Formula To Display Column Header As Result When Any Value Exists In Cells Under Column
Jul 25, 2014
I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
View 7 Replies
ADVERTISEMENT
Jul 22, 2014
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))
View 2 Replies
View Related
Sep 18, 2012
I need a formula to return column header if there is data in the column, any data.But I also need to return the second, third, fourth header with data too
In column A row 2, I have =IF(M8"",$M$1,IF(N8"",$N$1,IF(O8"",$O$1,IF(P8"",$P$1,IF(Q8"",$Q$1,IF(R8"",$R$1,IF(S8"",$S$1,IF(T8"",$T$1,""))))))))
This returns the row 1 header for the first instance of data in row 2 columns M thru T But in B2, I need the second header with data in the column.
I need the results in yellow (1st, 2nd, 3rd, 4th) from the array to it's left
1St match2nd 3rd 4thColumn MColumn NColumn OColumn PColumn QColumn R
Column MColumn PColumn QData data2Data3
Column NColumn OColumn PColumn R Data Data2 data3 data4
Would use match/index but can't increment it to the second or 3rd match
View 2 Replies
View Related
Jan 15, 2010
I want to sum a column and then display the result but in the same cell put some text:-.....
View 4 Replies
View Related
May 30, 2013
I have a pivot table and perhaps that isnt the best way to do this. (Sample attached). Ultimately I need to display two columns only:
Application (ColA) Business (ColC)
There are three columns of data.
Applications (ColA) Usage(ColB) Business (ColC)
There are multiple instances of the same application in ColA, ColB has usage =true or blank and ColC has multiple instances of the same business.
Based on the count of Application in ColA, and the count of Usage =True, I need to return the Business with the MAX count.
Note: the usage cannot be a filter, it must be a count.
View 1 Replies
View Related
Jun 8, 2006
i need a formula that tells me if a value exists in a column. for example if there is a value in a cell in the b column of 23 no matter where it is, i want cell c25 to return the word "yes".
View 2 Replies
View Related
Apr 25, 2014
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
View 5 Replies
View Related
Jul 7, 2014
I am looking at formula to return the column header, see example attached.
View 2 Replies
View Related
Feb 27, 2013
I have a table, lets say from C4:J15. Basically all the column headers are dates(row 4). I want to input a formula into column D(D5:D15) that basically retrieves the column header of the first instance in which that row has data in a cell. So say Row8 has the word 'Medicare' in C8, and there is a dollar amount in cell H8, in cell D8 I would like to retrieve the column header of 2/3/2013 that is in cell H4(the header). If there is a dollar amount in the row, that means there is a variance, and I'd like to know the first date in which there is a variance so I don't have to search the whole row.
View 2 Replies
View Related
Oct 23, 2008
The basic spreadsheet consists of a list of names down the left hand side with 19 columns across - one for each art activity (I have pasted a copy of it below - but it doesn't paste so good!). Each person has selected their three activities and this has been recorded by placing a 1, 2 or 3 in the relative columns. Each person has been told that they will get a place on two out of three of their chosen activities (in which case we will change one of their choices to a 0).
What I would now like to be able to do is to create a mail merge in Word which looks at each person and then goes along that row to find out which columns have a 1, 2, or 3 in it. The heading for that column would then be used as a merge field so that I end up with a word document which looks something like this:
{Woodwork Stars} and {Cooking Sweets}
NameClassGlass
Painting
Candle
Centre Piece
Large
Nativity Figures
Beaded
Decorations
Advent
Calendars
CrackerPaint
Bowl/Plate
Xmas
chimes
Woodwork
Stars
Cross
Stitch
Sewing
Decorations
Recycled
Wreaths
Pompom
Robins
Clay
Xmas Tiles
Decoupage
Bowl
Cooking
Cake
Cooking
Sweets
Salt
Dough
Wrapping
Paper/Cards
Smith, Fred213John, Elton213Turner, Tina123
View 9 Replies
View Related
Feb 24, 2009
I have to use several dozen pivot tables a day. I already use a couple of macros to do a lot of the tedious formatting, but if I could automate this it would save me a lot more time. I have been trying to both write a code and modify code written by the recorder but have not even come close to anything that works. What I want is to have a macro that searches through the column header for predefined names and if it comes across one of these names it will insert a specific formula, based on its name, in the first cell below the header. Then it will autofill to the last row and move on to searching for the next predefined header name. If that name is not found, it will move to the next predefined header name. One major problem is that the formula to insert under any specific header name is based on other columns in the table that aren't always in the same range. So, not only do I need it to search for columns to place a formula in, that formula has to search for the appropriate column to find the correct value to use in the calculation.
