i have a list of about 20,000 phone numbers that I need to edit.
all start
01 123456
01 123457
01 123458 etc
I am trying to create a macro that will change them to
+001123456
+001123457
+001123458 Etc
However, no matter what I try it always comes out as
+001123456
+001123456
+001123456
F2 Copy and paste is going to take me forever, and I am sure that there must be a quicker way to do this.
this is my first time creating macros so am completly lost.
I want to keep the text that is in the cell that I am editing, just add the country code and delete the space.
I have been using this code and just noticed that it resets all of my options buttons to false when I exit and then re-enter (activate) the sheet with the option buttons.
I see where this is going on, but don't know how to correct it. I only want the option buttons changed to false if
The Sol named range is something other than "Primary Vendor". It seems to call the macro ClearOB whenener the sheet is activated.
Private Sub Worksheet_Activate() If Range("Sol").Value = "Primary Vendor" Then For Each OB In ActiveSheet.OptionButtons OB.Enabled = True Next OB ClearOB ActiveSheet.ScrollArea = "A1:K58"
I need the values that are copied from the template to copy over in text form from the "Data" Tab. Secondly, the master sheet has multiple lines for each vendor. For the area highlighted in red I'd like for it to copy all cells in column C for the vendor and search the vendor by name. Then, move to the next sheet.
1.I need to protect certain locked cells from editing and allow certain unlocked cells to be changed on multiple worksheets.
2.When all of the changes are made to the unlocked cells, I need to password protect the entire workbook (except one worksheet) from any changes. (i.e. Prevent even the unlocked cells from being edited)
3.I also need a password to un-protect the workbook and return it to the state described in # 1. above .
I am attempting to print each letter of a string in a specified cell individually in different cells. For example, if I input the word "Hello" in cell B1, it would automatically print "H" in A1, "e" in A2, "l" in A3, etc.
I currently have this;
VB:
Private Sub Worksheet_Change(ByVal Target As Range) Dim Count As Integer Dim Explosion As Integer Dim Kaboom Dim EndCounter As Integer Dim StrTarg Dim PLV
[Code]...
However, it does not seem to loop. It simply prints the first letter of the string inputed (In cell K3 in my case), into cell A1, and then stops. Surely it should continue to loop around untill Count is equal to the length of the string in K2.
I want to add (same) text to the end of a whole bunch of cells. What would be the formula or function in Excel 2007 for this? I want to add ":59" to the end of each of these:
I am creating a large vlookup. I have multiple instances of a name, twenty to be exact. I copy the first cell it is name1 and then I paste it for the next 19 cells below. Is there a quick way that I could have it go name2 name3 name4 etc all the way to 20? Currently I am just having to click and change the value manually.
I would like to select all cells in column A that begin with the text "SP". Some cells will be contiguous but others will not. For instance in one case, I would like the macro to select cells with the text "SP" which would result in cells A1, A2, A3, A10, A15 being selected. I am working on building a macro that will then do other things to these cells/rows so this is the first step.
The below code will select the first cell with "SP". How would I alter this code to only search Column A and select multiple cells? or totally different code.
Code: Sub test() Dim r As RangeSet r = Cells.Find(what:="SP", LookIn:=xlValues, lookat:=xlWhole) If Not r Is Nothing Then r.Select End Sub
I have 150 or so workbooks. Each of them are in the same format. I need to edit this format. Bolding, Borders ect. I know you can do this with multiple worksheets but how can do do with with multiple workbooks?
Is there a way to SET a RANGE that can be used for further editing without the need to specify the range each time for each function to be perfomed? I have a pile of Data, with a Calendar date and 4 columns of data for each date.
I want to make a summary for each year separately of one column of data (Total PL). How can I set a condtion that it will output a summary of data for a given year, e.g. 1990?
Even more useful might be setting up a table for each year, where I will be able to perform easy function like SUM, MAX, MIN but it will use data only from the specific Year in each row. - Is there a way to make it simpler, but not having to specify the RANGE for each Year for each Function?
Running excel 2002, windows vista (some machines on network are running xp). I have a spreadsheet that I want to be able to edit from all computers on the network so that it shows real time changes on all PC's.
It would be like using google docs, I can't use google docs because my file size is 2.5MB and it is too much for it.
I'm trying to convert some data which excel is reading as text into numbers for example I have:
[Code] ......
All the numbers I've imported from an app analytics company into excel which are greater than 1.0 appear as numbers (to the right side of the cell) and all the numbers less than 1.0 appear as text (to the left side of the cell). I want all the numbers appearing as text to appear as numbers so I can multiply them with other cells.
I've clicked format cells - number but this has no effect. I click format cells -protection - unlocked but this has no effect.
I have thousands of rows with all numbers less than 1.0 as text instead of numbers. What's the easiest way to mass convert them all to numbers seeing as the above options haven't worked.
I don't want to have to click through thousands of rows to edit it manually...
I have inherited multiple spreadsheets with thousands of hyperlinks in a single column, from all of which I need to extract the hyperlink text to audit it and edit it. The hyperlinks are only displaying less than useful words such as "Go To" "View" or "Click Here", for example.
Manually, I can right-click on the cell, select Edit Hyperlink, press Ctrl+End to select the entire link, press Ctrl+C to copy it, click on OK to close the editing dialogue, then paste it in the destination cell. That's easy, and good if you only have a few to do, but very tiresome if you have more than a dozen. Life's too short to do all those I need to do manually with a 29 day deadline!
