Delete Rows With Decimals?
Dec 17, 2012
I have created a worksheet to figure out (in this case) how many sets of Buckyballs i need in order to get both a square number and a cube number. There are 216 balls per set. My worksheet so far has:
Sets Number of balls Square Cube
(Number of sets) (Sets*216) (Number of balls ^0.5) (Number of balls ^(1/3))
The problem is that I am looking for the number of sets required to produce an integer in both Square and Cube columns. I have figured out that I can circle all values that are not integers. I am looking for a way to delete all rows with a decimal value or at least all cells with a decimal value and I can delete the rows from there.
View 1 Replies
ADVERTISEMENT
May 11, 2007
I get a report several times a week consisting of several columns and some hundred rows. There must be no comma signs in column E but the reports that I get will sometimes have commas in Col E anyway.
I have a macro/vba code in another workbook that I start by a keyboard combination. This macro will adapt the look of the report, but it can't take care of the comma issue. However, I have managed to remove the comma and replace it with nothing but that is not sufficient. I want to delete the comma and all figures to the right of the comma sign. There can between 1 and 4 decimal numbers.
I need to integrate some kind of vba code that will check every cell in column E and if it finds a comma in any cell, the comma must be deleted and all the numbers to the right of the comma too.
Hope you can help me with this issue because I have been googling around for two days now... It drives me crazy.
I have posted this question here too but it has not yet been solved:
View 9 Replies
View Related
Apr 22, 2014
I've got a spreadsheet that's basically a large list of numbers, both whole and decimal. For example, let's say this is in cells A1-A5:
4
0.65
1.34
3
8.2
Is there a formula to get rid of all of the whole numbers but leave the decimals? (What I mean by that is I don't need 4 or 3 as they're whole, but I need the decimals to be left alone).
I know it's probably a really awkward question but I have over 2,000 lines to go through, it will take a long time to do manually.
Perhaps if it's not possible to a formula to delete entries, maybe just make all whole numbers say something like "NO", so that I can sort the column in A-Z order and delete all of the 'NO's quickly by highlighting them all together.
View 5 Replies
View Related
Oct 29, 2008
I am trying to convert Degrees Minutes & Decimals of a minute (12° 34.567') to Degrees and decimals of a degree (12.57611°). I have the formula to convert latitude, that is two digits, but it doesn't want to work with longitudes, three digits. (see attachment). This is the formula that I am using:
=IF(A2="","",(INT((LEFT(A2,3)+MID(A2,4,6)/60)*100000)/100000)&"d")
View 2 Replies
View Related
Jul 15, 2009
1. Remove J,K,N,A Columns,
2. In the last O (TIMESTAMP) column, the date is 14-Jul-09 format change it to 07/14/2009 (this format mm/dd/yyy
3.Filter L column (VAL_INLAKH) Remove all rows from whole sheet which has 0 value
4. Column C (EXPIRY_DT) date format is 24-Sep-09 , "dd-Sep-09" change to "Sep" only
5.Merge Column B,C,D,E (SYMBOL.EXPIRY_DT.STRIKE_PR.OPTION_TYP
respectively )
View 3 Replies
View Related
Sep 25, 2012
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies
View Related
Apr 16, 2014
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
View 5 Replies
View Related
Apr 3, 2014
In my excel I'm copying rows upon specific criteria to another tab.
The question is how I can delete copied rows and update the original tab without empty rows? (N of rows is always changing)
View 14 Replies
View Related
May 22, 2008
Is there a limit on the number of rows and columns that can be deleted in a macro on Excel 2003? I am trying to create a macro that, amoung other things, delets 1119 rows and 54 columns. If I delete the columns first, the rows will not delete. If I delete the columns first, the rows will not delete.
View 12 Replies
View Related
Feb 20, 2008
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
View 4 Replies
View Related
May 10, 2012
I need a macro that can look at multiple (say three) rows and delete those rows if they match another three rows in the worksheet.
For example:
1 0
3 1
5 7
4 4
6 5
8 3
1 8
5 2
3 9
6 5
8 3
1 8
7 5
If three rows are the same, then one set is deleted (it can be either bottom or top set). I would like to do this for rows 1-500 in the worksheet.
View 1 Replies
View Related
Sep 30, 2008
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
View 9 Replies
View Related
Aug 28, 2007
I have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
View 2 Replies
View Related
Feb 20, 2008
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5
123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
View 2 Replies
View Related
Jun 21, 2008
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
View 9 Replies
View Related
Nov 5, 2006
Need to solve my problem in the thread "Type Mismatch Error Message". Now a new problem has come up in the same code, so - according to the rules - I've started a new thread. (This one is most likely due to my poor knowledge of VBA syntax).
Sub Delete_invalid_rows()
Dim i%, j%
Dim Nr%, valid As Boolean, BYPdata As Boolean
Dim ar1 As Variant
Dim ar2 As Variant
Dim ar3 As Variant
Dim ar4 As Variant
Nr = 20
ar1 = Array(11, 14, 19, _
20, 22, 25, 26, 27, 28, 29, _
30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, _ .................
View 2 Replies
View Related
Mar 5, 2008
This sheet has A:K columns and 1:3212 rows. There are 'page headers' that are in the text file that I want to delete (the text file was exported from an AS400 program). The first row that starts the page header has SA341 in column 1. Each page header has 5 rows. I used this code from one of the other threads on deleting rows, but I obviously do not understand the code as it deleted all rows that contained SA341.
