Removing Decimals
Feb 4, 2007
i have columns of prices in 2 decimal format that I'd like to manipulate, some prices are whole dollars(no cents & no decimals ) and most are dollars and cents in decimal format-- but to do it successfully, i need the decimal removed. I looked at the "format" function but it doesn't seem to allow for that.
is there any way I can have these prices converted to "cent" format( ie removing the decimal, where applicable), showing them not as "dollars & fractions" but as "cents" i'm sure that would solve the problem for me last time I did it by hand and vowed there had to be an easier way!
View 9 Replies
ADVERTISEMENT
Jan 29, 2014
I have recived a CSV file with dollar amounts that need to be formated with out a deciaml and with our rounding. Example I need 12558.64 to be changed to 1255864.
View 3 Replies
View Related
Oct 29, 2008
I am trying to convert Degrees Minutes & Decimals of a minute (12° 34.567') to Degrees and decimals of a degree (12.57611°). I have the formula to convert latitude, that is two digits, but it doesn't want to work with longitudes, three digits. (see attachment). This is the formula that I am using:
=IF(A2="","",(INT((LEFT(A2,3)+MID(A2,4,6)/60)*100000)/100000)&"d")
View 2 Replies
View Related
Jul 17, 2014
I am creating a graph with a wide range of values (0.06 - 300). The smaller values are barely visible on my column graph. I have tried all of the tricks I know. Any way to get the smaller values to show up instead of just hovering towards the bottom of the graph?
View 9 Replies
View Related
Oct 14, 2009
I am trying to get an exact ratio in excel but am unable to do so. Example:
60,000/58000 = 1.03. The ratio should then be 1.03:1. But excel is showing this is 1:1. Here is my formula
PHP
=TEXT(E55/E56,"0")&":1" . I need it to show it to two decimals.
View 2 Replies
View Related
May 23, 2014
I have some problem when I would like to sum only positive decimals on userform, I would like to separate the numbers with comma (",") and sum them, the format should be "0,0" and only numbers and "," can be given in textboxes. How should I do this?
View 3 Replies
View Related
Feb 8, 2009
A spreadsheet created by exporting from QuickBooks as a .IIF file is opened in Excel 2003.
A macro multiplies a cell value and returns 1.77999997138977 rather than 1.78. The 1.78 is required for importing back into Quickbooks.
Part of the code is: ...
View 13 Replies
View Related
Dec 16, 2009
i am looking for some formula to round off a decimal number
e.g. A1=8.288
if I use the formula ROUND(A1,2) the result is 8.29.
But I am looking for a result 8.288. That means it shoukd not round off rather the after decimal we should have only two numbers.
8.288 should be 8.28
27.4627 should be 27.46
View 6 Replies
View Related
Mar 30, 2007
I am trying to put together a code so that when a user enteres more then two decimal points in the cell value they should get a warning regardless if they formatted the cell to show 2 decimals or not...
Simply the problem is on the sheet I have a lot of people format the cell to show two decimals but when you copy and paste the cell values to other sheets the decimals are still there which causes problems.
I am intermediete in VBA so if someone can shoot me some example codes I think I can make it work on my sheet.
View 9 Replies
View Related
Jan 4, 2008
I am trying to combine to cells containing percentages, however when I do the percentages turn into decimals. I have tried using the text funtion, but that just returns the full number 1, no decimals or percentages.
View 9 Replies
View Related
Jul 22, 2008
I'm copying a column range containing numbers with varying decimals from one worksheet to another. The new worksheet and column are set to have no more than two decimals places in the cells through the formatting options.
However, numbers stay showing their original amount of decimal places, so I tried hard-coding the format with:
Sheets("Toolset Scorecard").Columns("G:G").NumberFormat = "0.00"
View 9 Replies
View Related
Mar 2, 2014
Let's say I have a set of values (A1:A10) where each contains a number, with a varied amount of decimal places (some may have 0, some may have 10)...how can I make a formula in cell B1 that averages A1:A10, ignoring the decimal places (rounding to the nearest whole number)
For example, if this was A1:A10
93.11
94
92.12321
95.1
96.7
98.1
99
100.03
88.6677
85.6675
If I did the Average (=AVG(A1:A10)), I would get 94.2498. But I don't want this, I want the formula to take into account the numbers rounded to the nearest whole number, meaning, I want to take the average of..
