Getting Decimals To Appear On Graph?

Jul 17, 2014

I am creating a graph with a wide range of values (0.06 - 300). The smaller values are barely visible on my column graph. I have tried all of the tricks I know. Any way to get the smaller values to show up instead of just hovering towards the bottom of the graph?

View 9 Replies


Convert Degrees Minutes & Decimals Of A Minute (12 34.567') To Degrees And Decimals Of A Degree (12.57611)

Oct 29, 2008

I am trying to convert Degrees Minutes & Decimals of a minute (12 34.567') to Degrees and decimals of a degree (12.57611). I have the formula to convert latitude, that is two digits, but it doesn't want to work with longitudes, three digits. (see attachment). This is the formula that I am using:


View 2 Replies View Related

Make A Scatter Graph That Will Graph The Attached?

Mar 21, 2014

I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.

View 7 Replies View Related

Make A Graph That Will Graph Against Time

Jun 11, 2006

How can i make a graph that will graph against time? lets say i have a bank balance like this:

1/2/2000 $500
1/3/2000 $600
3/12/2000 $400

there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.

View 2 Replies View Related

Line Graph: (line Graph To Display An Amount Over Time)

Dec 30, 2008

I want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.

A short example:
Imagine you own 3 different stores and you're selling oranges. So your table looks like this:

Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):

Date on the x axis,
Oranges sold on the y axis,
and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).

View 2 Replies View Related

Ratio With Decimals?

Oct 14, 2009

I am trying to get an exact ratio in excel but am unable to do so. Example:

60,000/58000 = 1.03. The ratio should then be 1.03:1. But excel is showing this is 1:1. Here is my formula

=TEXT(E55/E56,"0")&":1". I need it to show it to two decimals.

View 2 Replies View Related

Sum Only Positive Decimals

May 23, 2014

I have some problem when I would like to sum only positive decimals on userform, I would like to separate the numbers with comma (",") and sum them, the format should be "0,0" and only numbers and "," can be given in textboxes. How should I do this?

View 3 Replies View Related

Numbers Have Too Many Decimals

Feb 8, 2009

A spreadsheet created by exporting from QuickBooks as a .IIF file is opened in Excel 2003.

A macro multiplies a cell value and returns 1.77999997138977 rather than 1.78. The 1.78 is required for importing back into Quickbooks.

Part of the code is: ...

View 13 Replies View Related

Round Down To Two Decimals

Dec 16, 2009

i am looking for some formula to round off a decimal number

e.g. A1=8.288
if I use the formula ROUND(A1,2) the result is 8.29.

But I am looking for a result 8.288. That means it shoukd not round off rather the after decimal we should have only two numbers.

8.288 should be 8.28
27.4627 should be 27.46

View 6 Replies View Related

Removing Decimals

Feb 4, 2007

i have columns of prices in 2 decimal format that I'd like to manipulate, some prices are whole dollars(no cents & no decimals ) and most are dollars and cents in decimal format-- but to do it successfully, i need the decimal removed. I looked at the "format" function but it doesn't seem to allow for that.

is there any way I can have these prices converted to "cent" format( ie removing the decimal, where applicable), showing them not as "dollars & fractions" but as "cents" i'm sure that would solve the problem for me last time I did it by hand and vowed there had to be an easier way!

View 9 Replies View Related

Warning When More Then Two Decimals Are Used

Mar 30, 2007

I am trying to put together a code so that when a user enteres more then two decimal points in the cell value they should get a warning regardless if they formatted the cell to show 2 decimals or not...

Simply the problem is on the sheet I have a lot of people format the cell to show two decimals but when you copy and paste the cell values to other sheets the decimals are still there which causes problems.

I am intermediete in VBA so if someone can shoot me some example codes I think I can make it work on my sheet.

View 9 Replies View Related

Decimals To Percentages

Jan 4, 2008

I am trying to combine to cells containing percentages, however when I do the percentages turn into decimals. I have tried using the text funtion, but that just returns the full number 1, no decimals or percentages.

View 9 Replies View Related

Rounding Down Decimals

Jul 22, 2008

I'm copying a column range containing numbers with varying decimals from one worksheet to another. The new worksheet and column are set to have no more than two decimals places in the cells through the formatting options.

However, numbers stay showing their original amount of decimal places, so I tried hard-coding the format with:

Sheets("Toolset Scorecard").Columns("G:G").NumberFormat = "0.00"

View 9 Replies View Related

Ignore Decimals In A Formula?

