Ratio With Decimals?
Oct 14, 2009
I am trying to get an exact ratio in excel but am unable to do so. Example:
60,000/58000 = 1.03. The ratio should then be 1.03:1. But excel is showing this is 1:1. Here is my formula
PHP
=TEXT(E55/E56,"0")&":1" . I need it to show it to two decimals.
View 2 Replies
ADVERTISEMENT
Oct 29, 2008
I am trying to convert Degrees Minutes & Decimals of a minute (12° 34.567') to Degrees and decimals of a degree (12.57611°). I have the formula to convert latitude, that is two digits, but it doesn't want to work with longitudes, three digits. (see attachment). This is the formula that I am using:
=IF(A2="","",(INT((LEFT(A2,3)+MID(A2,4,6)/60)*100000)/100000)&"d")
View 2 Replies
View Related
Sep 25, 2007
I'm trying to create a quote... basically I need to find out about calculating ratios.
We have 47 students going on a trip to different venues, we offer 1:10 teachers (i.e. one teacher free, for every ten students going), however some venues offer a different ratio e.g. 1:5 teachers free of charge.
I need to somehow create a column where it will calculate the amount charged for the different ratios the venues offered.
View 9 Replies
View Related
Mar 28, 2014
On the attached worksheet i have blocks of data in col C in chronological order,i wish to count the number of times related data in col AG is between 1 & 3 incl (highlighted in blue) ,the result to be expressed as a % in col V,eg block A =5,col AG has 2 event between 1 & 3,so col V = 40%.I have inserted empty rows between the data for clarity,there are no empty rows in the data.
View 1 Replies
View Related
May 23, 2013
What is the best Aspect Ratio for a dashboard 4 X 3 or 6 X 9.
View 3 Replies
View Related
Mar 2, 2013
I'm working on a plan with the objective to reach a 20:80 ratio from Team 1 to Team 2
The intent of the is get 80% of the work to be supported by Team 2, which currently has no team members.
Team 1 currently has 32 team members.
I am trying to to determine if I need to hire or re-deploy employees to from one team to another or to another program to achieve the objective.
The objective is to take Team 1, which is currently doing 100% of the work & reduce that work load to approximately 20%, which then Team 2 will be supporting approximately 80%.
I started a generic calculation but I believe it's wrong.
View 3 Replies
View Related
Sep 30, 2003
I have a spreadsheet that calculates Reward to Risk Ratio for the stock market investing. The formula is Target Price - Entry Price / Entry Price - Stop out Price.
The problem is the ratio often comes out to something like 3/4 or 7/8.
Is there a way to reduce the result down so that the first number is always a 1 to make it more clear but still maintain the ratio. For example, 1-1.3, or 1-7.8, etc.
View 9 Replies
View Related
Feb 14, 2007
can Excel make a Ratio of the results of one column against another ?
eg, Col A 2.00
Col B 1.00
in Col C, the ratio result is 2 : 1
View 9 Replies
View Related
Feb 18, 2008
Assign values to ratio buttons
I have created a UserForm in Excel, to gather data for a questionnaire.
For each question, the user must select an answer from a radio button (Yes, No and N/A)
When I add the record (answers) to the sheet1, the results are shown as all being false.
I want to show either ‘Yes’ or ‘No’ or ‘N/A’
Private Sub CommandButton2_Click():
Dim LastRow As Object
Set LastRow = Sheet1.Range("a65536").End(xlUp)
LastRow.Offset(1, 1).Value = UserForm1.OptionButton1.Value
LastRow.Offset(1, 1).Value = UserForm1.OptionButton2.Value
LastRow.Offset(1, 1).Value = UserForm1.OptionButton3.Value
End Sub
View 9 Replies
View Related
Jul 13, 2006
Need formula to calculate employee turnover ratio and if there is a place to get a free template to download?
View 9 Replies
View Related
Nov 11, 2012
I have a userform that opens up to full screen, however, when i designed it everything is central and in its place, but when the userform opens full screen everything is pushed to the left and not using all the form.