93
94
92
95
97
98
99
100
89
86
Which would give me a value of 94.3.. In this example, there isn't much of a difference, but I was simplifying the numbers for time sake
View 1 Replies
View Related
Jun 21, 2014
I want round off number to be with the decimals (usually decimals r discarded for round off feature). I ll be able to explain better with an example.
10.36+10.36= 20.72. If i round it up, it vl be 21.
what i am tryin is to get 21.00 after round off.
I prepare my bills in excel and after total of all products, if i get a decimal number, I would like it be rounded off to whole number with decimal and 00 at the end (eg. 21.00 instead of 21.27 or 22.00 instead of 21.77). I tried to change decimals but when I select 2 decimal places, it gives me the actual fig(eg. 21.27 instead of 21.00)
I am already using =sum for the total so cannot use another formula (as far as i know, 1 cell can have only 1 formula. Dunno if multiple can be used in a single cell).
View 7 Replies
View Related
Dec 10, 2007
I have a weird problem with Excel. It recognises all numbers as numbers but excluding the number 1. It is only recognised as text as well as a decimals, for example 3.4. So every time I try and add these values up it completely ignores 1 and decimals.
Have I modified a setting?
View 10 Replies
View Related
Jun 11, 2009
I'm converting metric to British values and have no problem with fixing the decimals when displaying the number. However, I'm wanting to CONCATENATE the unit of measure to the conversion and end up with 12 places beyond the decimal.
Entered formula is: =CONCATENATE(CONVERT(T5,"cm","in")," in")
Results in 159.055118110236 in
But = CONVERT(T5,"cm","in")
Results in 159.1 which is what I want.
View 2 Replies
View Related
Dec 17, 2012
I have created a worksheet to figure out (in this case) how many sets of Buckyballs i need in order to get both a square number and a cube number. There are 216 balls per set. My worksheet so far has:
Sets Number of balls Square Cube
(Number of sets) (Sets*216) (Number of balls ^0.5) (Number of balls ^(1/3))
The problem is that I am looking for the number of sets required to produce an integer in both Square and Cube columns. I have figured out that I can circle all values that are not integers. I am looking for a way to delete all rows with a decimal value or at least all cells with a decimal value and I can delete the rows from there.
View 1 Replies
View Related
Feb 13, 2014
I'm going through financial statements and I would like to be able to run full blown analysis on them. Most public financial reports are written so that a lot of zero's do not take up the useful space. As such (and there is a ton of this solution out there I've found), many people want to take $1,500,000,000 and turn it into 1.5M
I however, do not. I want to convert it backwards. So when something says 5.19 I would like to format it in such a way that it will read (and I can run calculations against it) as 5,190,000,000 (there are no alpha characters, there are instances where there will be negative numbers). Then I could copy this to the 17 different financial statements I've already got rock'n rolling in Excel right now.
View 4 Replies
View Related
Jun 11, 2009
I'm looking for a way to sort things with multiple decimals (version number). Is there a way to have something like this:
1.1
1.57
1.1.5
1.2
1.68.23
1.23.1
become:
1.1
1.1.5
1.2
1.23.1
1.57
1.68.23
I could do it all manually, but I have to work with like 400 entries at a time.
View 4 Replies
View Related
May 8, 2009
I've been trying to create an excel macro to calculate shortest route path using floyd algorithm..
Problem is, i can't figure out why this macro won't work with decimal numbers..
I'm pretty sure there's a VERY simple explanation for this..
Probably has something to do with excel's formating
See the attachment and press Run button, it won't produce the correct result, but if if you multiply all the numbers in "input" sheet by 100.
View 14 Replies
View Related
Jun 30, 2009
When I use this: ....
View 7 Replies
View Related
Sep 25, 2009
Can anyone help me with a code for converting decimal number to a nearest 1/16 th fraction. For example converting number 2.1875 to 2 3/16 and so on...Also if it is 2.5 it should display 2 1/2...
View 14 Replies
View Related
Jul 10, 2009
When I set my cell for Numbers it wants a decimal place. If I set it to 2 decimals then 100.1 (One hundred point one) would look like 100.10 (and print 100.10). If I use 100.10 (One hundred point ten) it looks and prints 100.10. If I set the decimal to one then the problem is reveresed.
Setting to General looks like 100.10 (One hundred point ten) but when using VBa to match numbers it is matched to 100.1 not 100.10.
Now I have it set to Text, but I see when I replace (find & replace) values like find 100 replace 99 the 100.10 becomes 99.1.
