Div/o Error Message Not Allowing To Calculate The Other Sheet
Jan 18, 2009
When you have 0 divided by 0 if there a way to show 0 instead of the div/o error message. The reason I want to know if that I have a spreadsheet for peoples efficiency during the week which feeds into another sheet to provide a monthly/yearly totals and who is the best and worst, but if there on holiday for a week or two the feed does not work as the error message does not allow the other sheet to calculate.
View 7 Replies
ADVERTISEMENT
Feb 9, 2009
If I have the start date (say February 01, 2009) and the job will take 100 working days, when will it finish if there is no work done over weekends? I assume you can use networkdays somehow but the final logic escapes me
View 2 Replies
View Related
Jun 6, 2009
I have a worksheet called "PurchaseOrders" and a worksheet called "Orders."
In the "Orders" Worksheet I have a command button. When this button is clicked it writes to cells in the "PurchaseOrders" Worksheet. The cell range it writes to is N21:N1000. It basically writes an invoice number which exists in cell B6 of the "Orders" Worksheet with each number listed in order.
After it has written, when I return to the "Orders" Worksheet, if the button is clicked again but the PurchaseOrders" Worksheet N21:1000 contains an invoice, the same as "Orders" Worksheet B6 (a duplicate), I would like an error message to be returned stating "Please Create a new invoice." I already have a sub where error messages are recorded for void fields and unregistered customers.
How would I write an if statement in this sub to say:
IF Cell range in "PurchaseOrders" Worksheet (N21:N1000) does not equal the code in "Orders Worksheet (B6) please process code as normal. Else if it does please display an error message and do not proceed with processing any code? For some reason I'm having trouble naming the cell range.
View 3 Replies
View Related
May 4, 2009
i want to do the following: initialize a sheet by showing form1, which accepts user input for rows and cols name a range on the sheet of size rows x cols display form2 which is just a "DONE" button that they click when they're finished pause/stop the macros and allow the user to fill in values for that range start up some other macros when they press the "DONE" button.
i tried it and found that when you display a form it locks the sheet (can't select the sheet to input values) and you can't even alt tab away from the form. is there a way around this?
View 2 Replies
View Related
May 5, 2014
I have the following macro so that we can use the outline feature without having to unprotect a sheet.
Private Sub Workbook_Open()
With Worksheets("Schedule")
.Protect Password:="APQP", Userinterfaceonly:=True[code]....
However once the macro is run, filtering will not work without unprotecting the sheet first. If you choose not to run the macro, filtering will work without unprotecting the sheet however the outline feature will not. what I need to add and where to make both the outline and filter features to work without having to unptotect the sheet?
View 1 Replies
View Related
Nov 16, 2009
I want my macro to protect my sheet again after it is done to allow editing objects and formatting rows. I am really stuck and have come up with the below, but it isn't working.
View 5 Replies
View Related
May 20, 2009
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies
View Related
Apr 28, 2006
Excel is very slow for me, and I have just noticed that there is a 'Calculate' message in the lower bar of the window.
View 9 Replies
View Related
Aug 17, 2008
For some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
View 9 Replies
View Related
Nov 2, 2007
I do hit the SCE (Shift-CTRL-Enter) keys. The formula does work in one workbook, but not the other. The only difference between the two workbooks is this formula has a larger range.
New Formula- doesn't work (ERROR- #DIV/0!)
{=AVERAGE(IF(Sheet1!A3:A1094="MONDAY",Sheet1!E3:E1094))}
Old Formula- works
{=AVERAGE(IF(B6:B451="MONDAY",E6:E451))}
View 9 Replies
View Related
Jul 16, 2008
When I input the formula : =(G9+G16+G23+G30+G37+G44+G51+G58+G65+G72+G79+G86+G93+G100+G107+G114+G121)/17
I get the error message #VALUE!
View 9 Replies
View Related
Jan 11, 2009
I have one line of code that I need an error message for:
View 2 Replies
View Related
Feb 3, 2014
I get spreadsheets sent to me with hours and minutes in decimal format. Frequently a quarter of an hour or three quarters of an hour are posted as 0.15 or 0.45 instead of 0.25 and 0.75. Other odd fractions can also appear.
I want an error message if the value when divisible by 0.25 is not a whole number.
View 6 Replies
View Related
Dec 15, 2006
I am trying to run the macro and I get this error:
Compile Error! Sub or Function not defined
for the following
RFQnum = VLookup("RFQ Number", CPARSdata, 2, False) 'RFQ# should be same for each supplier
CPARSdata is a named ranged with 25 columns and 338 rows
View 9 Replies
View Related
Dec 28, 2006
I would like to get some information when a vba code is in error.
Can we create a sub that we can refer to when a vba code is in error. Something as:
On Error goto "name of the sub"
In that sub, I would like to write in sheet1 , cell a1 the name of the sub in which the code is in error.
In cell a2, i would like to write the line in error in the VBA code.
finaly i would like to show a msgbox ("Contact your admin")
and then close the file
View 9 Replies
View Related
Jul 17, 2007
I am getting the error message
"Compile Error: End If without block If" for the code below :
ErrorHandlerRoutine:
If MyInteger = 1 Then
MsgBox "Data does not exist in the CO2 data set"
End If
Resume 1
If MyInteger = 2 Then
MsgBox "Data does not exist in the Water data set"
End If
Resume 2
If MyInteger = 3 Then GoTo 3
MsgBox "Data does not exist in the Waste data set"
End If
Resume 3
View 9 Replies
View Related
Jul 29, 2008
I need an error message to pop up if 3 cells contain the same data
The range of these cells would be G19 to G49
Ideally the error message would say "Rules Broken"
Also if possible could the same message be shown if the value of cell J52 exceeds 50,000000
View 9 Replies
View Related
Jun 11, 2009
I wanted to make a pop up alert message appear whenever the formula in a cell gives a particular output.