Sub DeleteRows()
Column_To_Check = 1
Start_Row = 1
End_Row = ActiveSheet. Cells(Rows.Count, Column_To_Check).End(xlUp).Row
MsgBox End_Row
Search_String = "SA341"
For Row_Counter = End_Row To Start_Row Step -1
If ActiveSheet.Cells(Row_Counter, Column_To_Check).Value < SA341 > Search_String Then
ActiveSheet.Rows(Row_Counter).Delete
End If
Next Row_Counter
End Sub
View 9 Replies
View Related
Jun 20, 2008
I am copying a price list from a worksheet. I currently have a script that deletes unwanted rows (products) but these products' header rows' are left. I also want to delete these text based headers. One solution might be a script that reads a columns cell value in the row(s) below and if values are missing the header row should be deleted.
View 2 Replies
View Related
May 9, 2014
I would like to write a macro button, in order to lookup through col. "D" and where find same invoice number (invoice number combine with 3 letters plus dash), should sum the corresponding rows' amounts in col."J" into one row and the other row should be deleted.
View 3 Replies
View Related
Jun 28, 2007
I have a sheet as shown in the picture below. If the cells in Column N has some values that are the result of some calculations. How ever if there are more than one of it, the entire row has to be deleted.
Eg:The value in Column N 816.323 has 3 rows below each other.Only one has to be there.There can be upto 10 values one after other in this way.
I tried to write a progrma by using loops and cehcking if ther is value in the cell,go to cell below and if there is value,delete the row in a loop of 10 times.But it didnt work
View 6 Replies
View Related
Nov 17, 2007
I have a workbook where I import data from another workbook. This might get done several times a month. As I go through the imported data I delete rows not needed which gets place into another worksheet. What I need is when I import data again is a macro that the worksheet where my already deleted rows are and compairs them to the new data imported and if the first 13 columns of data matches it delest them off the imported sheet.
I found some code which I altered at [url]
and posted the same question but haven't got any response as of yet.
So the code that i go works but only if the row matches in the exact order on both sheets so e.g. (if row 1 on sheet1 matches row 1 on sheet2) it works but if (row1 on sheet1 matches row 3 on sheet2) it does not.
Here's the code I have so far.
Public Sub delOLD()
Dim i As Long
Dim iLastRow As Long
Dim ws As Worksheet, ws1 As Worksheet
Set ws = Sheets("Data") ' Imported Data
Set ws1 = Sheets("Old Records") ' Deleted Data
'ws1.Visible = xlSheetVisible
View 4 Replies
View Related
Jul 17, 2014
I am creating a graph with a wide range of values (0.06 - 300). The smaller values are barely visible on my column graph. I have tried all of the tricks I know. Any way to get the smaller values to show up instead of just hovering towards the bottom of the graph?
View 9 Replies
View Related
Oct 14, 2009
I am trying to get an exact ratio in excel but am unable to do so. Example:
60,000/58000 = 1.03. The ratio should then be 1.03:1. But excel is showing this is 1:1. Here is my formula
PHP
=TEXT(E55/E56,"0")&":1" . I need it to show it to two decimals.
View 2 Replies
View Related
May 23, 2014
I have some problem when I would like to sum only positive decimals on userform, I would like to separate the numbers with comma (",") and sum them, the format should be "0,0" and only numbers and "," can be given in textboxes. How should I do this?
View 3 Replies
View Related
Feb 8, 2009
A spreadsheet created by exporting from QuickBooks as a .IIF file is opened in Excel 2003.
A macro multiplies a cell value and returns 1.77999997138977 rather than 1.78. The 1.78 is required for importing back into Quickbooks.
Part of the code is: ...
View 13 Replies
View Related
Dec 16, 2009
i am looking for some formula to round off a decimal number
e.g. A1=8.288
if I use the formula ROUND(A1,2) the result is 8.29.
But I am looking for a result 8.288. That means it shoukd not round off rather the after decimal we should have only two numbers.
8.288 should be 8.28
27.4627 should be 27.46
View 6 Replies
View Related
Feb 4, 2007
i have columns of prices in 2 decimal format that I'd like to manipulate, some prices are whole dollars(no cents & no decimals ) and most are dollars and cents in decimal format-- but to do it successfully, i need the decimal removed. I looked at the "format" function but it doesn't seem to allow for that.
is there any way I can have these prices converted to "cent" format( ie removing the decimal, where applicable), showing them not as "dollars & fractions" but as "cents" i'm sure that would solve the problem for me last time I did it by hand and vowed there had to be an easier way!
View 9 Replies
View Related
Mar 30, 2007
I am trying to put together a code so that when a user enteres more then two decimal points in the cell value they should get a warning regardless if they formatted the cell to show 2 decimals or not...
Simply the problem is on the sheet I have a lot of people format the cell to show two decimals but when you copy and paste the cell values to other sheets the decimals are still there which causes problems.
I am intermediete in VBA so if someone can shoot me some example codes I think I can make it work on my sheet.
View 9 Replies
View Related
Jan 4, 2008
I am trying to combine to cells containing percentages, however when I do the percentages turn into decimals. I have tried using the text funtion, but that just returns the full number 1, no decimals or percentages.
View 9 Replies
View Related
Jul 22, 2008
I'm copying a column range containing numbers with varying decimals from one worksheet to another. The new worksheet and column are set to have no more than two decimals places in the cells through the formatting options.
However, numbers stay showing their original amount of decimal places, so I tried hard-coding the format with:
Sheets("Toolset Scorecard").Columns("G:G").NumberFormat = "0.00"
View 9 Replies
View Related