Incedently I have a macro that compares (and copies cell values) numbers from one sheet to another and occasionally it skips a number, always a decimal value like 100.10 or 100.1. Or any thing x.10, x.1, x.3, x.19 any combination of x.x or x.xx.
Is there a way to format so decimal numbers are decimal numbers and trailing zeros arent omitted? If the value is one decimal I want one decimal, if its two decimals I want two decimals.
View 5 Replies
View Related
Nov 9, 2013
I am trying to round up the total sum of time to the quarter hour. I enter time in fields as follows:
WORKSHEET SETUP:
Column B: Time I begin working
Column C: Time I end working
Column D: Total time C minus B
Cell format for columns B and C: H:MM AM/PM
Cell format for calculated field in column D: H:MM
Calculation, column D to show total time on a daily basis: =IF(C6>0,C6-B6,"")
However, I want to calculate total time per month in decimals, rounded up to the nearest quarter hour.
Example:
I worked 5 minutes (I do not want to reflect 15 minutes for five minutes of work). When I total time for the entire month (total daily time in column D), I would like that total to reflect total Hours:Minutes rounded up the quarter hour - but in decimals!
Assuming this is possible, how should I format cells, and what would the formula be for the total of hours per month?
View 5 Replies
View Related
Feb 12, 2014
I have fractions and whole numbers in a column as per the following.
E13 = 3/4
E15 = 5
E17 = 1-1/2
I can use the formula =SUBSTITUTE(E17,"-"," ")+0 which gives the correct result of 2.5 and also correct
for E15 with the answer 5.
But I'm stumped how to get it correct for E13 where it is less than whole number.
I can use the formula =IF(E13=0,0,("0 "&E11)+0) but that won't work for the remainder of the cells.
View 1 Replies
View Related
Jan 23, 2007
How can I show a decimal as time. For example an item takes 13 minutes to make and I want to make 50, thus using 6.5 hours but really, the 0.5 hours is 30 minutes therefore, I would like to show 6:30 but Excel gets to 23:59 and goes back to 0:00.
View 9 Replies
View Related
Nov 19, 2008
1.25 is in cell A1. This number will often be buried in a longer part number that may look like ELL-1.25-S40.
I would like to use a formula in cell A2 to display the fractional equivalent (1-1/4).
View 9 Replies
View Related
Aug 11, 2009
=("0 "&C3)+0
have this formula for converting fractions to decimals which works great,
the problem i have is to get it to register 0 if there is no fraction in c3
will try and word my next question better
View 9 Replies
View Related
Jul 14, 2006
I have multiple strings in a selection set. My goal is to replace the decimal point with null for a specific requirement. The requirement is this: "#.## "(Meaning: NUmeric.NumericNumericSpace)
Example String #1: 2.5 kips <---no change
Example String #2: 0.6 %%C <---no change
Example String #3: W1.4 <---no change
Example String #4: 0.086 SQ IN <---no change
Example String #5: 6.2.2 <---no change
Example String #6: SPC1.20 <---This one should be changed to: SPC120
Example String #7: 1.2000 <---no change
Now the real complicated string(multiple decimal points found in the same string.)
Example String # 8: 2.5 kips with 0.6 %%C using W1.4 mesh with 0.086 SQ IN. See 6.2.2 on SPC1.20 for series 1.2000. #8 should changed to: 2.5 kips with 0.6 %%C using W1.4 mesh with 0.086 SQ IN. See 6.2.2 on SPC120 for series 1.2000. <---Note:SPC120 change. SPC1.20 is the ony part of the string that meets "#.## "(Meaning: NUmeric.NumericNumericSpace)
View 6 Replies
View Related
Jul 2, 2007
I want to convert the number in a cell, G7, from a whole number into a decimal and then divide that decimal into a whole number in cell E7 and give me the quotient in cell E8.
ie:312 = 6.0
286 = 5.5
260 = 5.0
234 = 4.5
208 = 4.0
182 = 3.5
156 = 3.0
130 = 2.5
104 = 2.0
78 = 1.5
52 = 1.0
Could this also be done with the entire range of numbers from 312 to 52 and giving decimals of 6.0, 5.9, 5.8 etc.
View 5 Replies
View Related
Dec 6, 2007
I received a complaint from one of my colleague that he is facing sudden problem with Ms-Excel(2002)
The problem is When he feeds number 2 in to a cell it automatically converts in to 0.02. I tried using "Decrease decimal" and "format cells" option and even through uninstalling office and reinstalling a different version but the problem still continues.
View 2 Replies
View Related