I know that in VB2010 u can use docking and table layout panels for this sort of thing but VBA 2007 which I am using with excel doesnt seem to have these options?
View 1 Replies
View Related
Jul 29, 2014
with the following formula.
I need to find the median of Column C and Column H and then divide the median sum of Column C by the median sum of Column H. My data contains blanks so I obviously need to count cells with data only. I am trying to avoid hard coding any cells and am looking for a single formula.
View 1 Replies
View Related
Sep 27, 2011
below is my coding, it inserts a picture into a cell and fits to what ever the cell size is.
my cells are more landscape (fixed) than portrait, how can i still make the images fit into the cell height wise but keep a aspect ratio of a portrait picture.
Sub InsertPicture1()
Dim myPicture As Variant
myPicture = Application.GetOpenFilename _
("Pictures (*.gif; *.jpg; *.bmp; *.tif),*.gif; *.jpg; *.bmp; *.tif", , "Select Picture to Import")
If myPicture = False Then Exit Sub
Application.ScreenUpdating = False
[Code] ........
View 6 Replies
View Related
Aug 24, 2012
I'm haven't played with stats in a while and now I'm trying to determine the ideal traffic/labor hour in order to maximize revenue/labor hour. My data looks like this:
Excel 2010
A
B
C
D
E
F
1
Date
Traffic
Revenue
Hours
Traffic/hr
Revenue/hr
[Code] ........
Sheet1
I don't know if Excel or Analyst Toolpak has the firepower for this or if I'll need additional tools.
View 5 Replies
View Related
Jan 17, 2008
I can’t seem to work out the formula for calculating a ratio using the data in the pivot table.
I’ve added a column next to the pivot table to work out the ratio between to columns.
=SUM(B11/C11)
But what if there is no data in cell (B11), I want to return a “ “ (blank space)… but it returns a #DIV/0!
View 14 Replies
View Related
Aug 7, 2008
I am trying to create a spreadsheet to calculate the macro nutrient ratio of foods based on carbohydrates, proteins, and fats and how many units/servings I eat of each. I've attached the file I've started. It's fairly straightforward and simple, thus far.
I would like to be able to associate a food with its various nutritional data in its row (fat, carbs, sugar, fiber, sat. fats, protein.. etc.). With all of my food items entered, I would like to be able to choose from a list, have it prompt me for how many units I've eaten then plug it into my formula to calculate totals and ratios.. The final flow should go soemthing like this...
1. Select a food from a list (each food on the list has its associated characteristics)..
2. Select how much ( each food will have an associated serving size i.e. 1/2 cup, 1oz..) ---- (4) oz VS. entering each unit in A1
3. Make these totals of each characteristic feed into my final chart with which to track and graph.
View 4 Replies
View Related
Aug 24, 2006
I have what may be a math question as much as an Excel question. See my attached spreadsheet example in which I grow the denominator of a ratio by a fixed percentage until it equals or exceeds the numerator. This results in the denominator being grown X number of times.
View 2 Replies
View Related
Jul 25, 2014
I have added 3 tables data .. also I had created a sample solution calc for emp1 and project1 ... I need to calculation the ratio between the months based on the working days and allocate the efforts accordingly.
View 2 Replies
View Related
Jul 17, 2014
I am creating a graph with a wide range of values (0.06 - 300). The smaller values are barely visible on my column graph. I have tried all of the tricks I know. Any way to get the smaller values to show up instead of just hovering towards the bottom of the graph?
View 9 Replies
View Related
May 23, 2014
I have some problem when I would like to sum only positive decimals on userform, I would like to separate the numbers with comma (",") and sum them, the format should be "0,0" and only numbers and "," can be given in textboxes. How should I do this?
View 3 Replies
View Related
Feb 8, 2009
A spreadsheet created by exporting from QuickBooks as a .IIF file is opened in Excel 2003.
A macro multiplies a cell value and returns 1.77999997138977 rather than 1.78. The 1.78 is required for importing back into Quickbooks.
Part of the code is: ...
View 13 Replies
View Related
Dec 16, 2009
i am looking for some formula to round off a decimal number
e.g. A1=8.288
if I use the formula ROUND(A1,2) the result is 8.29.