Mar 2, 2014

Let's say I have a set of values (A1:A10) where each contains a number, with a varied amount of decimal places (some may have 0, some may have 10) can I make a formula in cell B1 that averages A1:A10, ignoring the decimal places (rounding to the nearest whole number)

For example, if this was A1:A10


If I did the Average (=AVG(A1:A10)), I would get 94.2498. But I don't want this, I want the formula to take into account the numbers rounded to the nearest whole number, meaning, I want to take the average of..


Which would give me a value of 94.3.. In this example, there isn't much of a difference, but I was simplifying the numbers for time sake

View 1 Replies View Related

Round Off Number With Decimals At The End?

Jun 21, 2014

I want round off number to be with the decimals (usually decimals r discarded for round off feature). I ll be able to explain better with an example.

10.36+10.36= 20.72. If i round it up, it vl be 21.
what i am tryin is to get 21.00 after round off.

I prepare my bills in excel and after total of all products, if i get a decimal number, I would like it be rounded off to whole number with decimal and 00 at the end (eg. 21.00 instead of 21.27 or 22.00 instead of 21.77). I tried to change decimals but when I select 2 decimal places, it gives me the actual fig(eg. 21.27 instead of 21.00)

I am already using =sum for the total so cannot use another formula (as far as i know, 1 cell can have only 1 formula. Dunno if multiple can be used in a single cell).

View 7 Replies View Related

Recognising 1 Or Decimals As Numbers

Dec 10, 2007

I have a weird problem with Excel. It recognises all numbers as numbers but excluding the number 1. It is only recognised as text as well as a decimals, for example 3.4. So every time I try and add these values up it completely ignores 1 and decimals.

Have I modified a setting?

View 10 Replies View Related

Fixied Decimals With CONCATENATE

Jun 11, 2009

I'm converting metric to British values and have no problem with fixing the decimals when displaying the number. However, I'm wanting to CONCATENATE the unit of measure to the conversion and end up with 12 places beyond the decimal.
Entered formula is: =CONCATENATE(CONVERT(T5,"cm","in")," in")
Results in 159.055118110236 in

But = CONVERT(T5,"cm","in")
Results in 159.1 which is what I want.

View 2 Replies View Related

Delete Rows With Decimals?

Dec 17, 2012

I have created a worksheet to figure out (in this case) how many sets of Buckyballs i need in order to get both a square number and a cube number. There are 216 balls per set. My worksheet so far has:

Sets Number of balls Square Cube
(Number of sets) (Sets*216) (Number of balls ^0.5) (Number of balls ^(1/3))

The problem is that I am looking for the number of sets required to produce an integer in both Square and Cube columns. I have figured out that I can circle all values that are not integers. I am looking for a way to delete all rows with a decimal value or at least all cells with a decimal value and I can delete the rows from there.

View 1 Replies View Related

Turning Decimals Into Millions

Feb 13, 2014

I'm going through financial statements and I would like to be able to run full blown analysis on them. Most public financial reports are written so that a lot of zero's do not take up the useful space. As such (and there is a ton of this solution out there I've found), many people want to take $1,500,000,000 and turn it into 1.5M

I however, do not. I want to convert it backwards. So when something says 5.19 I would like to format it in such a way that it will read (and I can run calculations against it) as 5,190,000,000 (there are no alpha characters, there are instances where there will be negative numbers). Then I could copy this to the 17 different financial statements I've already got rock'n rolling in Excel right now.

View 4 Replies View Related

Sorting With Multiple Decimals

Jun 11, 2009

I'm looking for a way to sort things with multiple decimals (version number). Is there a way to have something like this:



I could do it all manually, but I have to work with like 400 entries at a time.

View 4 Replies View Related

Macros Won't Work With Decimals

May 8, 2009

I've been trying to create an excel macro to calculate shortest route path using floyd algorithm..

Problem is, i can't figure out why this macro won't work with decimal numbers..
I'm pretty sure there's a VERY simple explanation for this..
Probably has something to do with excel's formating

See the attachment and press Run button, it won't produce the correct result, but if if you multiply all the numbers in "input" sheet by 100.

View 14 Replies View Related

Range.Value = A() Chopping Off Decimals

Jun 30, 2009

When I use this: ....

View 7 Replies View Related

Converting Decimals To Fraction...

Sep 25, 2009

Can anyone help me with a code for converting decimal number to a nearest 1/16 th fraction. For example converting number 2.1875 to 2 3/16 and so on...Also if it is 2.5 it should display 2 1/2...