I tried setting up a Macro to do it for me, but couldn't get it to work down a column and paste the result in the destination cell on the same row as each successive cell was located. I do very little Macro work, and I find Excel to be less than intuitive in this respect, so I gave up. (At least in Word you can see the whole step-by-step process in the Macro Editing window and easily fix it, if need be...).
One previous discussion, dating from 2006, supplied two answers. See [URL]
Should I set up a Macro and insert the above Function into it? Or is there a completely different way to do it? how to do this in Excel 2003/WinXP is very welcome.
I have a text file, which has a column of wrong data. I can change it manually by loading it into Excel but it is semi-colon delimited and I can't export to such a file.
I therefore, would like to write a VBA tool, which reads the file and edits the the value between the 5th and 6th semi-colon and will continue do this for each row (the new value is constant across the rows).
I have some VBA code in an Access DB that opens an Excel spreadsheet at a specific workbook, and then performs some formatting on the sheet, before saving the changes and closing the workbook.
The first time i run the sub it works perfectly. If i then try and run it again i get a run-time error 91 message (Object variable or With Block variable not set). This happens every subsequent time i try and run the code until i manually reset.
The error message is always at the same point. Here's the I've put ***ERROR MESSAGE HERE*** at the point in the code the error seems to be occuring
I've got ALOT of parentheses, 5 nested IFs, 5 ANDs, 4 ORs. The ANDs and ORs are within the IFs.
While editing the formula, I can, at times, achieve the condition where the cell references become color-coded. Or at least some of them do. But, when I get to this point, I'm usually at a spot where I can see the formula isn't right.
I'm confused. What does it mean when my text is all red when I go to edit a formula? Did I hit some limit? Again, I don't get error messages and the formula seems to work properly.
I am trying to Lookup a country to see if it is classified as a "Developed Country".
My formula would be in cell AA4. I want to see if the country in cell B4 is on a list of developed country's on another worksheet. IF the country is found on that list cell AA4 displays Developed. If the country is not on the list, cell AA4 displays Emerging.
I have tried an IF statement using the Match function and it does not work.
=IF(MATCH(B4,'Developed Country List'!$A$2:$A$37,0), "Developed", "Emerging")
I have a need to determine in VBA if a cell has been deleted or edited. I need to perform lots of work and form entries on edited cells. I would like to just ignore deleted cells. Presently, I'm using
If Workbook_SheetChange not Worksheet Change and loop through each cell to determine it's state and thereby its affect on my workflow.
adds the file name into column A if it could also hyperlink it to that file. 2nd, Change it so it doesn't start a new workbook and worksheet. I would like it to just run in the Workbook it is in and each time the macro runs or the workbook opens it updates any info that has changed.
having trouble editing the code to allow for dynamic ranges. I have tried to research online, but am having a hard time with it. I think I would understand better if I could see a practical example.
Here is the sample macro I recorded in Excel that I am working with:
Sub Macro1() ' ' Macro1 Macro ' ' Cells.Select ActiveSheet.Range("$A$1:$C$87").RemoveDuplicates Columns:=Array(1, 2, 3), _ Header:=xlNo End Sub
How can I edit this to allow for dynamic rows and columns?
i currently have created a macro for copy a selection of cells from one work book to another. The file were i am copying the cells from is Track_&_Trend_00.xls. In this there is a password to open and modify. The sheet that the cells are being pasted to is TRACK & TREND.xls. There is no password on this. My macro runs fine only that midway through it asks for the password to open and the password to modify for the sheet Track_&_Trend_00.xls.
I wonder ifany one would know about entering input lines of code below to automatically put these passwords in and not having the two password dialog boxes pop up midway through running the macro.
I've got a macro function which calculates the area of a polygon freeform using the 'shoelace'-methode. I would like to excute this function after i leave the shape editing mode.
For example: I have a square, freeform shape. By right-mouseclick I can edit the shape nodes. If i drag one of the nodes of the square to another position and click outside of the shape, the new shape is updated. Right, on that moment i would like to trigger my macro to recalculate the area.
Is there an event in excel to aim for, like the Worksheet.change-event or something similar?
I've got a sheet in which I want a drop down box, to ADD the value* to a cell, not overwriting its current value!
*The name of the selected option in the drop down box, the names are located in Map3!A1-n, I set the drop down box to display the related number in a cell next to it.
The cell would contain some text, and by selecting something in the drop down box, it would add the name of that option to the already existing value in the cell.
So if at first the cell's value is
Hi! I 'm Mark,
and you select the following option from the dropdown box
I 'm from Holland!
the cell would end with the value
Hi! I 'm Mark, I'm from Holland!
This would probably work with a macro, already made a start with it but I couldn't get it to ADD the value instead of overwriting it.
share a macro to copy cells from range C20:C300 and paste them in C2 on multiple lines. If possible two lines gap between each cell's value when they are pasted in C2.
I have a userform ("UserForm12"). It has a ComboBox ("ComboBox1"), and 2 Textboxes ("Textbox1" and "Textbox2), and 1 commandbutton ("Commandbutton1"). What I am looking for is the ComboBox to populate with all items on WS "Recommendations" in columnA starting at Row8 (this needs to be dynamic to adjust for when items are added to end). The user will select the item in the combobox then fill out "Textbox1" and "Textbox2". The user will then hit "Commandbutton1". This will take "Textbox1" and "Textbox2" to the columnR cell of the same row of the columnA value chosen in the combobox. It will be formatted as such:
"TodaysDate" + "Textbox1" + ":" + "Textbox2"
Todays Date will be in "mm/dd/yy" format.
The catch here is that These columnR cells already have text. My goal was for it to at this date onto the end of the existing text hopefully while using the ALT+ENTER function which skips it to the next line in the cell.