For example, one predefined column name would be Avg Price. The formula for that column would be (Sales/Qty Sold), but these 2 columns could be located anwhere in the table. How can I get it, once it has found a column that needs a formula, to locate the correct column/cell to get the correct value from the sales and Qty Sold columns?
View 9 Replies
View Related
Mar 13, 2014
I have a data set with the weeks of the year as my column headers and a value of 1 (from a pivot table) in a distinct row value (removed for privacy) showing whether it existed in a given week based on pre defined criteria. What i need to do is ID the first (from the left) non blank cell in each row and then return that cells column header. I then need to do the same for the last (from the left) non blank cell in each row and then return that cells column header. On the attached I've put values in column N and O to show an example of what I need to return using a formula.
View 7 Replies
View Related
Jul 9, 2013
I'm trying to copy cells from a column in one workbook to cells in a column in another workbook based on what's in a header column.
Such as
Original workbook
Mat Qty
A 1
C 3
D 2
E 4
G 5
Total 15
Target workbook becomes
Mat Qty -> Mat Qty
A -> A 1
B -> B
C -> C 3
D -> D 2
E -> E 4
F -> F
G -> G 5
My code so far (which might not be worth reading) is:
Code:
Sub CopyColumnToWorkbook()
Dim sourceColumn As Range, targetColumn As Range, sourceColumnValue As Range, targetColumnValue As Range
Dim mySourceCell As Range, myTargetCell As Range
[code].....
I'm getting a runtime error ('1004'. Application-defined or object-defined error) on the Copy statement within the If sttement.
View 3 Replies
View Related
Feb 20, 2014
I need a code to do the following:
1. Search in row 1 until it finds the header text "Balance"
2. Check every cell in that column until the last used row of the spreadsheet is reached.
For every cell.
View 3 Replies
View Related
Feb 7, 2014
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
View 3 Replies
View Related
Mar 3, 2014
[Code] ......
This works, UNLESS "My Column Header" is the last column, or second to last column, then it jumps left two columns, instead of landing on the correct column.
The purpose of this script is to select a cell directly in that column that I was searching for.
View 2 Replies
View Related
Sep 10, 2012
I need a formula that will look at cell A1 and compare it against column B, if it finds it, show that value, if not, show "not found".
View 6 Replies
View Related
Feb 25, 2014
I have set of column data A & B In those A contains Serial No & B contains Ticket No...
I am looking for formula to solve the function by those conditions... almost get done by countifs functions.
1.If Serial & Ticket No Only Once result should be "FIRST TIME LABOUR ONLY"
2.If Repeat Twice For The First Serial No And Ticket "Labour Only", For The Second Serial No And Ticket "Labour & Parts"
3.If Serial No Twice But Ticekt No is different for both serial no Result Should be "PART USED 1 OF 2"
4.More Than 2 Times Serial & Ticket No Repeats" Result Should Be "CCI"
View 5 Replies
View Related
Feb 15, 2007
I need a formula to count cells based on the date, so that I can have a blank cell when the answer is 0. I am adding values cumulative and future cells need to be blank because I have a graph that has a trend line and I don't want the trend line to fall off at the end. I also don't want to have to go back to this every month and update it.
Column A
Date
1/2/2007 0:00
1/3/2007 0:00
1/10/2007 0:00
2/10/2007 0:00
2/10/2007 0:00
2/15/2007 0:00
3/22/2007 0:00
3/22/2007 0:00
3/22/2007 0:00
4/31/2007 0:00
4/31/2007 0:00
4/31/2007 0:00
Column B
Invoice #
CM-0003881
CM-0003882
CM-0003883
CM-0003888
CM-0003928
CM-0003932
CM-0003933
CM-0003985
CM-0004007
CM-0004008
CM-0004009
CM-0004065
I have this formula in cell F3 that will add the dates through the end of January:
=SUMPRODUCT((A1:A1000>=DATEVALUE("1/1/2007"))*(A1:A1000
View 10 Replies
View Related
Aug 5, 2008
I have an Excel workbook with multiple sheets. In one sheet, there are many columns that automatically get hidden based on cells values (=1) in another sheet as I type. I use this
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$C$7" And Target.Value = 1 Then
Sheets("Stakes").Range("E:E").EntireColumn.Hidden = True
Else
If Target.Address = "$C$7" And Target.Value <> 1 Then
Sheets("Stakes").Range("E:E").EntireColumn.Hidden = False
End If
End If
End Sub
Recently I had to change the second sheet that instead of manually entered values, formula results appear in cells. And the above code doesn't work anymore, columns are always stay unhidden. How can I achieve what I want? I need columns get hidden if formula results =1.
