatadata4Sheet1
I'd like a macro that does 3 things..
1. Find the last row (cell) of data in the "Customer Number" column. This search should be by the name "Customer Number" rather than by column letter because the column that "Customer Number" will be in can change.
2. Find the column named "Purple" (also by name for same reason)
3. If the "Purple" column has no blank cells in those same number of rows as the "Customer Number" column, delete the whole "Purple" column.
I've recorded and edited a macro for a worksheet I have, but there is one function I can't figure out - if it can even be done.
My sheet has 134,000 rows of data extending to column AS but, in column K, I have approximately 9 - 10,000 empty cells. I need to delete the entire row of data where there is an empty cell in column K. Can this be written into the macro?
I'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this: http://msdn.microsoft.com/en-us/libr...8(VS.80).aspx:
View 2 Replies View Relatedhow I can alternate the background color (fill color) of rows in a spreadsheet. Say I wanted every other row to be gray starting at row 10.
View 6 Replies View Relatedi want to delete entire row if Column C2:C1000 are blank
e.g if range c2:c100 have data then delete the rows C101:C1000
I need a code that will delete an entire column (J) if J6 is blank.
View 3 Replies View RelatedI am using the following macro to delete "completely empty" rows. I also need to delete some rows if a cell in column B has no value. How would I change this macro?
' DeleteBlankRows
Dim r As Long
Dim C As Range
Dim Rng As Range
On Error GoTo EndMacro
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
If Selection.Rows.Count > 1 Then
Set Rng = Selection
Else
Set Rng = ActiveSheet.UsedRange.Rows
End If
For r = Rng.Rows.Count To 1 Step -1
If Application.WorksheetFunction.CountA(Rng.Rows(r).EntireRow) = 0 Then
ActiveSheet.Rows(r).EntireRow.Delete
End If
Next r
EndMacro:
Example :
I want to Delete the Blank Column.
Click the image to view large
I am trying to delete rows that do not have values in column B. This is a quote form that takes up over 1000 rows but not all are needed (ie lines that do not have any value in B "qty"). Is there a way do have excel delete these without doing it manually?
View 3 Replies View Relatedway to find blank cells in a column(s) and delete the rows corresponding to the cell number. I found this code in one of the previous threads on ozgrid but it just doesnt work for me because it is slowing me down. Please help (I am working on around 60000 rows in Excel 2007)
Sub DeleteBlankARows()
With Application
.Calculation = xlCalculationManual
. ScreenUpdating = False
Dim r As Long
For r = Cells(Rows.Count, 11).End(xlUp).Row To 1 Step -1
If Cells(r, 11) = "" Then Rows(r).Delete
Next r
.Calculation = xlCalculationAutomatic
.ScreenUpdating = True
End With
End Sub
a way to do the reverse viz. for a particular column, I'd like to delete the row corresponding to the non-blank cell in the column.
Yes thats exactly what I am looking for. deleting rows if a cell in a particular column is not empty/has data.
View 7 Replies View Relatedwith performing the following tasks with VBA:
1). For each cell that in the range that has a Red background delete the entire column
I have attached a sample spreadsheet where I have tried to do this. It's not quite working. It does not seem to work when there are RED cells next to each other.
I know that I can do a simple thing like column("A:A"), but I'd rather have it in a loop as in the sample code, in case the columns change in the future.
2). The second task is to delete the rows in the spreadsheet where the first cell in the row is a blank.