But I am looking for a result 8.288. That means it shoukd not round off rather the after decimal we should have only two numbers.
8.288 should be 8.28
27.4627 should be 27.46
View 6 Replies
View Related
Feb 4, 2007
i have columns of prices in 2 decimal format that I'd like to manipulate, some prices are whole dollars(no cents & no decimals ) and most are dollars and cents in decimal format-- but to do it successfully, i need the decimal removed. I looked at the "format" function but it doesn't seem to allow for that.
is there any way I can have these prices converted to "cent" format( ie removing the decimal, where applicable), showing them not as "dollars & fractions" but as "cents" i'm sure that would solve the problem for me last time I did it by hand and vowed there had to be an easier way!
View 9 Replies
View Related
Mar 30, 2007
I am trying to put together a code so that when a user enteres more then two decimal points in the cell value they should get a warning regardless if they formatted the cell to show 2 decimals or not...
Simply the problem is on the sheet I have a lot of people format the cell to show two decimals but when you copy and paste the cell values to other sheets the decimals are still there which causes problems.
I am intermediete in VBA so if someone can shoot me some example codes I think I can make it work on my sheet.
View 9 Replies
View Related
Jan 4, 2008
I am trying to combine to cells containing percentages, however when I do the percentages turn into decimals. I have tried using the text funtion, but that just returns the full number 1, no decimals or percentages.
View 9 Replies
View Related
Jul 22, 2008
I'm copying a column range containing numbers with varying decimals from one worksheet to another. The new worksheet and column are set to have no more than two decimals places in the cells through the formatting options.
However, numbers stay showing their original amount of decimal places, so I tried hard-coding the format with:
Sheets("Toolset Scorecard").Columns("G:G").NumberFormat = "0.00"
View 9 Replies
View Related
Mar 2, 2014
Let's say I have a set of values (A1:A10) where each contains a number, with a varied amount of decimal places (some may have 0, some may have 10)...how can I make a formula in cell B1 that averages A1:A10, ignoring the decimal places (rounding to the nearest whole number)
For example, if this was A1:A10
93.11
94
92.12321
95.1
96.7
98.1
99
100.03
88.6677
85.6675
If I did the Average (=AVG(A1:A10)), I would get 94.2498. But I don't want this, I want the formula to take into account the numbers rounded to the nearest whole number, meaning, I want to take the average of..
93
94
92
95
97
98
99
100
89
86
Which would give me a value of 94.3.. In this example, there isn't much of a difference, but I was simplifying the numbers for time sake
View 1 Replies
View Related
Jun 21, 2014
I want round off number to be with the decimals (usually decimals r discarded for round off feature). I ll be able to explain better with an example.
10.36+10.36= 20.72. If i round it up, it vl be 21.
what i am tryin is to get 21.00 after round off.
I prepare my bills in excel and after total of all products, if i get a decimal number, I would like it be rounded off to whole number with decimal and 00 at the end (eg. 21.00 instead of 21.27 or 22.00 instead of 21.77). I tried to change decimals but when I select 2 decimal places, it gives me the actual fig(eg. 21.27 instead of 21.00)
I am already using =sum for the total so cannot use another formula (as far as i know, 1 cell can have only 1 formula. Dunno if multiple can be used in a single cell).
View 7 Replies
View Related
Dec 10, 2007
I have a weird problem with Excel. It recognises all numbers as numbers but excluding the number 1. It is only recognised as text as well as a decimals, for example 3.4. So every time I try and add these values up it completely ignores 1 and decimals.
Have I modified a setting?
View 10 Replies
View Related
Jun 11, 2009
I'm converting metric to British values and have no problem with fixing the decimals when displaying the number. However, I'm wanting to CONCATENATE the unit of measure to the conversion and end up with 12 places beyond the decimal.
Entered formula is: =CONCATENATE(CONVERT(T5,"cm","in")," in")
Results in 159.055118110236 in
But = CONVERT(T5,"cm","in")
Results in 159.1 which is what I want.
View 2 Replies
View Related