View 4 Replies
View Related
Feb 9, 2009
I'm looking for a formula that will return the column header (a date) of the first instance of a number greater than 0. For example if columns A through S had dates as in row 1 (header row), and in row 2, every column contained a 0 up until column P, I would want the date (Row 1, Column P) returned? I think this might be a sort of index/match formula, but I am not very familiar with these.
View 3 Replies
View Related
Apr 29, 2009
I have a spreadsheet with several columns (all column names are in row 1).
I have 2 of column names. Note that their actual column# might change so the macro would have to look for the column name and NOT the column position ...
View 11 Replies
View Related
Feb 20, 2014
We receive payments in either USD or HNL. I want to be able to have a final price (last column) that puts all prices in USD. I have a reference cell on a separate worksheet (drop down inputs) that we will use to store the data for validations and the conversion rate. We use one conversion rate for all transactions for a fiscal year, so only need to update once a year. Not sure how to make this work.
View 2 Replies
View Related
Dec 14, 2013
I am trying to make a column show the result of a formula as positive number only. Right now the column subtracts two other cells and displays the result. I am trying to make it show all the results, positive or negative as positive.
View 3 Replies
View Related
Apr 14, 2013
I have an excel file with some data in it. I have two columns with one of four words in it. For simplicity I'll call them RED, GREEN, BLUE, and Yellow. A few columns over I have columns "Same" "Good" and "Bad". I'm trying to figure out a way to get excel to put a 1 in the appropriate column, if cell A1 is Red I need excel to look at the word in cell B2 and put a 1 in the "same" column if A1 and B1 are the same word. If the word in B2 is Yellow I need excel to put a 1 in the "Good" column. If the word in B1 is GREEN or BLUE I need it to put a 1 in the bad column. The tricky part is each of the four words RED, GREEN, BLUE, and Yellow have a different set of words that will be called "good" or "bad". So if the word in cell A1 if Green for example it will have a different set of good and bad color words.
So it seems I need four different functions depending on what word is in A1. In the column next to these lists of words I have the date which I'll need to use to give me the sums of same, good, and bad for each day. But first things first. I think I need to use a combination of IF functions and MATCH function, but I can't figure out anything that works. Below is what I'm hoping it will look like when I've got the right formulas.
First column
Second column
Date
Same
Good
Bad
[Code]....
View 9 Replies
View Related
May 15, 2014
I have a column that contains Gender values ( M or F). How do I create a formula that first counts the number of M or F then tells me the ratio of M to F?
View 6 Replies
View Related
Aug 28, 2009
I have values in COlumn A, probably about 50K rows, The total unique values on the column A is only about 27. I need to capture all those unique values and paste them in column B. I didn't want to do "Advance filtering" since the workbook has many macros's on it that the user simply click on. Im thingking of creating a loop and compare values already pasted in Column b but then that will take too much time to complete the loop. Is there any easier or yet more efficient way to accomplish this?.
View 2 Replies
View Related
Nov 18, 2011
I've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
View 4 Replies
View Related
Sep 26, 2007
I have a formula in A1 that I would like to execute from A2. I want the A1 to display the formula (so no "="), but I would like cell A2 to execute the formula in A1.
If A1 contains: "SUM(1+2)", how can I get A2 to display "3" without reproducing the formula?
A1: SUM(1+2)
A2: ????
I suppose I'm looking for something like this:
A2: ==A1
But, of course, that doesn't work.
If I do this it gets close:
A2: ="="&A1
But that returns "=SUM(1+2)" instead of executing the formula.
View 9 Replies
View Related
Jan 24, 2013
I have software (SAS Add-In for Microsoft Office) that loads external data into Excel. The data has a title, header, and rows/columns. It automatically creates a named range such as Table1. The named range does NOT include the headers.
Here is an example:
Code:
SASApp:SASHELP.CLASS
Name
Sex
[Code]....
As above, can I dynamically derive the column number based on the header row of the named range, where such named range refers to a table?
On a related topic, can I derive the column name given the column number? For example, in pseudocode:
Code:
For currCol = firstCol To (firstCol + lastCol - 1)
' Assume a function called ColumnName
Debug.Print ColumnName(currCol)
Next
View 1 Replies
View Related
