I want to add (same) text to the end of a whole bunch of cells. What would be the formula or function in Excel 2007 for this? I want to add ":59" to the end of each of these:
Suppose I have done a spreadsheet of,say 100 entries in alphabetical order in a column and I discover that I have missed 6. Is it possible to move the existing part from where I missed below this to make room for more entries without losing any of the entries?
I need to replace the values in the braces with the values in Column A. Is there an easy way to do this or am I stuck with doing each one manually? There are 92 lines in Column A.....
firstly i am cross-posting this topic so here is the URL to the same thread in a different forum.
[url]
whats up everybody? i have to use two excel worksheets that someone else already created to make CSV (comma seperated value) files. these CSV files are to be dumped into a database. the problem is that the table has more fields than the spreadsheet does (the spreadsheet has 3 fields - network, mask, size - and the table has 10 fields). i can insert one entire column before (to the left of) network (for the ID field in the table) without a problem, but when i try to insert entire blank columns after size (to the right of the pre-existing columns) it only makes columns for the first 14 rows. i know this because when i save it as a CSV file there are only 6 extra commas for the first 14 rows. is there a way to insert an entire blank column for the entire spreadsheet (as in all the way to the bottom)? i dont want to have to manually type in all those commas. i am using excel 2002.
i have a list of about 20,000 phone numbers that I need to edit.
all start 01 123456 01 123457 01 123458 etc
I am trying to create a macro that will change them to
+001123456 +001123457 +001123458 Etc
However, no matter what I try it always comes out as
+001123456 +001123456 +001123456
F2 Copy and paste is going to take me forever, and I am sure that there must be a quicker way to do this.
this is my first time creating macros so am completly lost. I want to keep the text that is in the cell that I am editing, just add the country code and delete the space.
I have a list of 1500 addresses in a column, something like, 5VistaTerrace, and I need to insert a space between the number and each of the words so that it reads 5 Vista Terrace in the cell.
All of the addresses are different, some with 4 or 5 words like 5ABrownBayCourt... that particular one I would want to read 5A Brown Bay Court in the end.
Is there a formula or excel trick I can perform to save me the time of manually adding the spaces?
What is the VBA code for inserting text in all column B-cells of multiple selected rows?
I am creating a worksheet with a table containing various data related to orders of various materials (this is more or less data gathering from an older, paper-based 'system'). This table spans, columnwise, from A to D and expands downwards as more orders are added. The information in each column is: A=order number, B=type of material and C=material specs. and D=additional comments.
I've set it up so that the only thing I really have to do is to insert the type of material in the cells of column B, and the rest will sort itself out. Instead of having to insert a new row for each new entry and manually typing in the name of the material (these entries are often done in the midst of already existing data), I created several similar, macroed buttons for the different types of materials we use. These macros work by selecting the row of the currently active cell, inserting a new row and then add the name of the material in the column B-cell of this new row. What I am having trouble doing though, is to get the text-entry to work for a selection of multiple cells.
As an example, lets say that I would like to add 5 orders of "Grade A Steel" in the middle of the table - in the row above row 8. With the macro I currently have I can select cell B5, click the macro, and a new row will be inserted with "Grade A Steel" in column B of this new row. This action could be performed 5 times over, but would be easier if I could just mark a range of 5 cells, say B8:B12, click the macro and get the text/data inserted the column B-cells of all 5 of the new rows. So far I've been able to create a macro that inserts multiple new rows, but I've only been successful in filling the column B-cell in the first row leaving the 4 below empty.
I am trying to Lookup a country to see if it is classified as a "Developed Country".
My formula would be in cell AA4. I want to see if the country in cell B4 is on a list of developed country's on another worksheet. IF the country is found on that list cell AA4 displays Developed. If the country is not on the list, cell AA4 displays Emerging.
I have tried an IF statement using the Match function and it does not work.
=IF(MATCH(B4,'Developed Country List'!$A$2:$A$37,0), "Developed", "Emerging")
I've got a sheet in which I want a drop down box, to ADD the value* to a cell, not overwriting its current value!
*The name of the selected option in the drop down box, the names are located in Map3!A1-n, I set the drop down box to display the related number in a cell next to it.
The cell would contain some text, and by selecting something in the drop down box, it would add the name of that option to the already existing value in the cell.
So if at first the cell's value is
Hi! I 'm Mark,
and you select the following option from the dropdown box
I 'm from Holland!
the cell would end with the value
Hi! I 'm Mark, I'm from Holland!
This would probably work with a macro, already made a start with it but I couldn't get it to ADD the value instead of overwriting it.
I have a userform ("UserForm12"). It has a ComboBox ("ComboBox1"), and 2 Textboxes ("Textbox1" and "Textbox2), and 1 commandbutton ("Commandbutton1"). What I am looking for is the ComboBox to populate with all items on WS "Recommendations" in columnA starting at Row8 (this needs to be dynamic to adjust for when items are added to end). The user will select the item in the combobox then fill out "Textbox1" and "Textbox2". The user will then hit "Commandbutton1". This will take "Textbox1" and "Textbox2" to the columnR cell of the same row of the columnA value chosen in the combobox. It will be formatted as such:
"TodaysDate" + "Textbox1" + ":" + "Textbox2"
Todays Date will be in "mm/dd/yy" format.
