I have a formula
=LEFT(L2,FIND(".",L2,1)-1)
I need a macro to copy this to the last blank cell in the column, the last blank cell will be different each month otherwaise i would have just been able to enter a range L2:L6000.
I have a userform that I am using to populate a column with data. I have the following code to find the next blank cell on the first row to enter the data from the first textbox in the userform
ActiveSheet.Range("av1").End(xlToLeft).Offset(0, 1).Value = TextBox1
I was then going to populate the rest of the cells in the column by changing the range "A1" to "A2" and so on. The problem I have is that not all of the cells have a compulsory entry so when the end(xlToLeft) function may not always end in the same column and the data will be staggered.
First Entry
A B C D E
1X
2X
3X
4
5X
Second Entry
A B C D E
1XY
2XY
3XY
4Y
5XY
What I want to do is find the first blank cell in the first row, as that will have a compulsory entry, and then fill the rest of the cells in the same column. So if the first blank cell is D1 i want to go down then D2,D3,D4 etc.
I can do it going across the rows but cannot figure it out using columns.
I need to clear a value in a cell(what ever may be the value) based on a condition in another cell and set it to blank. Ex: If cell A is blank and then i need make cell B also blank, if cell A has some value then i should not disturb B I need to do this using formula. I have tried the below, but no use, IF(AA1="",REPLACE(Y1,1,10,""))
View 2 Replies View Relatedi want to fill down a column and instead of my formula changing from A6 to A7 i want it to change to B6.
View 9 Replies View RelatedA
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
If A1 has a value of ABC,
A2-A5 are blank
A6 has a value of DEF
A7-A10 are blank.
Is there a formula that will fill A2-A5 with ABC,
look at the value of A6 and see that it is different from A1-A5,
or not blank,
change the fill value to the new value, A6,
then fill down the value of A6 into A7-A10
instead of manually using the fill handle?
I am trying to add the following code to fill in a certain range only if the range is blank. I can get it to fill in with the formula but it will still enter over if the cell already contains information.
Code:
Sub YTD()
Dim isempty As Boolean
isempty = True
For Each cell In Sheets("YTD%").Range("December").Cells
If cell.Value! = "" Then isempty = False
[Code] .......
I have been using this code I found awhile back to fill blank cells in a column with the preceding value. but it leaves the very last cell blank. Like this.
A
B
41055182
905182
41054750
905182
[Code] ........
Is there a way to add possibly a "Do until column B is null or """?
Code:
Sub FillBlanks()
Dim rRange1 As Range, rRange2 As Range
Dim iReply As Integer
If Selection.Cells.Count = 1 Then
MsgBox "You must select your list and include the blank cells", vbInformation, "OzGrid.com"
[Code] ........
How do I make this to work with dynamic range instead running for complete column? For example: Run this code until last active cell in Column A. Column A will always has value so if cell A25 is last active cell in range then this code should stop executing for column R25. So execution of this code would depend on active cell in column A.
Columns("R:R").Select
Dim Cell As Range
For Each Cell In Selection.Cells
If Cell.Value = True Then ' if true do nothing
Cell.Value = ""
ElseIf Cell.Value = False Then ' if false change to Null
Cell.Value = "Null"
End If
Next
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
In my excel sheet, data present in the column are in dynamic range. After that I want to delete or clean all blank column which is bordered and in fill color. What VB program I have to write.
E.g. if data is present upto column 'J', then I have to clean all columns from 'K' onwards..(where bordered and fill color there)
I have lot of data in column B. I need to copy the first cell and paste content to next ones before empty cell.
Replacing xxx with the data in first cell all the way to the end of column B.
Before:
After :
123-1
123-1
xxx
123-1
[Code] ........
I am using this formula:
=IF(INDIRECT($E$1&"!$B4")=0,"",IFERROR(INDIRECT($E$1&"!$B4"),""))
Now, if that cell happens to be blank, I want it to be grey. But if data is drawn into the cell, I don't want it to be grey.
I have a worksheet with a column with words, but a lot od the cells are empty. I want these replaced with the word above. I know I can do this with fill handle, but as there are thousands, it would help with a routine - a program - that I could run on the column and thus fill out all the empty cells.
View 12 Replies View RelatedI need to automate a conditional fill down in excel. I have a sheet, some of the columns have rows of empty cells (the amount of empty cells varies). Whenever there is an empty cell I need to fill down, however when a new value is encountered that must then be filled down and so on. This bit I have as:
Set rngWBSv1 = Range("c2", Range("c65536").End(xlUp))
For Each clWBSv1 In rngWBSv1
If clWBSv1.Value = "" Then clWBSv1.Value = clWBSv1.Offset(-1, 0).Value
Next clWBSv1
Set rngWBS2 = Range("d2", Range("d65536").End(xlUp))
For Each clWBS2 In rngWBS2
If clWBS2.Value = "" Then clWBS2.Value = clWBS2.Offset(-1, 0).Value
Next clWBS2 ......................
I am trying to fill down data in columns A:C but only if there is data in column D. I have butchered VBA into this working bit but the fill down stops too early.
Sub fillall()
Set x = Worksheets("Paste"). Range("A3", "c3")
Do
Range(x, x.End(xlDown).Offset(-1, 0)).filldown
Set x = Range(x.End(xlDown), x.End(xlDown).Offset(0, 2))
Loop Until x.End(xlDown).Offset(0, 3) = 0
End Sub
I'm trying every conceivable angle I can think of in vba and coming up empty. What I have is a spreadsheet similar to this:
Column A Column B
1. 1234567
2. 2345678
3. 3456789
4. 4567890 A0001
5.