Before posting this i tried looking for similar posts before, but the ones found do not solve my problem. There it asks me to write the following code in VBA,
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As String
MyRange = "A1"
If Me.Range(MyRange).Value = "Have Meeting" Then
MsgBox "Have Meeting"
End If
End Sub
But my doing so, I can not use any formula in the cell A1 or any other cell i give reference as MyRange. I will always have to physically type "Have Meeting" or any other word assigned in the above.
View 9 Replies
View Related
Aug 24, 2009
I am writing some code to do a comparison between two cells X2 or AB2 with an X which checks to:
1. make sure one of the two are filled, or
2. both are not filled.
Below is an extract of the spreadsheet I am working on. I need to check to make sure one of the boxes is checked. If both are empty or both filled with an ("X"), I want a message box to tell me to correct the error and stop the macro from continuing. If only one is marked with an ("X"), I want the macro to continue but don't know how.
RSTUVWXYZAAAB
2IN PROGRESS: COMPLETED:
View 9 Replies
View Related
Dec 28, 2009
Using Excel 2003
I am receiving an #Value! error message from my sumproduct formula:
=SUMPRODUCT((Data!$A$2:$A$47=G$2)*(Data!$B$2:$B$47=G$4)*(Data!$A$1:$N$1=$B21)*(Data!$A$2:$N$47))
As follows:
Data!$A$2:$A$47 is a date
G$2 is a date within the context
Data!$B$2:$B$47 is a unit number
G$4 is a unit number within the context
Data!$A$1:$N$1 are descriptive titles
$B21 is a decriptive string within the same context (copy paste)
Data!$A$2:$N$47 are to be summed is all criteria are met.
View 9 Replies
View Related
Jun 7, 2006
I have a vba code that I wrote out to search for a file and update data on a spreadsheet with the new file... however I've come to a point where I'm not sure of what code to use. If I search for a file that is not there I get a runtime error and of course it ask me to end or debug. What I would like for it to do instead is search for the file and if it is not there... display a message box stating that the file searched for is not found and automatically closes the workbook after OK is pressed.
Here is the code for those who may need it....
View 7 Replies
View Related
Jun 10, 2006
I've got the below code which I use to log users who opens my spreadsheet. It's a Event so runs when the spreadsheet is open with macro enabled. The spreadsheet is on a shared drive which has the prefix "K". Most users it works find but one user gets a error Message "Path or Drive" error. I got around it by adding "on error" but how do you overcome issues with drive prefixs and the drive address e.g "K" vs "\CRD2000"
Private Sub Workbook_Open()
Open ThisWorkbook.Path & "usage.log" For Append As #1
Print #1, Application.UserName, Now
Close #1
End Sub
View 4 Replies
View Related
Jun 21, 2006
I have developed a program in which the user will only see the userforms (and to an certain extent not even be aware of excel doing most of the work).
i am looking for code that will intercept an error message should something go wrong in my vb code. Currently when an error occurs, it pops back to VB and gives the error message. I want it to rather give a popoup message asking the user to contact me.
View 3 Replies
View Related
Mar 21, 2007
i'm coping a file over itself and i get an information message "File cannot be copied onto itself" - An attempt to copy a file could not be completed because the file already exists or same source and destination.
i would like to surpress this, i have tried the following, but to no avail:
Application.DisplayAlerts = False
Application. ScreenUpdating = False
Application.Interactive = False
?
View 3 Replies
View Related
Aug 13, 2014
I have created a report with 22 sheets as different pages to be included or hidden depending upon the type of report needed. I had found several sources saying to use the Custom Views function. So for example I will unhide all the sheets and add as a Custom View "All Sheets" and then whittle it down to the 5 I might need for B type inspections and add that view as B Inspection. But when I try and toggle between them I'm getting an error message that says "Some view settings could not be applied" - and thew saved view I was looking for is not the same sheetwise.
View 1 Replies
View Related
Mar 2, 2014
This formula might be the problem for the error message.
SUMPRODUCT((MOD(COLUMN(C3:CO3)-COLUMN(OFFSET(C3:CO3,,,1,1)),3)=0)*C3:CO3)
I have other cells with the same formula (but with different range i.e. D3:CP3), yet it doesn't have circular reference error message.
View 2 Replies
View Related
Mar 26, 2014
I'm trying to create a situation where the user would get an error message when they tried to enter numbers in two specific columns in the same row. That is, in row C they can only enter a number ( 1 or 2) into C5, C6 or C7. If they enter a number into two of these cells, I want an error to appear. They would have to stop and correct the error.
I've tried two scenarios with no luck:
1. I've data validation where I did SUM(C5:C7) and hid the answer in C8. I then tried to get a data validation to display an error code when C8 exceed 2. This didn't work.
View 3 Replies
View Related
Mar 2, 2009
I may be misunderstanding the point of error.type() command. I'm wanting an error message to appear once a cell goes below 0. So far, I've only managed to have the error message appear all the time, or never.
View 4 Replies
View Related
Aug 18, 2009
I need to write a formula but excel shows an error message "Formula Too Long." There are two long strings of the formula that I repeat several times. Is there any way to put these strings in other cells and reference them within the formula? Each of the strings looks very similar to this:
View 9 Replies
View Related
Mar 2, 2014
I'm running this line (from longer code of course), where i/g are integers and h is a range:
[Code] ......
And I'm getting run time error '1004'.
View 9 Replies
View Related