The catch here is that These columnR cells already have text. My goal was for it to at this date onto the end of the existing text hopefully while using the ALT+ENTER function which skips it to the next line in the cell.
I have pulled a report from a website. The website only allows a certain number of characters. For instance it might go to john.smith@, dave.bird@, tom.jones@... this has been pulled into an excel sheet. I want to add the domain at the end of the email address so it would become
I have data (from a very large spreadsheet) that has data as shown below in various columns. The data should be as in col A but there is a lot of it in different formats as in B. Is there any way to change the data from B into a new column say E where I can get the data into a leading number of 3 digits, the text with 1 or 2 letters and the remainder into 4 digits with the final text subscript if it is there?
Bill
A B
008D001308D13 008D000608D6 008D009208D92 008EJ00028 EJ 2 008EJ000308EJ3 008EJ0004A8EJ04A 008EJ0004B08-EJ-4B 095D006195D61
I'd like to insert a formula into a cell based on selections made on a userform. The problem is, the formula contains quotes, and in VBA, when I do this:
I have a text box in a USERFORM .Have the following code associated with the text box. (which perform basic arithmetic.... e.g. If engineers wanna key in 39+137, instead of 176.)
[Code] .....
When I run the userform, the userform’s INITIALIZE procedure populates the textbox with value from a cell in the spreadsheet. When I delete the value completely , it gives error almost instantaneously:
Error is "Could not set the value property. Type Mismatch".
im on a spreadsheet that im plugging into falconview, a map viewing program-on the spreadsheet i have coordinates, but not directions (N,W,S,E)-how can i enter in say a "W" before each coord without manually plugging it in- i would greatly appreciate it-its for OTJ military work
If I have a cell value (formatted general) of say ... OneOne .... somewhere in row 2, can i insert a formula between the two One's that inserts the row number. The intention is to have the cell display .... One2One. Conceptually the cell would read One=row()One. If you know what I mean.
I have a workbook which contains 8 worksheets. I want to able to run a macro that looks for specific words in column A of each worksheet and hides any rows in between the specified words. The following code works except if a worksheet does not contain the specified words. Is there a better way to accomplish this?
Attached is an example of the spreadsheet. The code below works just fine on the tabs highlighted in green, but halts on the tab highlighted in red. The tab highlighted in yellow is showing you the rows I need to hide.
I have a folder with multiple text files. I want to import one of these files to a sheet called data in an existing Excel file. The excel file has references to this data sheet on other sheets which I want to keep. I want to save this excel file with the name the text file has and repeat this for all the text files in the folder.
I found a macro a while back which does the job nicely of importing and saving the Excel file, however all the data in the other sheets gets lost once it is saved. How to keep the data?
Code:
Sub tgr() Const txtFldrPath As String = "FOLDER WITH TEXT FILES" 'Change to folder path containing text files Const xlsFldrPath As String = "FOLDER FOR EXCEL FILES" 'Change to folder path excel files will be saved to Dim CurrentFile As String: CurrentFile = Dir(txtFldrPath & "" & "*.txt") Dim strLine() As String Dim LineIndex As Long
I have a rather extensive, for me that is, excel report of daily stats with rows for daily, weekly totals, monthly totals. All have various formulas along the way for various needs - some are simple sums, some are averages, some are percentages.
I need to make some new reports for various purposes that pull the existing information/calculations over into another sheet(s).
For instance - I want to do a report for *just* the week totals so I can do more analyzinig, but I don't know how to pull the already calculated info over so if it ever changes (as it sometimes does) - then my whole dataset reflects the change.
I am trying to write a macro that will allow me to copy the text of a cell, and then insert text around that previously copied string. I am having a problem adding the copied text into my formula. Here is my code below:
Sub Bid() ' Selection.Copy ActiveCell.Value = "inventory levels are " & ActiveCell.PasteSpecial(xlPasteValues) & " and oversold by" ActiveCell.Offset(1, 0).Select End Sub
How can I have a number inserted into text on an excel sheet. for example if I have the number 100 in cell A1 and I want it inserted into the following sentence in sell A2:
You are 100 years old. I want the number to be able to change automatically in this sentence when the number in A1 also changes.
need to add same data to every other existing cell in the column, but not replace the data already in it, but to add to it. I've tried to google the answer and look here, but I probably use bad search terms.
For example, I need to add "QW" after each of these lines:
data1432 data9292 data3933 data3939
so it would look like this:
data1432QW data9292QW data3933QW data3939QW
I have a few thousand rows of data, so wouldn't rather not do it manually cell by cell by typing :-)
What I need it for is an automated report that should be used for several different projects. Each projekt have events on different dates, and I only want the report to show a specific date if there is some text (i.e. event) on that date. As it is now, it's a looong report with several blanks with only a date showing. So it should insert a row (the tricky part) + the date + the text if condition is met, and do nothing if they are not. The script should add and remove rows and text depending on what project the information is taken from.
The data it should grab is in this form (many more data inputs though..): Date Date Date TEXT