View 14 Replies View Related

Format: Using Numerals And Decimals

Jul 10, 2009

When I set my cell for Numbers it wants a decimal place. If I set it to 2 decimals then 100.1 (One hundred point one) would look like 100.10 (and print 100.10). If I use 100.10 (One hundred point ten) it looks and prints 100.10. If I set the decimal to one then the problem is reveresed.

Setting to General looks like 100.10 (One hundred point ten) but when using VBa to match numbers it is matched to 100.1 not 100.10.

Now I have it set to Text, but I see when I replace (find & replace) values like find 100 replace 99 the 100.10 becomes 99.1.

Incedently I have a macro that compares (and copies cell values) numbers from one sheet to another and occasionally it skips a number, always a decimal value like 100.10 or 100.1. Or any thing x.10, x.1, x.3, x.19 any combination of x.x or x.xx.

Is there a way to format so decimal numbers are decimal numbers and trailing zeros arent omitted? If the value is one decimal I want one decimal, if its two decimals I want two decimals.

View 5 Replies View Related

Round Time To Decimals?

Nov 9, 2013

I am trying to round up the total sum of time to the quarter hour. I enter time in fields as follows:

Column B: Time I begin working
Column C: Time I end working
Column D: Total time C minus B
Cell format for columns B and C: H:MM AM/PM
Cell format for calculated field in column D: H:MM
Calculation, column D to show total time on a daily basis: =IF(C6>0,C6-B6,"")

However, I want to calculate total time per month in decimals, rounded up to the nearest quarter hour.


I worked 5 minutes (I do not want to reflect 15 minutes for five minutes of work). When I total time for the entire month (total daily time in column D), I would like that total to reflect total Hours:Minutes rounded up the quarter hour - but in decimals!

Assuming this is possible, how should I format cells, and what would the formula be for the total of hours per month?

View 5 Replies View Related

Fractions To Decimals With And Without Hyphens

Feb 12, 2014

I have fractions and whole numbers in a column as per the following.

E13 = 3/4
E15 = 5
E17 = 1-1/2

I can use the formula =SUBSTITUTE(E17,"-"," ")+0 which gives the correct result of 2.5 and also correct
for E15 with the answer 5.

But I'm stumped how to get it correct for E13 where it is less than whole number.

I can use the formula =IF(E13=0,0,("0 "&E11)+0) but that won't work for the remainder of the cells.

View 1 Replies View Related

Converting Decimals To Hrs & Minutes

Jan 23, 2007

How can I show a decimal as time. For example an item takes 13 minutes to make and I want to make 50, thus using 6.5 hours but really, the 0.5 hours is 30 minutes therefore, I would like to show 6:30 but Excel gets to 23:59 and goes back to 0:00.

View 9 Replies View Related

How Can I Convert Decimals To Fractions?

Nov 19, 2008

1.25 is in cell A1. This number will often be buried in a longer part number that may look like ELL-1.25-S40.

I would like to use a formula in cell A2 to display the fractional equivalent (1-1/4).

View 9 Replies View Related

Converting Fractions To Decimals

Aug 11, 2009

=("0 "&C3)+0

have this formula for converting fractions to decimals which works great,

the problem i have is to get it to register 0 if there is no fraction in c3

will try and word my next question better

View 9 Replies View Related

Replace Decimals By Criteria

Jul 14, 2006

I have multiple strings in a selection set. My goal is to replace the decimal point with null for a specific requirement. The requirement is this: "#.## "(Meaning: NUmeric.NumericNumericSpace)

Example String #1: 2.5 kips <---no change
Example String #2: 0.6 %%C <---no change
Example String #3: W1.4 <---no change
Example String #4: 0.086 SQ IN <---no change
Example String #5: 6.2.2 <---no change
Example String #6: SPC1.20 <---This one should be changed to: SPC120
Example String #7: 1.2000 <---no change

Now the real complicated string(multiple decimal points found in the same string.)
Example String # 8: 2.5 kips with 0.6 %%C using W1.4 mesh with 0.086 SQ IN. See 6.2.2 on SPC1.20 for series 1.2000. #8 should changed to: 2.5 kips with 0.6 %%C using W1.4 mesh with 0.086 SQ IN. See 6.2.2 on SPC120 for series 1.2000. <---Note:SPC120 change. SPC1.20 is the ony part of the string that meets "#.## "(Meaning: NUmeric.NumericNumericSpace)

View 6 Replies View Related

Copyrights 2005-15, All rights reserved