6. 9876543
7. 9876543
8. 9876543
9. 1234578
10. 3456789 A0002
What I would like to do is to fill in B1:B3 with A0001 and B6:B9 with A0002. The number of rows in each set of data will vary, but the identifier (A000X) will always be located in the row in column B adjacent to the last entry for that set of data in column A and there will always be empty cells between data sets. The number of data sets will also vary.
Any other way of subtotaling data. I am an inventory analyst and do monthly/quarterly totals and averages of inventory used, and need a quick way to fill the blank cells with the part # that is below them, as shown below. I need the part #'s so I can then use CONCATENATE() and pull data from multiple time periods so the part #/year will match up down the page.
FILL P100012008360 FILL P100012009286 FILL P10001201072P10001718 FILL P1000220089,075
FILL P1000220091,124 FILL P1000220103,225 FILL P1000220116,375P1000219,799
FILL P10002PL20089,234 FILL P10002PL200912,150P10002PL21,384
I have a small challenge, where I am trying to fill blank cells with the data from the last populated cell above.
However, I need it to be able to automatically recognise when a manual entry has beed actioned down the column and recalculate for below that cell with the new data.
The data in the cell is selected from a drop down. I want it to populate all the cells below, until the next drop down is selected. And automatically repopulate them all when it is selected.
E.g. Cell C8 has the value "DATA" selected, and everything below is autofilled with "DATA", but when I select cell C12 with different drop down list value "VALUE", all the cells below stay as "DATA" because they are obviously no longer blank.
What I need if C9 - C11 to remain filled with 'DATA" and from C13 to auto fill with the newly selected value "VALUE".
Need this to happen for as many rows and data selections from the drop down as needed (endless).
I have used:
Code:
Sub FillEmpty() Application.ScreenUpdating = False Application.Calculation = xlManual Dim cell As Range For Each cell In Intersect(Selection, _ ActiveSheet.UsedRange) If Trim(cell) = "" And cell.Row > 1 Then cell.NumberFormat = cell.Offset(-1, 0).NumberFormat cell.Value = cell.Offset(-1, 0).Value End If Next cell Application.Calculation = xlAutomatic 'xlCalculationAutomatic Application.ScreenUpdating = False End Sub
which does the auto fill, but won't change the cells below once one of them has been updated.
Info:
Drop down list has 31 possible selections at the moment
Starts at Cell C8
Needs to be flexible enough to add an indeterminate number of rows, and additional items to the drop down selection.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI am working on a spreadsheet and I need values from Sheet1!a2, a7, a12, a17 etc...
I want to fill in the formula ='Sheet1'!a2 etc, to fill column A in sheet2!
When I highlight and drop down to fill excel fills the column in increments of five like i need but doesn't start on the right one. Instead it fills the formula as ='Sheet1'!a6, (For cel A1) and ='Sheet1'!a11, (for cell A2) and so on.
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
Is there some easy way to fill out column B referencing column A, but only incrementing by 1 row in A every 2 cells in B?
Example:
Column A:
A1 = 1
A2 = 2
A3 = 3
etc...
Column B (I would like to fill this, referencing column A):
B1 = A1
B2 empty
B3 = A2
B4 empty
B5 = A3
etc
I want my column to be populated by formula using VBA. Let's say on row1, the formula is = SUMIF(mysheet!$L:$L,$A1&C$1&"09",mysheet!$M:$M). And on row 2, the formula is
=SUMIF(mysheet!$L:$L,$A2&C$1&"09",mysheet!$M:$M). And on row 3, the formula is =SUMIF(mysheet!$L:$L,$A3&C$1&"09",mysheet!$M:$M). And this is done up to the last row. How do I do this?
I have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
I have a value in A1 and I have a constant formula from Column C to G. what I want to do is if column A has no value then Column C to G should not have values. If column A has values then Column C to G should calculate the values. I have a sample excel attached. I can't figure out what to do! I've tried conditional formating but dosn't seem to work
View 6 Replies View RelatedI am trying to have some automation to my WS and what I want to do, is if a certain column (column 104) is changed, it will fill out that column with the data entered as long as the account is the same (column 5). Here is the code I tried, but realized very quickly, it puts me into a loop. This is being called by a change worksheet fuction
If Target.Column = 104 Then
If IsEmpty(Target) Then
Else
testacct = Cells(Target.Row, 5)
temptest = testacct
s_TempSwitch = Target.Value
Testoffset = 0
Do While temptest = testacct
temptest = Cells(Target.Row + Testoffset, 5)
Cells(Target.Row + Testoffset, 104).Value = s_TempSwitch
Testoffset = Testoffset + 1
Loop
End If
End If
I am trying to insert formulas to my cells in different columns and then fill down the formulas as many rows as in the reference column. So far I have put my formulas in a macro but I seem to get problems with " and ' symbols. My macro looks like this:
Sheets("Sold Articles Database").Select
Range("U3").Formula = " =VLOOKUP(LEFT(K3,2),'Input Variables'!$A$48:$B$52,2,FALSE)"
Range("V3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$C$10000,3,FALSE)"
Range("W3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$D$10000,4,FALSE)"
[Code] ........
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
I have a spreadsheet where coloumn A contains either a blank cell, or a "X". There may be anywhere from 1 - 10,000+ "x"'s, spaced in col. a, but they are not spaced evenly, for example A1 may have an "X" A3,A4, A25, A28, etc... I need to find a way to merge the cells from the X to the row above the next "X" (so the X, and all blank spaces below it).
View 7 Replies View Related